ruslan120 Posted April 7, 2009 Share Posted April 7, 2009 K, I made some progress yesterday, and I've included a pic of the power supply inside. Link to comment Share on other sites More sharing options...
ruslan120 Posted April 10, 2009 Share Posted April 10, 2009 K, Progress pics are up on Bit-tech http://forums.bit-tech.net/showthread.php?t=166579 Link to comment Share on other sites More sharing options...
ѕӎѳѳ₮ңӌ Posted April 11, 2009 Share Posted April 11, 2009 K, Progress pics are up on Bit-tech http://forums.bit-tech.net/showthread.php?t=166579 nice choice of project name..... Link to comment Share on other sites More sharing options...
ruslan120 Posted April 12, 2009 Share Posted April 12, 2009 Oh, I did not even notice. I sincerely apologize and will re-name at once. How's Apple i7? Never mind... I have an awesome and definitely not used name Link to comment Share on other sites More sharing options...
ruslan120 Posted April 12, 2009 Share Posted April 12, 2009 *Fixed Oh, to avoid further bandwidth exceeding (25 GB in a week and a half) I've decided to continue posting on the worklog and then just re-post the completed worklog here. Cheers Link to comment Share on other sites More sharing options...
Distemperus Posted April 12, 2009 Share Posted April 12, 2009 I figured I'd show where I'm up to on my G5 case mod. I've forgotten some things (like the litte pieces I've already cut as filler pieces, waiting to be epoxied in & the EMI shield on the expansion slots & rear fans). I'm about 80% done, with jigsaw cuts for cable management, some JB Welding of things I screwed up, the top 2 fan housings & the zone plate between PCI slots & CPU. The drive racks & sleds are completely done the drives sit on sleds... here are pics: http://www.overclock.net/case-mods-general...tml#post5886801 Link to comment Share on other sites More sharing options...
Distemperus Posted April 17, 2009 Share Posted April 17, 2009 Since I wasn't able to test audio or firewire yet (no OS installed), I only connected power & USB. Here is what my front panel connector looked like: With only the PWR+, PWR-, LED+ & LED-, the power button & LED worked: 5 PWR+ (pin6 on F_PANEL of Gigabyte EP45-UD3P motherboard) 6 LED+ (pin2 on F_PANEL, labeled as MSG+) 14 LED- (pin4 on F_PANEL, labeled as MSG-) 18 PWR- (pin8 on F_PANEL) Adding USB using a 4pin header connection: 7 USB+ (pin5 on F_USB of Gigabyte EP45-UD3P motherboard) 8 USB- (pin3 on F_USB) 9 +5V (pin1 on F_USB) 10 GND (pin7 on F_USB) --------------- I used a laptop 40 to 44 pin IDE converter (search ebay for a cheap 99cent one). What was important was the 2mm pitch end had individual separate cables (as opposed to the flat ribbon 40 pin 2.54mm pitch side). A needle inserted lifts up the tab allowing the cable & tail to slide right out. I trimmed the cable to 3-4 inches, soldered it onto solid wire cabling to the motherboard & trimmed the original 44pin connector to 2x9. The tails went back into the connector & that's the end of the 99cent mod. Link to comment Share on other sites More sharing options...
ѕӎѳѳ₮ңӌ Posted April 17, 2009 Share Posted April 17, 2009 xs solid: any news about the front panel PCBs matey? Ruslan120: dont worry about it mate! thanks for changing it though! Link to comment Share on other sites More sharing options...
(XS)s0lid Posted April 18, 2009 Share Posted April 18, 2009 xs solid: any news about the front panel PCBs matey? Ruslan120: dont worry about it mate! thanks for changing it though! PCBs are ready but haven't had any time to make the cables :X But could send an diy cableset, including calbling, pins and connectors. tho this would be little cheaper for you and i could ship it out faster. Link to comment Share on other sites More sharing options...
ѕӎѳѳ₮ңӌ Posted April 19, 2009 Share Posted April 19, 2009 About ~6-8$ + shippings for the board + cable connectorsLike in this picture i dont really need cables anyway, i have usb, and some single cables to make up the audio and firewire looms myself. but i would like the board like in your image. is that possible? thanks for getting the boards done, saves me for a majorly messy soldering job! Link to comment Share on other sites More sharing options...
ruslan120 Posted April 22, 2009 Share Posted April 22, 2009 K, project completed Here are key progress pictures, full worklog at http://forums.bit-tech.net/showthread.php?t=166579 This is basically the long and short: I cut a hole in the bottom of the case for the psu and a section of the inside for the new heatsink to fit. I bought a Zigmatek Dark Knight heatsink and stupidly cut the heatpipes to make it fit, ruining it (as I learned at a later time when it idled at 70 C). I ordered a new, scythe mugen heatsink and it works perfectly now, idles at room temp. To fit the motherboard I re-used the original standoffs and epoxied them into place (epoxy is EXTREMLY strong), and then I simply mounted the motherboard tray onto them. I re-used the hard disk area and epoxied extension cables for the rear ports. I soldered the old rear fans and they worked, but didn't move enough air at 5v (at least for me), so I upgraded the fans to more quiet and more powerful 100 mm fans and simply epoxied/super glued them onto the bracket. For the video cable I simply used a right angle adapter coupled with an hdmi to dvi cable routed through a pci slot. I don't see the back of the case normally so I figured that's alright. I encourage you to read to worklog; there you'll see how I did the whole thing and maybe it will help! Pre-soldered rear fans @ 5v for sale, pm me for a price! Link to comment Share on other sites More sharing options...
(XS)s0lid Posted April 22, 2009 Share Posted April 22, 2009 Ok, 10 boards machined in total, 8 with connectors done, ran out of 2.54mm connectors with 2. If i recall correclty they all are reserved: 3 for Diabolik 1 for Smoothy 1 for pitouthestar 1 for wlazara 2 for onemanstrash 1 for teknojunkie Correct me if didn't remember these right. Will take pics tomorrow =) Link to comment Share on other sites More sharing options...
teknojunkie Posted April 23, 2009 Share Posted April 23, 2009 yay! you remembered me! thanks! Link to comment Share on other sites More sharing options...
ѕӎѳѳ₮ңӌ Posted April 23, 2009 Share Posted April 23, 2009 man, my iphone broke over the weekend, and ive lost my progress pictures! doh! Link to comment Share on other sites More sharing options...
blu3_v2 Posted April 23, 2009 Share Posted April 23, 2009 (XS)s0lid - just wondering if I was able to add my name to the list of people interested in a Front-Panel Board - or am I too late? Link to comment Share on other sites More sharing options...
(XS)s0lid Posted April 23, 2009 Share Posted April 23, 2009 My case is almoust ready Pics here: http://www.xtremesystems.org/forums/showpo...mp;postcount=49 And here: http://www.xtremesystems.org/forums/showpo...mp;postcount=53 Link to comment Share on other sites More sharing options...
ѕӎѳѳ₮ңӌ Posted April 25, 2009 Share Posted April 25, 2009 My case is almoust ready Pics here: http://www.xtremesystems.org/forums/showpo...mp;postcount=49 And here: http://www.xtremesystems.org/forums/showpo...mp;postcount=53 its looking really good! are you just going with that one radiator then? on my case, ive got two things to do, finish wiring the g5 board, and plug in your PCB when it arrives. i could do with your help again on the g5 board. i have removed the metal covering for the ethernet, that was easy, but what is the best way to remove the black part on the back? i dont want to damage anything. any help will be massively appreciated! Link to comment Share on other sites More sharing options...
(XS)s0lid Posted April 26, 2009 Share Posted April 26, 2009 its looking really good! are you just going with that one radiator then? on my case, ive got two things to do, finish wiring the g5 board, and plug in your PCB when it arrives. i could do with your help again on the g5 board. i have removed the metal covering for the ethernet, that was easy, but what is the best way to remove the black part on the back? i dont want to damage anything. any help will be massively appreciated! Use wire cutters like this for removing the blackbox and everything in it(there's just couple inductors): I'll try to ship some of the boards at next week, please pm your shipping addresses. Link to comment Share on other sites More sharing options...
ѕӎѳѳ₮ңӌ Posted April 26, 2009 Share Posted April 26, 2009 Use wire cutters like this for removing the blackbox and everything in it(there's just couple inductors): I'll try to ship some of the boards at next week, please pm your shipping addresses. thanks, ill try and hack it up then. got one usb working 100% using a mighty mouse through it now, and copied 1gb through np, but the other usb inst so good. the red light comes on the bottom of the mouse, but it doesnt move the cursor. guessing somethijg isnt soldered properly? Link to comment Share on other sites More sharing options...
(XS)s0lid Posted April 26, 2009 Share Posted April 26, 2009 thanks, ill try and hack it up then. got one usb working 100% using a mighty mouse through it now, and copied 1gb through np, but the other usb inst so good. the red light comes on the bottom of the mouse, but it doesnt move the cursor. guessing somethijg isnt soldered properly? I had this same problem when green wire were touching ground. Link to comment Share on other sites More sharing options...
ѕӎѳѳ₮ңӌ Posted April 26, 2009 Share Posted April 26, 2009 well i got good news and bad news.... both usbs are now working and i have sealed them with hot melt. but i managed to break off the ethernet connector! argh. so my plan is to epoxy the usb apple ethernet adapter i have to use anyway(my boards ethernet is rubbish) in place of the broken one. saves me trying to solder the ethernet, as i am s h i t at soldering Link to comment Share on other sites More sharing options...
verdee Posted May 1, 2009 Share Posted May 1, 2009 Has anybody had problems getting their system to sleep on its own? Mine will sleep via the menu bar command, and also by scheduling it at a certain time. But it will not go to sleep if I just leave it and, say, have it sit for 30 minutes (at which point, according to my settings, it should sleep)? I was not having this problem in my old case. Every reply I have gotten has talked about grounding, and I have tried everything short of completely rewiring my front panel (which works). Any other ideas? Link to comment Share on other sites More sharing options...
(XS)s0lid Posted May 5, 2009 Share Posted May 5, 2009 Ok, ѕӎѳѳҭңӌs, pitouthestars and wlazaras pcbs shipped, should be there in 5-7 days, shipping were fairly cheap 80snt without the cables and 1.1€ with cables (pitouthestars shipment), sent as airmail Rest of you who have ordered me pcbs, pm me your shipping addresses so i'll get those sent Link to comment Share on other sites More sharing options...
blu3_v2 Posted May 7, 2009 Share Posted May 7, 2009 Ok, ѕӎѳѳҭңӌs, pitouthestars and wlazaras pcbs shipped, should be there in 5-7 days, shipping were fairly cheap 80snt without the cables and 1.1€ with cables (pitouthestars shipment), sent as airmail Rest of you who have ordered me pcbs, pm me your shipping addresses so i'll get those sent (XS)s0lid, just wondering - are you still taking new requests for these boards? Link to comment Share on other sites More sharing options...
james_uk Posted May 7, 2009 Share Posted May 7, 2009 (XS)s0lid, just wondering - are you still taking new requests for these boards? Snap, and what prices are you looking at for delivery and everything? (where are you based?) Sorry if Youve been through this in the thread already, i read through all 40 odd pages last night and cant remember! Cheers Link to comment Share on other sites More sharing options...
Recommended Posts