Thinkyhead Posted September 3, 2008 Author Share Posted September 3, 2008 However, I couldn't get TabletMagic2b14 installed with the installer reporting "There is nothing to install". Thus my question: is TabletMagic2b14 Leopard only, or should it also still install on Tiger? Thanks for the kudos, Wolf! The installer issues are caused I think by my misunderstanding of PackageMaker. I believe I need to increment the version number on the installer package so it knows it's newer than the other versions. In the meantime you can force the installer to install by first deleting anything that refers to TabletMagic in the /Library/Receipts folder. Link to comment Share on other sites More sharing options...
nightalon Posted September 11, 2008 Share Posted September 11, 2008 Hi Scott, I've had a couple issues on my Tecra M7 Tablet PC here with WACF004 in the plist file. The resolution keeps changing on me so that the entire panel only maps to a 100 square pixel square at the top-left corner of the screen. Changing the values in the "Do not query" boxes doesn't make any difference any more. One other thing, though: I have bluetooth working, so those serial ports show up as well. Also, autostart does not work, but I'll try your new version. You should post it on SourceForge as well! Here I thought I was using the latest version. Many thanks for your wonderful contribution! I love my triple-boot tablet, and I'm thinking of writing a guide soon. Essentially at this point there's nothing inhibiting me from using Mac profusely! (except screen rotation...rotation works on the external, but not on the internal...I wonder how the ModBook guys worked that one out, if they even bothered to try!) In terms of a graphics driver, I'm using GFX strings for my NVS Quadro 110M. I have external monitors on DVI (through a dock) and VGA (through a dock or not) although I haven't tested 3 monitors simultaneously in any of my operating systems. Again, thanks for all your hard work. NighTalon NYC and New Haven EDIT: Never mind, your latest version is wonderful with the "Get from digitizer" option! Please upload it to SourceForge and/or your website! Thank you so, so much! Link to comment Share on other sites More sharing options...
sandr Posted September 25, 2008 Share Posted September 25, 2008 iHP TC4400 ------- info from M$ Windows ------- WACF004&COL04\6&C33359A&0&0003 pen WACF004&COL03\6&C33359A&0&0002 000D_U:0001 IRQ06 IO 0200-0207 Buttons ACPI\HPQ0006\2&DABA3FF&0 ------- iDeneb 10.5.4 Install TabletMagic 2.0b14 in Apple16X50ACPI <key>IONameMatch</key> <string>WACF004</string> i not past this info in file! mybe after press "Enable Digitizer" ? ---after reboot in list of ports - Automatic Bluetooth-PDA-Sync Bluetooth-modem Digitizer range i see 24570x18430 ----- If "Don`t Query" unchecked - "No tablet found" if kill daemon, check "Don`t Query", enable daemon ISD V4.0 (TabletPC) but on "Testing" page nothing Tablet dont work What can i do? Link to comment Share on other sites More sharing options...
Thinkyhead Posted September 25, 2008 Author Share Posted September 25, 2008 in Apple16X50ACPI<key>IONameMatch</key><string>WACF004</string> I didn't paste this info into the file! Perhaps this was done by the "Enable Digitizer" button? ---after reboot in list of ports - Automatic Bluetooth-PDA-Sync Bluetooth-modem Yes, the "Enable Digitizer" button modified Apple16X50ACPI/Info.plist. However, as you can see your digitizer's serial port is still not showing up in the device tree. You might try using "Enable Digitizer" again, just in case the system didn't get the clue on the last reboot. If this still doesn't work, post the results of (in Terminal...) ioreg -l >TC4400.txt to this forum and I'll have a look at it. Also ask for help from other members of this community who have the same computer. Link to comment Share on other sites More sharing options...
sandr Posted September 25, 2008 Share Posted September 25, 2008 You might try using "Enable Digitizer" again, just in case the system didn't get the clue on the last reboot. Thank you After next two process "Enable Digitizer" i see serial0 and working tablet Thankyou - perfect work can i donate ? Link to comment Share on other sites More sharing options...
Thinkyhead Posted September 26, 2008 Author Share Posted September 26, 2008 Thank you After next two process "Enable Digitizer" i see serial0 and working tabletThankyou - perfect work can i donate ? Excellent news! If you would like to donate just go to http://thinkyhead.com/tabletmagic/donate.php and follow the instructions there. Link to comment Share on other sites More sharing options...
sandr Posted September 27, 2008 Share Posted September 27, 2008 Already donate. Thank you :-) New question - can you recomend onscreen keyboard (with support russian language)? i find and try TouchStrokes but this keyboard dont corretly switch between languages and bad suport "Spaces" Link to comment Share on other sites More sharing options...
Eidan Posted September 28, 2008 Share Posted September 28, 2008 I've a Volito...was working in tiger but nothing in leopard... someone can helpe me out? tnx Link to comment Share on other sites More sharing options...
outZider Posted September 28, 2008 Share Posted September 28, 2008 Scott: Is the source you have on sourceforge up to date? I was hoping to poke around a little bit to check out the feasibility of a USB connector for TabletMagic, for unsupported Wacom devices on OS X. I was initially confused by the layout of the repository, but think I have it. Link to comment Share on other sites More sharing options...
Thinkyhead Posted September 29, 2008 Author Share Posted September 29, 2008 Is the source you have on sourceforge up to date? I was hoping to poke around a little bit to check out the feasibility of a USB connector for TabletMagic, for unsupported Wacom devices on OS X. I was initially confused by the layout of the repository, but think I have it. Yes, the source code there is completely up to date. The only folder you should care about is "combined." The other folders are old obsolete code and will soon be removed. Link to comment Share on other sites More sharing options...
sandr Posted October 7, 2008 Share Posted October 7, 2008 will it work on 10.5.5? After update to 10.5.5 i can get woked Tablet Link to comment Share on other sites More sharing options...
Thinkyhead Posted October 8, 2008 Author Share Posted October 8, 2008 will it work on 10.5.5? After update to 10.5.5 i can get woked Tablet You don't say much about what doesn't work. TabletMagic works fine under 10.5.5 on my G5 PowerMac and my Intel MacBook. Did you update to 10.5.5 via Software Update? (Don't do that!) And, does the "Enable Digitizer" button have no effect on which serial ports show up in the control panel? Troubleshoot and post your results. Be sure to get the latest download at https://sourceforge.net/project/showfiles.p...group_id=107096 for best results. Link to comment Share on other sites More sharing options...
sandr Posted October 8, 2008 Share Posted October 8, 2008 i dont know why but after repair permission for Apple16x50ACPI.kext - TabletMagick return to work Link to comment Share on other sites More sharing options...
rbenjamin Posted October 27, 2008 Share Posted October 27, 2008 I'm having some trouble getting tablet magic to recognize my tablet. No serial ports show up in the list, only "Automatic". It says No tablet found, and in the Testing section it doesn't respond to input. However, the tablet itself works after I edited the kext as told to earlier in the thread. It's just off by about an inch, which makes it almost impossible to use. Does anyone have any suggestions for getting tablet magic to work? I'm on a fujitsu lifebook t-series. Link to comment Share on other sites More sharing options...
Thinkyhead Posted October 27, 2008 Author Share Posted October 27, 2008 ...the tablet itself works after I edited the kext as told to earlier in the thread. It's just off by about an inch, which makes it almost impossible to use... If you're using TabletMagic 2.0b15 you might be able to use the calibration controls under the TabletPC tab to get proper tracking. What happens when you try to use those? Link to comment Share on other sites More sharing options...
rbenjamin Posted October 27, 2008 Share Posted October 27, 2008 When I try to use the calibration, it doesn't seem to do anything. When I change the values and then reboot, the values reset. Edit: The values also reset as soon as I quit System Preferences. Link to comment Share on other sites More sharing options...
rbenjamin Posted October 31, 2008 Share Posted October 31, 2008 So, I was able to get tablet magic to recognize the tablet, but I still can't seem to get it calibrated. When I set a value in the digitizer range field, it resets when I restart and it doesn't seem to have an effect on the calibration. However, I may not be putting in the right values because I'm not sure what a good match would be. My screen resolution is 1024 by 768, does anyone have any suggestions for values for the Digitizer Rage or Mapping parts of the prefPane? Link to comment Share on other sites More sharing options...
Thinkyhead Posted November 1, 2008 Author Share Posted November 1, 2008 So, I was able to get tablet magic to recognize the tablet, but I still can't seem to get it calibrated. When I set a value in the digitizer range field, it resets when I restart and it doesn't seem to have an effect on the calibration. However, I may not be putting in the right values because I'm not sure what a good match would be. My screen resolution is 1024 by 768, does anyone have any suggestions for values for the Digitizer Rage or Mapping parts of the prefPane? Hmm, I thought I had addressed the bug where the range was being lost, but I'll check it out. In 2.0b15 there's also a checkbox labeled "Get from Stylus" which you should be able to use to get the proper digitizer range just moving the stylus to the bottom-right corner of the screen. What values do you end up with when you use that function? Link to comment Share on other sites More sharing options...
rbenjamin Posted November 1, 2008 Share Posted November 1, 2008 Hmm, I thought I had addressed the bug where the range was being lost, but I'll check it out. In 2.0b15 there's also a checkbox labeled "Get from Stylus" which you should be able to use to get the proper digitizer range just moving the stylus to the bottom-right corner of the screen. What values do you end up with when you use that function? Scott, thanks. The "Get from stylus" fields don't return any values. I've tried many, many times to get it to work but... No luck so far. It just says 0 and 0. Link to comment Share on other sites More sharing options...
nervouschimp Posted December 1, 2008 Share Posted December 1, 2008 I am thinking about trying the ModBook drivers on a tablet pc. The modbook uses a wacom ISD-V4 serial tablet with a Prolific USB-to-serial bridge. So is it safe to assume that the ModBook drivers will work on any tablet pc with a ISD-V4 serial digitizer? My ModBook is in for repair, and it is going to be there for a while, because Axiotron is very, very slow in everything they do, so I would like to start experimenting on a tablet hackintosh. I was thinking of getting either the X61 or the hp 2710p. It needs to be a tablet that has all the essentials working. Any suggestions? Link to comment Share on other sites More sharing options...
BiliBug Posted December 19, 2008 Share Posted December 19, 2008 Can someone who has had success loading Leopard on a Motion Computing LE1700 tablet please help? What install package (kalyway, etc.) and options did you use? I have built and installed a desktop hackintosh, but just can't seem to be able to get the tablet running OSX, let alone TabletMagic. And yes, I've tried to search to no avail. Any help would be appreciated. -B Link to comment Share on other sites More sharing options...
insanelycl Posted January 9, 2009 Share Posted January 9, 2009 Please help! I installed the latest version of TabletMagic (2b15) on my Toshiba R25 running Iatkos 10.5.5. My WACF004 tablet was loaded but the Daemon does not recognize it as a tablet. What's weird is that the "TabletPC" tab is nowhere to be found in the TabletMagic prefPanel! It worked flawlessly in Uphuck 10.4.9 and 10.4.11. Has anyone encountered such issue before? Thanks so much! Link to comment Share on other sites More sharing options...
acoma Posted January 16, 2009 Share Posted January 16, 2009 Please help! I installed the latest version of TabletMagic (2b15) on my Toshiba R25 running Iatkos 10.5.5. My WACF004 tablet was loaded but the Daemon does not recognize it as a tablet. What's weird is that the "TabletPC" tab is nowhere to be found in the TabletMagic prefPanel! It worked flawlessly in Uphuck 10.4.9 and 10.4.11. Has anyone encountered such issue before? Thanks so much! exact same problem here. Link to comment Share on other sites More sharing options...
Thinkyhead Posted January 19, 2009 Author Share Posted January 19, 2009 exact same problem here. Please provide the diagnostic output of TabletMagic, so I can see how the "Iatkos" kernel identifies itself. Open the application "Console" and press the Clear button, then kill and restart TabletMagic. One of the things TabletMagic prints is the "Machine ID" of your system. If the "Iatkos" kernel is identifying itself as a standard Mac kernel, then TabletMagic will need to be altered to account for it. Also, please provide the output of ioreg -l by opening Terminal and typing: ioreg -l >~/Desktop/ioreg.out On your desktop you will find the file ioreg.out. Attach that file to your reply to this forum. Thanks! Link to comment Share on other sites More sharing options...
insanelycl Posted January 20, 2009 Share Posted January 20, 2009 Please provide the diagnostic output of TabletMagic, so I can see how the "Iatkos" kernel identifies itself. Open the application "Console" and press the Clear button, then kill and restart TabletMagic. One of the things TabletMagic prints is the "Machine ID" of your system. If the "Iatkos" kernel is identifying itself as a standard Mac kernel, then TabletMagic will need to be altered to account for it. Also, please provide the output of ioreg -l by opening Terminal and typing: ioreg -l >~/Desktop/ioreg.out On your desktop you will find the file ioreg.out. Attach that file to your reply to this forum. Thanks! Attached is the ioreg.out file (renamed as ioreg.txt). The log from "console" is also shown below. I've also tried TabletMagic on Leo XXX 10.5.6. Same symptom... Thanks Scott! 1/19/09 8:10:02 PM [0x0-0x23023].com.apple.systempreferences[263] TabletMagicDaemon v2.0b15 1/19/09 8:10:02 PM [0x0-0x23023].com.apple.systempreferences[263] (c) 2001-2008 Thinkyhead Software <[url="http://www.thinkyhead.com"]www.thinkyhead.com[/url]> 1/19/09 8:10:02 PM [0x0-0x23023].com.apple.systempreferences[263] [INIT] renice -20 268 : Succeeded 1/19/09 8:10:02 PM [0x0-0x23023].com.apple.systempreferences[263] [INIT] Machine Type: MacBookAir1,1 1/19/09 8:10:03 PM System Preferences[263] Received [hello] 1/19/09 8:10:03 PM System Preferences[263] Received [port] serial0 1/19/09 8:10:03 PM System Preferences[263] Received [none] 1/19/09 8:10:03 PM System Preferences[263] Received [none] 1/19/09 8:10:02 PM [0x0-0x23023].com.apple.systempreferences[263] [PROC] Tablet Bounds: (0, 0) - (15239, 15239) 1/19/09 8:10:02 PM [0x0-0x23023].com.apple.systempreferences[263] [PROC] Screen Bounds: (0, 0) - (1599, 1199) 1/19/09 8:10:02 PM [0x0-0x23023].com.apple.systempreferences[263] [PORT] serial0: OPENED 1/19/09 8:10:02 PM [0x0-0x23023].com.apple.systempreferences[263] [PORT] Setting speed to 9600 1/19/09 8:10:02 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "SP\r" 1/19/09 8:10:02 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "~#\r" 1/19/09 8:10:03 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "~#\r" 1/19/09 8:10:03 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "~#\r" 1/19/09 8:10:03 PM [0x0-0x23023].com.apple.systempreferences[263] [PORT] Setting speed to 19200 1/19/09 8:10:03 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "SP\r" 1/19/09 8:10:03 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "~#\r" 1/19/09 8:10:03 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "~#\r" 1/19/09 8:10:03 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "~#\r" 1/19/09 8:10:03 PM [0x0-0x23023].com.apple.systempreferences[263] Could not initialize tablet. 1/19/09 8:10:29 PM System Preferences[263] Received [none] 1/19/09 8:10:29 PM System Preferences[263] Received [none] 1/19/09 8:10:28 PM [0x0-0x23023].com.apple.systempreferences[263] [PORT] serial0: OPENED 1/19/09 8:10:28 PM [0x0-0x23023].com.apple.systempreferences[263] [PORT] Setting speed to 9600 1/19/09 8:10:28 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "SP\r" 1/19/09 8:10:28 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "~#\r" 1/19/09 8:10:29 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "~#\r" 1/19/09 8:10:29 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "~#\r" 1/19/09 8:10:29 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "~#\r" 1/19/09 8:10:29 PM [0x0-0x23023].com.apple.systempreferences[263] [PORT] Setting speed to 19200 1/19/09 8:10:29 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "SP\r" 1/19/09 8:10:29 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "~#\r" 1/19/09 8:10:29 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "~#\r" 1/19/09 8:10:29 PM [0x0-0x23023].com.apple.systempreferences[263] [SENT] "~#\r" 1/19/09 8:10:29 PM [0x0-0x23023].com.apple.systempreferences[263] Could not initialize tablet. ioreg.txt Link to comment Share on other sites More sharing options...
Recommended Posts