xaaaaaaaaaaaaaa Posted December 14, 2008 Share Posted December 14, 2008 Hi, here is a .pkg of the last version of the kext posted here... Hope it helps some one.. Thanks to DaemonES and MadInt (again!) Attansic L1 Ethernet Thanks a lot!!!!! Link to comment Share on other sites More sharing options...
DeeJayR Posted December 15, 2008 Share Posted December 15, 2008 hi.. my attansic l1 on p5kc works but is very slow in download mac OS firewall is disabled and router is ok. how can i do? Link to comment Share on other sites More sharing options...
serraz Posted December 16, 2008 Share Posted December 16, 2008 hey all i installed the pkg on my asus p5q pro added all the device id into the info.plist and stuff like that but on boot it says ERROR: mac address from SPI is invalid. i was thinking mabe if there was a way to add the Mac addres sinto the info.plist would this fix the issue. Link to comment Share on other sites More sharing options...
howoarang Posted December 16, 2008 Share Posted December 16, 2008 hey all i installed the pkg on my asus p5q pro added all the device id into the info.plist and stuff like that but on boot it says ERROR: mac address from SPI is invalid. i was thinking mabe if there was a way to add the Mac addres sinto the info.plist would this fix the issue. Write the VENDOR ID of your Ethernet card. I have P5Q with Attansic L1 Ethernet ID 1026x1969 and have same problem. Correct driver for my ethernet does not exists for Mac OSX !!! Link to comment Share on other sites More sharing options...
serraz Posted December 17, 2008 Share Posted December 17, 2008 1969x1026 thats the dev ids man i don think one exsts Link to comment Share on other sites More sharing options...
Jimmy Mallmann Posted December 17, 2008 Share Posted December 17, 2008 Hi, Here is a 10.5.6 version of the Attansic L1 Ethernet Kext, fixed some dependencies, therefore it works with the vanilla IONetworkingFamily.kext This pkg includes a simple script for bringing back the Attansic L1 NIC after sleep: Type " attansic " in the terminal Huge thanks to DaemonES & MadInt AttansicL1Ethernet_10.5.6.zip Link to comment Share on other sites More sharing options...
howoarang Posted December 18, 2008 Share Posted December 18, 2008 1969x1026 thats the dev ids man i don think one exsts So, I thing, you need buy a other ethernet card, because driver (kext) for your ethernet with ID 1969x1026 does not exist. I have bought PCI ethernet Realtek 8139 a working perfect. Link to comment Share on other sites More sharing options...
marionez Posted December 18, 2008 Share Posted December 18, 2008 I've got an old 3com eth card that works perfectly, but it could be even good having that onboard lan kext working. I definetely don't know how is possible porting driver from a freeBSD or linux kernel module, but that module ATL1E does exist in freebsd and linux kernel, so the source is available, I posted it in another thread, maybe someone could help me telling me the way to do it. For example, how can I have the ATL1 kext source maybe editing it, with ATL1E source can reach something working... Link to comment Share on other sites More sharing options...
Wppley Posted December 19, 2008 Share Posted December 19, 2008 Hi all! I have a P5GC-MX 1333 and my onboard ethernet is Attansic L2. Anybody have this? I have a Realtek 8139 too, but after update 10.5.6 she‘s not too friendly...lol. Link to comment Share on other sites More sharing options...
serraz Posted December 20, 2008 Share Posted December 20, 2008 So, I thing, you need buy a other ethernet card, because driver (kext) for your ethernet with ID 1969x1026 does not exist.I have bought PCI ethernet Realtek 8139 a working perfect. Yes but the shops around here dont have any nics that work with mac osx so therea another issue :S Link to comment Share on other sites More sharing options...
magnums Posted December 20, 2008 Share Posted December 20, 2008 I got Acer Aspire 6920G notebook with Atheros Attansic ethernet card: code from lcpi.txt: 02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit Ethernet Adapter [1969:1026] (rev b0) maybe someone got solution to get this Asus motherboard driver to work on never versions? Link to comment Share on other sites More sharing options...
marionez Posted December 21, 2008 Share Posted December 21, 2008 02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit Ethernet Adapter [1969:1026] (rev b0) maybe someone got solution to get this Asus motherboard driver to work on never versions? There is no kext for that device and nobody wants do develope a kext driver for that 1969:1026 I've got too... Link to comment Share on other sites More sharing options...
magnums Posted December 21, 2008 Share Posted December 21, 2008 I found this link for FreeBSD version. Mac OS anyway based on it, so maybe some dev could port it to Darwin? Eee ethernet card based on Atl1e, needed for us http://wiki.freebsd.org/AsusEee Link to comment Share on other sites More sharing options...
chaka123 Posted December 21, 2008 Share Posted December 21, 2008 hi guys, got an attansic l1 with id 1026 too. is there any hope, that somebody develope a kext for that. i got an acer aspire 6930g and my intel wifi 5100 is also unsupported so i got no internet on the notebook. Link to comment Share on other sites More sharing options...
Hamm Posted December 22, 2008 Share Posted December 22, 2008 try booting in safe mode (-x) or boot with verbose(-v) and tell us the error that you see I have done installation procedure all over again whit different kernel, whit or without sound/graphic kext... same error after restarting... you need to restart your computer. hold down the power button for several second or press restart button It looks like there is a problem whit my network card I will try to disable my network card in BIOS and try to install OS again. -v hmmm..if I disable my network card in bios...can I instal kext for that card after instaling ideneb? hm...fubar Link to comment Share on other sites More sharing options...
Evgeniy Posted December 24, 2008 Share Posted December 24, 2008 dont work on 10.5.6 id 1969 1048 MB Asus P5B-E Link to comment Share on other sites More sharing options...
Evgeniy Posted December 25, 2008 Share Posted December 25, 2008 Anybody can help me found kext for Lan Asus P5B-E??? Link to comment Share on other sites More sharing options...
Simalek Posted December 27, 2008 Share Posted December 27, 2008 ну что, адаптер вообще не пашет или что ? у меня p5k se i dont understand , does this adapter work in iDeneb 10.5.5 , my motherboard is p5k se Link to comment Share on other sites More sharing options...
marionez Posted December 27, 2008 Share Posted December 27, 2008 ну что, адаптер вообще не пашет или что ? у меня p5k sei dont understand , does this adapter work in iDeneb 10.5.5 , my motherboard is p5k se You have a ATL1E [1969:1026] that is not the same device of this thread, and there is no kext for 1969:1026 device. Check your Attansic device ID with DPCIManager. Link to comment Share on other sites More sharing options...
Simalek Posted December 27, 2008 Share Posted December 27, 2008 yes, you are right, i have atl1e, i checked ))) Link to comment Share on other sites More sharing options...
Evgeniy Posted December 27, 2008 Share Posted December 27, 2008 i install kext to retail version 10.5.4 id lan PCI\VEN_1969&DEV_1048&SUBSYS_82261043&REV_B0\4&935E26E&0&00E3 kext for Atlantic nice work on iDeneb, but on retail version Mac OSX 10.5.4 istalled with help boot 132 , my lan cards RTL 8139 and Atlantiс doest work status "not plug in cabel" how i can resolve it ? Link to comment Share on other sites More sharing options...
Oletros Posted December 27, 2008 Share Posted December 27, 2008 I have a problem with mi Asus P5K SE/EPU I can't set MTU greater than 1550 and in Windows I can write at 25 MB/s in the NAS but in Leopard I can only write at 5 MB/s Any advise? Link to comment Share on other sites More sharing options...
Jimmy Mallmann Posted December 28, 2008 Share Posted December 28, 2008 This happens because IONetworking is incompatible... If you update to 10.5.6, you will have no problems with the installer I have posted (my signature) Or, you could edit the Info.plist for both kexts, to match your system... i install kext to retail version 10.5.4 id lan PCI\VEN_1969&DEV_1048&SUBSYS_82261043&REV_B0\4&935E26E&0&00E3 kext for Atlantic nice work on iDeneb, but on retail version Mac OSX 10.5.4 istalled with help boot 132 , my lan cards RTL 8139 and Atlantiс doest work status "not plug in cabel" how i can resolve it ? Link to comment Share on other sites More sharing options...
Evgeniy Posted December 28, 2008 Share Posted December 28, 2008 Both lan card have status DISABLE. Why its happen ? Link to comment Share on other sites More sharing options...
Jimmy Mallmann Posted December 29, 2008 Share Posted December 29, 2008 Try keeping only onte nic... Both lan card have status DISABLE. Why its happen ? Link to comment Share on other sites More sharing options...
Recommended Posts