royco Posted November 7, 2007 Share Posted November 7, 2007 I finally got my sleep /wake up working in Leopard.( see post #171). I got a tip from Lucida to use the the other DVI connector near the board and it worked! I just lost my USB tho. I'll try Paulicats AppleSMBIOS to see if that will fix it. Link to comment Share on other sites More sharing options...
NecronoiD Posted November 11, 2007 Share Posted November 11, 2007 I can't wake from sleep either. Everything comes back instantly, but I can't interact with anything. My cursor becomes the wheel, but not the spinning wheel and I can't click anything. I have a P5b and E6400. I have the exact error on my dell d610 running 10.4.9. I'm using a custom powermanagement.kext, remove the acpithrottle.kext, and using this custom smbios. At least the powerled blinks slowly as it were sleeping. I also tried disabling the hibernate mode with no result Link to comment Share on other sites More sharing options...
Nozumi Posted November 12, 2007 Share Posted November 12, 2007 Hey guys, I've just installed OS X 10.4.10 with uphuck 1.4i and PascalW 10.4.10 patch. Well, seems that after clean install, I can use sleep (not hibernate). Once I pressed that, everything's working, and my laptop (HP dv6101tx) gone to sleep. Once I press my power button, everything works again include the display. That means my sleep and wake is totally fine. However, something didn't work right for me is: When my display goes to sleep itself (means, all the other stuff is working, is just the screen goes off), I can't wake my display again, you will be able to see lights coming out from the screen, but it's black. Is that the same situation like you guys? Or is a different one? Link to comment Share on other sites More sharing options...
helob Posted November 15, 2007 Share Posted November 15, 2007 Hello everyone, I've been working on the issue where your pc wakes successfully, but usb mouse/keyboard are frozen. It seems to be coming from the AppleSMBIOS.kext and I've managed to get a new version of the kext out that has fixed it for me. I've uploaded it here: http://www.mediafire.com/?ebgy5icpxmb As usual, no guarantees, but this fixed it for me. Its based off the 10.4.9 (latest source available) and the version # is 1.0.11. Tested on 10.4.9 and 10.4.10. This has all the fixes for About This Mac crashing (I've only tested Intel). Only issue I've found with this version that I'll try to fix when I get time, is that running ioreg -l will make the output stop at smbios. It doesnt seem to affect anything as far as I can see. Good luck! Paulicat Try to download AppleSMBIOS.kext from http://www.mediafire.com/?ebgy5icpxmb but its no more there. Would appreciate if someone can point me to where I can get above Paulicat's AppleSMBIOS.kext. Thanks Link to comment Share on other sites More sharing options...
xopher Posted November 20, 2007 Share Posted November 20, 2007 Yeah, the link is dead. Could someone upload it somewhere else? Thanks a lot. Link to comment Share on other sites More sharing options...
shila Posted November 22, 2007 Share Posted November 22, 2007 I also would like to get a new download link! thanks shila Yeah, the link is dead. Could someone upload it somewhere else? Thanks a lot. Link to comment Share on other sites More sharing options...
iron Posted November 26, 2007 Share Posted November 26, 2007 Ok, boys and girls, After pestering poor Paulicat ( sorry to such a pain ), he uploaded that smbios for me. So here it goes for the rest of you guys that need the file. Thanks goes to Paulicat of course and for his tireless work and to all the other devs out there! http://www.megaupload.com/?d=9NJQQC8A Link to comment Share on other sites More sharing options...
GeekMan Posted December 3, 2007 Share Posted December 3, 2007 It seems that this is really the one issue that the OSX86 community is having quite the tangle with. I'm currently working with 10.4.10, updated from the JaS install. My hardware is an HP Pavilion with a P5LP-LE motherboard. After much tweaking, absolutely everything is working except that elusive Hackint0sh feature: sleep. Here are my results: Sleep seems to work correctly at first. All the moving hardware shuts down and the power light changes to amber. - With the 8.8.1 kernel, and using an NVidia card, the system seems to wake, but the display never comes back on and the system doesn't respond to keyboard commands. - With the 8.8.1 kernel, using the built-in Intel g950, the system wakes, but the display shows a BIOS-test message from the intel graphics adapter. The UI is inaccessible. - Better results occur with the experimental 8.10.1 kernel. The display wakes, but the loginwindow is not accessible for some reason. A spinning compass over the desktop color as if the system were shutting down. Also, with the 8.10.1 I don't seem to be able to mount disk images for some reason. I hope that the brains of this community can put their heads together to solve this one! I for one would be grateful. Link to comment Share on other sites More sharing options...
munky Posted December 10, 2007 Author Share Posted December 10, 2007 dont suppose PC-EFI helps the situation at all does it? ive not had time to test it yet. Link to comment Share on other sites More sharing options...
pilsator Posted December 12, 2007 Share Posted December 12, 2007 dont suppose PC-EFI helps the situation at all does it? ive not had time to test it yet. No success here with sleep. See my post (#802) in another thread. cheers, pilsator Link to comment Share on other sites More sharing options...
phvrc2nt Posted December 13, 2007 Share Posted December 13, 2007 I know this "sleep" problem has been haunting osx86 awake... but one thing i noticed... I'm using version 10.4.6 and sleep works fine. i tried 10.4.10 and every version after 4.6 and nothing seems to work. something must be right with the 10.4.6 kernel that just cant seem to correct itself afterwards... I might be wrong though... my2cents... Link to comment Share on other sites More sharing options...
i_am...me Posted December 13, 2007 Share Posted December 13, 2007 dont suppose PC-EFI helps the situation at all does it? ive not had time to test it yet. It kind does. mine will work if i boot with -f -v, no other combo i tried just -f and it didnt work. Link to comment Share on other sites More sharing options...
pilsator Posted December 13, 2007 Share Posted December 13, 2007 It kind does. mine will work if i boot with -f -v, no other combo i tried just -f and it didnt work. Just booted with -f -v. That didn't have any effect on the sleep abilities of my board with 10.5.1. Link to comment Share on other sites More sharing options...
i_am...me Posted December 15, 2007 Share Posted December 15, 2007 Just booted with -f -v. That didn't have any effect on the sleep abilities of my board with 10.5.1. i dunno what it is, i think it might be the vanilla ACPIPlatform.kext im using Link to comment Share on other sites More sharing options...
pilsator Posted December 16, 2007 Share Posted December 16, 2007 Success! Sleep seems to work at last on my machine. See my post #43 here. Link to comment Share on other sites More sharing options...
bill2 Posted December 18, 2007 Share Posted December 18, 2007 I've noticed the same thing that sleep only has ever worked properly with 10.4.6 and after that it has never worked correctly, again. Link to comment Share on other sites More sharing options...
pilsator Posted December 19, 2007 Share Posted December 19, 2007 Motherboard support is improving. That seems to be important for sleep (my theory). Kalyway also announced ICHX-support for his 10.5.1-DVD. Link to comment Share on other sites More sharing options...
NecronoiD Posted January 7, 2008 Share Posted January 7, 2008 What about ICH6 laptops like mine? I've tried with ich7 10.4.9 upuhck driver with no success Link to comment Share on other sites More sharing options...
failo Posted January 24, 2008 Share Posted January 24, 2008 I`m running 10.4.7 JaS with Gwan Update to 10.4.8 and Semtex kernel 8.8.1 sleep don`t work. All the hardware goes to sleep + the monitor too. At wake the system doesn`t wake but reboots. I have an Nvidia graphics 7300GT running with Natit 0.2 dual. I hadn`t applyed SMBios and PowerManagement kexts, do these kext have something to do with sleep function? I had X800 in my system the sleep didn`t work as well, but i got black screen! My config are Pentium D930, mobo P5LD2, IDE boot-drive + one SATA in AHCI mode, graphics 7300GT with 256MB. Please can somebody help me? Maybe changing the kernel will help, but please post some comands to install and to backup the old one in case something goes wrong! Does sleep work with EFI? Can I get EFI with Pentium D? Cheers!!! Link to comment Share on other sites More sharing options...
yangj08 Posted February 1, 2008 Share Posted February 1, 2008 My laptop's a Panasonic T5 with 512MB RAM, 60GB HDD and 1.2GHz Core Solo. I first installed with JaS 10.4.8 where I had the same problem as described in the OP. Then I used the koolkal updater to update my system to 10.4.10. Sleep worked normally then, except for a little quirk- I had to use the power switch to put it in sleep but it woke when I opened the lid. Then I had problems and reinstalled with XxX 10.4.11 with vanilla kernel and EFI. Now it'll go to sleep, but it won't even respond anymore. I have to pull out the battery to reboot it. Any help here? Link to comment Share on other sites More sharing options...
OsXsO Posted February 1, 2008 Share Posted February 1, 2008 hi here is my experience with wake from sleep.. i finally isolated my problem waking up from sleep. My system goes into sleep without any problem but by waking up the screen returns but i have no mouse curser and system seems to be frozen.. so i find out that something similiar happens when i reactivate my airport (atheros 5005) after turning it off due systempreference or finderbar. so i checked if i desactivate my airport first and then i go into sleep my system wakes up perfectly... i remember that my airport switch on and off problem started ca 10.4.8 "it was an seperate airport update" same happens to tiger and leo with the new io80211family.kext. as my airport is fully funcitional i did not value this small "bug" until now. so thats the reason why sleep is not working for me... cheers Link to comment Share on other sites More sharing options...
ranova Posted February 20, 2008 Share Posted February 20, 2008 Doesn't seem much has changed, using 10.5.2, sleep still appears to wake up but the screen is frozen. Link to comment Share on other sites More sharing options...
themacmeister Posted April 8, 2008 Share Posted April 8, 2008 I have had limited success on my 845GL chipset with S1 set in BIOS (using iAtkos 10.5.1). Custom Universal NON-SPEEDSTEP sleep kernel 9.2.0 from ToH on IRC. Custom SMBIOS.kext caused no wakeup - blue desktop with disk activity, but nothing else. Standard SMBIOS from install, gives success 90% of the time - sometimes the harddrive clicks incessantly while asleep, which causes me great concern. The other times, it is a clean sleep (my external 500GB MyBook complains about being ejected uncleanly, but then remounts flawlessly). It all seems to work with S1, NOT WITH S3. This is the first time in 2 years this machine has SLEPT with OSX86!!! Link to comment Share on other sites More sharing options...
muitommy Posted April 12, 2008 Share Posted April 12, 2008 i once got sleep working in my leopard too (10.5.2) , the exact same setup below ... but once i did a fresh install, the sleep ability of my machine is gone ... could anyone who can sleep (S3) kindly post up their version of following kexts - AppleACPIPlatform.kext - AppleSMBIOS.kext - Kernel (type: "uname -a" in terminal and post up the result) - EFI or not - EFI-String or not p.s. //Leopard user plz! thanks, i hope i can figured this out ... Link to comment Share on other sites More sharing options...
Slice Posted June 24, 2008 Share Posted June 24, 2008 I made a comparison of Apple sources IOPCIFamily and IOGraphicsFamily of Tigers and Leo versions. The main difference in sleep support! May be other kexts. So you can't improve sleep support in Tiger without rewriting ALL drivers. Link to comment Share on other sites More sharing options...
Recommended Posts