PPCnostalgic Posted October 4 Share Posted October 4 Well, I'm just making USB drive to try your boot-args... 1 Link to comment Share on other sites More sharing options...
PPCnostalgic Posted October 4 Share Posted October 4 I guess I'm missing something. Can you explain how did you reolace these fields revpatch=cpuname,sbvmm,diskread,pci ? 1 Link to comment Share on other sites More sharing options...
Max.1974 Posted October 4 Share Posted October 4 Sure @PPCnostalgic here on Nvram in Opencore plist Here my Nvram parcial config.plist Hope this help you Nvram OC fix revpatch.plist.zip Link to comment Share on other sites More sharing options...
PPCnostalgic Posted October 4 Share Posted October 4 With your modified plist something's changed, it says this Mac has 3 Ram slot instead of 12, on 4 of them is installed a 16gb module, but still non the right way... The machine works normally though. Thank you for your time! 1 Link to comment Share on other sites More sharing options...
bluenote56 Posted October 4 Share Posted October 4 2 hours ago, eSaF said: This here is a bare bones EFI Folder to hopefully get you up and running. Clean your NvRAM and try it on a spare USB Drive. Good luck. EFI.zip 9.9 MB · 1 download Thanks I'll do and give feedback 1 1 Link to comment Share on other sites More sharing options...
jlrycm Posted October 4 Share Posted October 4 4 hours ago, PPCnostalgic said: You did a very good job, I'm on OpenCore and I have to find a way to replcate what you did with Clover. Thank you for your hint, I'll try to do something similar with OpenCore.. @PPCnostalgic I worked on replicating the OpenCore memory configuration fix for macpro 7,1 to Clover and I was able to do it and boot from Clover w/o issues using restrictedevents pci boot arg but the memory slot diagram will not look like a real MacPro 7,1, instead will look like a hackintosh MacPro 7,1. Link to comment Share on other sites More sharing options...
PPCnostalgic Posted October 5 Share Posted October 5 Thank you @Max.1974 and @jlrycm for your time. I managed it to work correctly re-installing RestrictEvents.kext for some reason OpenCore didn't update from 1.1.3 to newer 1.1.4 Now Both Cpu type and Ram slots are listed properly. 2 Link to comment Share on other sites More sharing options...
Alpha22 Posted October 5 Share Posted October 5 2 Link to comment Share on other sites More sharing options...
bluenote56 Posted October 7 Share Posted October 7 On 10/4/2024 at 5:48 PM, eSaF said: This here is a bare bones EFI Folder to hopefully get you up and running. Clean your NvRAM and try it on a spare USB Drive. Good luck. EFI.zip 9.9 MB · 20 downloads Well, after two days of attempts, this is a brief report which I hope can be useful not only for me but also for those with a similar build. 1 There’s no way to make Sequoia boot if I don’t have “amfi_get_of_my_way=1” in nvram 2 In Sonoma WhatsApp and Skype work only if I I don’t have “amfi_get_of_my_way=1” in nvram Otherwise they don’t. 3 I could successfully allow in Privacy and Security settings Skype and Word to use Microphone and Camera after booting Sonoma as per point 2 4 I made a brand new Sequoia ssd to verify if the issues were relating to my main Sequoia build. Same issues both without OCLP and after applying it. 5 I tried your EFI but it didn’t work. I’m going to try with step by step changes and see what happens. Anyway after trying the USB with that EFI (and resetting NVRAM twice) it messed up the OCLP patches (minor problem). I reapplied. 6 I don’t know why but it randomly takes ages to show a 2 TB/ hd I use to archive music. This never happened with Monterey 7 Resetting nvram it’s mandatory as you rightly said. 8 Prime video App never works but in browser for reproduction error (who cares after all) So in a nutshell I have the Sonoma build working with Skype (which I use for remote teaching and online working meetings) with point 2 option and a Sequoia build which is almost useless for me if I don’t fix the problem. Hackintosh is a passion (everyone here knows it well), that’s why I get mad trying to understand when and where I make mistakes. I can work and enjoy music anyway but you know, “if at first you don't succeed” it’s an understatement here. Thanks for your help. P.s. (off topic) Since I can’t get you a beer while listening to good music, I can send some Italian cooking recipes wherever it can be posted. I’m not very good in hacking but no one has ever complained about my cooking 😄 1 Link to comment Share on other sites More sharing options...
eSaF Posted October 7 Share Posted October 7 1 hour ago, bluenote56 said: Since I can’t get you a beer while listening to good music, I can send some Italian cooking recipes wherever it can be posted. I’m not very good in hacking but no one has ever complained about my cooking 😄 Hi, I did say the EFI I posted for you was vanilla where you would have to construct further for your own preferences by adding or deleting. On another note, I don't doubt in the slightest about your cooking skills which I am sure by the sound of it, is more proficient and tastier than your Hack skills. Don't give up, you'll get there in the end. GitHub - https://github.com/topics/hackintosh?o=desc&s=updated - has some examples of your machine specs with working EFI Folders that you can try to see if it can better your situation. Good luck. 1 Link to comment Share on other sites More sharing options...
XanthraX Posted October 7 Share Posted October 7 Nobody noticed the release of Sequoia 15.01? The update worked flawlessly on my rig. Link to comment Share on other sites More sharing options...
eSaF Posted October 7 Share Posted October 7 2 hours ago, XanthraX said: Nobody noticed the release of Sequoia 15.01? The update worked flawlessly on my rig. Apart from 15.1 Beta (24B5055e) and this one is Public, what is the big difference? I have it on a USB Drive but yet to install it as I am running 15.1 Beta (24B5055e) at the moment. 1 Link to comment Share on other sites More sharing options...
LockDown Posted October 8 Share Posted October 8 (edited) Im currently running 15.0. Anybody encountered this error while 15.0.1 (774.8MB )is being downloaded? FIXED!!! Temporarily disabling BlueToolFixup. Edited October 8 by LockDown 1 Link to comment Share on other sites More sharing options...
deeveedee Posted October 8 Share Posted October 8 (edited) 13 hours ago, LockDown said: FIXED!!! Temporarily disabling BlueToolFixup. This appears to be common in the hackintosh community. I'm not sure if it affects all hack/Mac users the same, but like you, incremental OTA on my HackMini8,1 only works when BluetoolFixup.kext is disabled. Again, thanks to @ird for enlightening me. Edited October 8 by deeveedee 3 Link to comment Share on other sites More sharing options...
Anto65 Posted October 8 Share Posted October 8 Same thing here as at @LockDown I get incremental updates (doing OCLP revert , I haven't actually applied it lately 🙂 ) but it fails By disabling BluetoolFixup.kext, everything goes as it should 🤷♂️ ( 15.1 Beta 6 ) 7 Link to comment Share on other sites More sharing options...
anullpointerexception Posted October 10 Share Posted October 10 (edited) Good evening, I'm not sure if this is the correct thread for my issue, so I apologize if it's not. I successfully updated my second Hackintosh to macOS Sequoia, and everything is working perfectly except for one issue: Bluetooth. I’ve updated all my kexts to the latest versions, but for some reason, I can't activate Bluetooth. Under macOS Sonoma, I used earlier versions of the same kexts without any issues, but on Sequoia, Bluetooth just won't turn on. If I enable it, the toggle stays on for a few seconds and then switches to "Disabled" again. This is what log show --last boot | grep -i brcm shows: 2024-10-10 20:41:38.313039+0200 0x3d2 Default 0x0 120 0 kernelmanagerd: Received kext load notification: as.lvs1974.AirportBrcmFixup 2024-10-10 20:41:38.313131+0200 0x892 Error 0x0 309 0 kernelmanager_helper: Could not process load notification in helper: Could not find: Did not find identifier (as.lvs1974.AirportBrcmFixup) in helper to process load notification 2024-10-10 20:41:38.313537+0200 0x3d2 Default 0x0 120 0 kernelmanagerd: Received kext load notification: as.acidanthera.BrcmFirmwareStore 2024-10-10 20:41:38.313626+0200 0x892 Error 0x0 309 0 kernelmanager_helper: Could not process load notification in helper: Could not find: Did not find identifier (as.acidanthera.BrcmFirmwareStore) in helper to process load notification 2024-10-10 20:41:38.315757+0200 0x3d2 Default 0x0 120 0 kernelmanagerd: Received kext load notification: com.apple.driver.AirPort.BrcmNIC 2024-10-10 20:41:38.315828+0200 0x3d2 Default 0x0 120 0 kernelmanagerd: Received kext load notification: as.acidanthera.BrcmPatchRAM3 2024-10-10 20:41:38.315914+0200 0x892 Error 0x0 309 0 kernelmanager_helper: Could not process load notification in helper: Could not find: Did not find identifier (as.acidanthera.BrcmPatchRAM3) in helper to process load notification I did add the following kexts for Bluetooth: bluetoothExternalDongleFailed and bluetoothInternalControllerInfo is also set. Port Mapping is also done: IOReg: Any insights or suggestions would be greatly appreciated! Thanks in advance Edited October 10 by anullpointerexception Link to comment Share on other sites More sharing options...
chris1111 Posted October 10 Share Posted October 10 53 minutes ago, anullpointerexception said: Good evening, I'm not sure if this is the correct thread for my issue, so I apologize if it's not. I successfully updated my second Hackintosh to macOS Sequoia, and everything is working perfectly except for one issue: Bluetooth. I’ve updated all my kexts to the latest versions, but for some reason, I can't activate Bluetooth. Under macOS Sonoma, I used earlier versions of the same kexts without any issues, but on Sequoia, Bluetooth just won't turn on. If I enable it, the toggle stays on for a few seconds and then switches to "Disabled" again. This is what log show --last boot | grep -i brcm shows: 2024-10-10 20:41:38.313039+0200 0x3d2 Default 0x0 120 0 kernelmanagerd: Received kext load notification: as.lvs1974.AirportBrcmFixup 2024-10-10 20:41:38.313131+0200 0x892 Error 0x0 309 0 kernelmanager_helper: Could not process load notification in helper: Could not find: Did not find identifier (as.lvs1974.AirportBrcmFixup) in helper to process load notification 2024-10-10 20:41:38.313537+0200 0x3d2 Default 0x0 120 0 kernelmanagerd: Received kext load notification: as.acidanthera.BrcmFirmwareStore 2024-10-10 20:41:38.313626+0200 0x892 Error 0x0 309 0 kernelmanager_helper: Could not process load notification in helper: Could not find: Did not find identifier (as.acidanthera.BrcmFirmwareStore) in helper to process load notification 2024-10-10 20:41:38.315757+0200 0x3d2 Default 0x0 120 0 kernelmanagerd: Received kext load notification: com.apple.driver.AirPort.BrcmNIC 2024-10-10 20:41:38.315828+0200 0x3d2 Default 0x0 120 0 kernelmanagerd: Received kext load notification: as.acidanthera.BrcmPatchRAM3 2024-10-10 20:41:38.315914+0200 0x892 Error 0x0 309 0 kernelmanager_helper: Could not process load notification in helper: Could not find: Did not find identifier (as.acidanthera.BrcmPatchRAM3) in helper to process load notification I did add the following kexts for Bluetooth: bluetoothExternalDongleFailed and bluetoothInternalControllerInfo is also set. Port Mapping is also done: IOReg: Any insights or suggestions would be greatly appreciated! Thanks in advance If you use a dongle USB Bluetooth you need only BlueToolFixup.kext disable other bluetooth kext 6 Link to comment Share on other sites More sharing options...
anullpointerexception Posted October 11 Share Posted October 11 (edited) 10 hours ago, chris1111 said: If you use a dongle USB Bluetooth you need only BlueToolFixup.kext disable other bluetooth kext I am using a Dell DW1830 NGFF WiFi-Card installed in the Wi-Fi slot on my Motherboard. I don‘t know why its not working, I did install Sonoma yesterday on a spare SSD for testing purposes and Bluetooth and WiFi are working perfectly fine under Sonoma. Edited October 11 by anullpointerexception Link to comment Share on other sites More sharing options...
eSaF Posted October 11 Share Posted October 11 13 minutes ago, anullpointerexception said: I am using a Dell DW1830 NGFF WiFi-Card installed in the Wi-Fi slot on my Motherboard. I don‘t know why its not working, I did install Sonoma yesterday on a spare SSD for testing purposes and Bluetooth and WiFi is working perfectly fine under Sonoma. It is strange that it is working under Sonoma but not Sequoia. Maybe for some reason the slot is not powered in Sequoia. In Hackintool, you should be able to see if it is or not. Link to comment Share on other sites More sharing options...
Max.1974 Posted October 11 Share Posted October 11 (edited) Are you using Dual Boot with Windows ? Maybe firmware injection incompatíble with macOS. Are try reset nvram? Maybe you should try this command sudo pkill bluetoothd And check AirPort kexts if you really need all this 3 versions. I saw your usb internal ports. Its seems you not need all of them mapping internal. Check your plist XHCI Port limit is enable and try extract with Hackintool kext under usbmap and them replace it with usbports and SSDTs. Add device fake ID properties too with compatible for your DW1830. Use device native number id Need use too acpi wake your devices xhci I think you need check here. Broadcom fix Edited October 11 by Max.1974 Link to comment Share on other sites More sharing options...
XanthraX Posted October 11 Share Posted October 11 It worked normal for me, but not incremental. Had to download about 14G. Not disabled any kext. 1 Link to comment Share on other sites More sharing options...
deeveedee Posted October 11 Share Posted October 11 On my HackMini8,1 booting Sequoia 15.1 Beta with OC 1.0.2, Microsoft Remote Desktop (now "Windows App") still has connectivity issues over Ethernet that can be resolved by setting Ethernet to "Inactive" and then back to "Active." Sequoia 15.0.1 (Release) does not have this issue. My hack's details are as follows: HP EliteDesk 800 G4 Mini with Radeon RX 560x dGPU (Ethernet: Intel i219LM) Open Core 1.0.2, IntelMausi.kext 1.0.7 SMBIOS macMini8,1 Windows App (MS Remote Desktop) v11.0.5 (2401) Link to comment Share on other sites More sharing options...
deeveedee Posted October 11 Share Posted October 11 (edited) @anullpointerexception Very nice screenshots. Unfortunately, not helpful (for me). I would recommend always posting your EFI when asking for help. Just a guess since there's not enough information to diagnose - depending on the version of BluetoolFixup.kext that you are using, you may need a Beta boot arg (either use -btlfxbeta or -lilubetaall). Do you need a beta boot arg? You can tell if BluetoolFixup.kext is working properly by looking at System Report and confirming that Bluetooth Chipset is reported as "THIRD_PARTY_DONGLE." Again, you'll get a lot better support if you post your EFI. If it's too big to post, post only the OC/config.plist and OC/Kexts. If still too big, post your EFI to external storage and provide a link. Less screen shots, more EFI. EDIT: If you determine that the beta boot-arg fixes your problem, you can upgrade to the latest BluetoolFixup.kext 2.6.9 (available in Acidanthera's BrcmPatchRAM package) which natively supports Sequoia without the beta boot-arg. Edited October 11 by deeveedee 1 Link to comment Share on other sites More sharing options...
chris1111 Posted October 11 Share Posted October 11 6 hours ago, anullpointerexception said: I am using a Dell DW1830 NGFF WiFi-Card installed in the Wi-Fi slot on my Motherboard. I don‘t know why its not working, I did install Sonoma yesterday on a spare SSD for testing purposes and Bluetooth and WiFi are working perfectly fine under Sonoma. OK you have a Mini PCI Did you try a Reset NVRAM from Opencore 1 Link to comment Share on other sites More sharing options...
deeveedee Posted October 11 Share Posted October 11 @chris1111 Forgive me for my laugh emoji on your last post. I thought you were joking. My mistake. 1 Link to comment Share on other sites More sharing options...
Recommended Posts