laz954 Posted May 23, 2007 Share Posted May 23, 2007 I tried the procedure and was only able to get the Dual Core feature operational. I'm fairly new so excuse my Ignorance, I do have one system running Intel MB generic 945MB, but I can't get my Dell D620 Core Duo to work. 10.4.8 Build SSE2/SSE3 Intel/AMD Was able to upgrade to 10.4.9 using Video works well Audio Sigamatel 9200 Not working (Don't know Vendor Code/Dev ID Wireless Intel/Pro 3945ABG Not working Dev ID x4222/x4227 Vendor Code x8086 Ethernet Broadcom 57xx not working either Grayed out Vendor ID x14e4/Device ID 1600 Again please excuse my ignorance, I'm a beginner, willing to learn. Thanks, Laz Link to comment Share on other sites More sharing options...
meshkashatu Posted May 25, 2007 Share Posted May 25, 2007 I'm new too 1)sigmatel also doesn't work for me when I drag the sigmatel txt file into the applehdapatcher mac goin crash. 2)Mouse cursor is disappearing, only when I magnify with ctrl and scroll , I can see it 3)I cannot set screen resolution,I followed your guide... Nonw i'm downloading natit.. I hope something will change.. any help????? Link to comment Share on other sites More sharing options...
KingTKS Posted May 28, 2007 Share Posted May 28, 2007 I'm new too 1)sigmatel also doesn't work for me when I drag the sigmatel txt file into the applehdapatcher mac goin crash. 2)Mouse cursor is disappearing, only when I magnify with ctrl and scroll , I can see it 3)I cannot set screen resolution,I followed your guide... Nonw i'm downloading natit.. I hope something will change.. any help????? well my guide is incorrect in the video card part just follow the instructions on this site http://wiki.osx86project.org/wiki/index.php/Titan I have been messing around with dual view and no luck so far. after following the forums here http://forum.insanelymac.com/index.php?sho...=35422&st=0 still nothing i was wondering if you did it seadonkey? and how? do you have a guide you could write out for me? Link to comment Share on other sites More sharing options...
KingTKS Posted May 28, 2007 Share Posted May 28, 2007 has anyone had success or failure with firewire on final cut pro? anyone have success with s-video out? Link to comment Share on other sites More sharing options...
GetoChKn Posted May 29, 2007 Share Posted May 29, 2007 I had svideo working no problem. Just plugged in my TV and it popped up on there one day. Just no VGA out. Never tried firewire yet on anything. Link to comment Share on other sites More sharing options...
eroc Posted May 30, 2007 Share Posted May 30, 2007 my m1210 can not use the wireless can anyone help me? thk Link to comment Share on other sites More sharing options...
KingTKS Posted May 31, 2007 Share Posted May 31, 2007 you have to have a dell 1390 or 1490 wireless card installed. not the 3945 that commonly comes with this laptop Link to comment Share on other sites More sharing options...
JorgeJones Posted May 31, 2007 Share Posted May 31, 2007 has anyone had success or failure with firewire on final cut pro?anyone have success with s-video out? I have successfully captured video through firewire using FCP 4.5HD. It's PPC code, so the program runs slower, but it detects the deck just fine. I think you might just be using a messed up copy of FCP. Any word on Extended display yet? Link to comment Share on other sites More sharing options...
eroc Posted June 1, 2007 Share Posted June 1, 2007 why my speaker can not work ??? thank all of you Link to comment Share on other sites More sharing options...
yare Posted June 6, 2007 Share Posted June 6, 2007 Anybody gives a link to that mifiki kernel make speaker out, I don't need a whole SSE3 intel only DVD Link to comment Share on other sites More sharing options...
KingTKS Posted June 13, 2007 Share Posted June 13, 2007 so does s-video out work on natit and not titan? Link to comment Share on other sites More sharing options...
rss Posted June 15, 2007 Share Posted June 15, 2007 Hi, I'm new to the Mac, so please let me know is this has been answered previously. I have a M1210 with Ubuntu. I followed SeaDonkey's guide: 1. I resized my Ubuntu partition using the Ubuntu 7.04 Live CD to create about 25 GB of free space after the Linux partition. I made a Primary FAT32 partition out of this entire free space. 2. I am using the JaS 10.4.8 AMD Intel SSE2 SSE3 DVD. I went to the Disk Utility and tried to erase the new FAT32 partition and set it to Mac OS Extended (Journaled). No error or warning messages were returned. This step does not work. If I reselect the partition on the left pane of the Disk Utility, it is still "MS-DOS File System". And it does not show up on the Installer Destination list. What am I doing wrong ? Should I be using a different DVD ? Thanks for your help, rss Link to comment Share on other sites More sharing options...
ac3_intel Posted June 15, 2007 Share Posted June 15, 2007 :) :thumbsup_anim: de PELOS!!!!!! me resultó muy bien en mi broadcom 440x gracias Link to comment Share on other sites More sharing options...
rss Posted June 15, 2007 Share Posted June 15, 2007 Hi, I'm new to the Mac, so please let me know is this has been answered previously. I have a M1210 with Ubuntu. I followed SeaDonkey's guide: 1. I resized my Ubuntu partition using the Ubuntu 7.04 Live CD to create about 25 GB of free space after the Linux partition. I made a Primary FAT32 partition out of this entire free space. 2. I am using the JaS 10.4.8 AMD Intel SSE2 SSE3 DVD. I went to the Disk Utility and tried to erase the new FAT32 partition and set it to Mac OS Extended (Journaled). No error or warning messages were returned. This step does not work. If I reselect the partition on the left pane of the Disk Utility, it is still "MS-DOS File System". And it does not show up on the Installer Destination list. What am I doing wrong ? Should I be using a different DVD ? Thanks for your help, rss Ok, I think I fixed this by booting into the Ubuntu 7.04 partition (that is my first partition on the HD), running cfdisk as root, selecting the newly created FAT32 partition and changing it's type to 'AF'. Once I did this, the OSX installer correctly detected the new partition as 'Mac OS Extended (Journaled)' and everything proceeded correctly. Yay! I also added the dual-boot code for Darwin, as described in the guide. But now I have another problem: Once everything is installed, and I reboot, it always boots into Ubuntu! The only way I can get it to boot to OSX is through username_taken's method: have the install DVD in the drive and wait out the timeout. Current partitioning: Disk 0 Partition 1: Primary linux ext3 for Ubuntu 26.37 GB Partition 2: Primary HFS+ for OSX 25.85 GB (set as boot) Partition 3: Extended linux-swap 2.27 GB Can someone suggest something to try ? Thanks! -rss Link to comment Share on other sites More sharing options...
KingTKS Posted June 20, 2007 Share Posted June 20, 2007 try running the disk utility in ubuntu and change the boot flag to your mac partition Link to comment Share on other sites More sharing options...
burn420 Posted June 22, 2007 Share Posted June 22, 2007 why my speaker can not work ??? thank all of you If you have RAM with 667 you have to do this out of the original install instructions... For 667mhz ram ONLY! Do not do this next step if you have 533MHZ ram: Add the following to your com.apple.Boot.plist file in your kernel flags: fsb=166 (this will also fix your timing and choppy audio) My audio was choppy before I did this... Link to comment Share on other sites More sharing options...
Freakin Posted July 7, 2007 Share Posted July 7, 2007 Thanks everyone for the hard work! I finally got my m1210 dual booting XP Pro & OSX. This guide gave me nothing but problems until I actually found the right ISO (not surprising). The only thing I'm having a problem with is the Broadcom Ethernet. At this point I think my IONetworking.kext is so screwed up that I don't think any of these standard installs will work for me. Can someone send me their .kext from their working m1210 install and tell me which commands I need to do to unload the old one and reinstall the new one? It pops up every time I restart telling me my AppleBroadcom440 kext is messed up and cannot be loaded. I followed one fix for it that used an older IONetwork kext from 10.4.4 but that only worked through one reboot (however that works, I'm not sure). Link to comment Share on other sites More sharing options...
alfdog Posted July 12, 2007 Share Posted July 12, 2007 has anyone been brave enough to try installing 10.4.10 on their m1210? Link to comment Share on other sites More sharing options...
nexvision Posted July 12, 2007 Share Posted July 12, 2007 I am running 10.4.10 on my 1210 and the only thing's I do not have working are the SD slot and the camera. the rest is perfect. Link to comment Share on other sites More sharing options...
gnuyen Posted July 13, 2007 Share Posted July 13, 2007 is sleep working yet? I have 10.4.8 installed, but even though I have disabled sleep, eventually the screen turns off and the machine locks up Link to comment Share on other sites More sharing options...
nexvision Posted July 14, 2007 Share Posted July 14, 2007 is sleep working yet? I have 10.4.8 installed, but even though I have disabled sleep, eventually the screen turns off and the machine locks up To be honest with you I have never been a fan of sleep so I have it disabled so that may not be working as well. Link to comment Share on other sites More sharing options...
gnuyen Posted July 14, 2007 Share Posted July 14, 2007 I just uninstalled the power bundle that's at the beginning of this thread and disabled it there. I don't get battery life updates, but it doesn't lock up anymore. I do however have SLOWW network connections through ethernet. It's kind of intermittent. I see a lot of other people post about it here, but I don't really see any solutions or responses. I'm guessing most of you use the wifi card so it's not an issue? Mine is in the mail so I've been using ethernet, and it sucks. Any suggestions? Link to comment Share on other sites More sharing options...
Ubertastic Posted July 21, 2007 Share Posted July 21, 2007 Does anyone know why I might be getting a black screen when I insert the DVD to install? I see a grey apple screen, followed by complete black. During this time, my CD/DVD drive is working. Then, the drive stops leaving me with a black screen. I'm using JaS 10.4.8 SSE3 Intel Only DVD. M1210 1 Gigabyte RAM 1.66 GHz Processor (Intel Centrino Duo) Intel 950 GMA (Integrated) Any ideas? Link to comment Share on other sites More sharing options...
nexvision Posted August 3, 2007 Share Posted August 3, 2007 Does anyone know why I might be getting a black screen when I insert the DVD to install? I see a grey apple screen, followed by complete black. During this time, my CD/DVD drive is working. Then, the drive stops leaving me with a black screen. I'm using JaS 10.4.8 SSE3 Intel Only DVD. M1210 1 Gigabyte RAM 1.66 GHz Processor (Intel Centrino Duo) Intel 950 GMA (Integrated) Any ideas? Did u make sure to disable your second core in the bios before installing?? Link to comment Share on other sites More sharing options...
hyphyleo Posted August 7, 2007 Share Posted August 7, 2007 I can't get the thing to wake up from sleep. Is there a fix for this? Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts