Max.1974 Posted July 25 Share Posted July 25 33 minutes ago, robi62 said: t I just want to see how is your bluetooh as mine doesnt work very well in air drop etc So I can compare to mine and maybe see what needs to be done Of course are you using Opencore or Clover? Im not use any kexts to active Bluetooth or Wireless. Just put extract device plist with Hackintool on DeviceProperties Tell me please, what boot loader plist you needed Link to comment Share on other sites More sharing options...
HurricaneX Posted July 25 Share Posted July 25 5 hours ago, deeveedee said: Flawless installation of macOS Sequoia Beta 4 on my 2010 HackBookPro6,2. Still not applying OCLP post-install patches for Nvidia graphics, but Sequoia is working incredibly well on this old hack. 🚀 About This Hack Hide contents Pretty cool!!Ur graphic card works OOB without OCLP patched?? 3 Link to comment Share on other sites More sharing options...
SavageAUS Posted July 25 Share Posted July 25 (edited) I know this is off topic but I could use some help. I do plan to install Sequoia on this hack once I get it up and running so maybe not so off topic. EDIT: I am no longer getting the same message as before, now I am getting stuck at AHCI start 514 successfully initialized AHCI controller. System just hangs here. Edited July 25 by SavageAUS 1 Link to comment Share on other sites More sharing options...
robi62 Posted July 25 Share Posted July 25 6 hours ago, Max.1974 said: Of course are you using Opencore or Clover? Im not use any kexts to active Bluetooth or Wireless. Just put extract device plist with Hackintool on DeviceProperties Tell me please, what boot loader plist you needed @Max.1974 I use opencore 1 Link to comment Share on other sites More sharing options...
turko35408 Posted July 25 Share Posted July 25 👍 7 Link to comment Share on other sites More sharing options...
bluenote56 Posted July 25 Share Posted July 25 9 hours ago, chris1111 said: You need setting up Sequoia Developper Update Hi, well it happens with age that you can go gaga including me, but I was sure I had the developer option working. That's because I had used your own utility a "looong" time ago on this ssd when it was even Catalina. I didn' t checked it was still working. With Sequoia it doesn't. I should pay Apple now since the old way to get it (as you well know) doesn't work any more. Or maybe I miss something (see tha gaga thing). Thanks anyway. BTW I use almost everything you develop for us. 1 1 Link to comment Share on other sites More sharing options...
miliuco Posted July 25 Share Posted July 25 Following this post https://www.insanelymac.com/forum/topic/359530-pre-release-macos-sequoia/?do=findComment&comment=2823209 and thanking all the help messages, which have been many, in the end it seems to be a hardware failure. I didn't know what else to look at, First Aid on that SSD was no mistake. I installed Sequoia b4 on it from scratch with a USB installation stick and the installation did not finish, the system rebooted and booted again from the install Sequoia icon. I changed to another SSD, partitioned, installed beta 4 from USB, migrated data and settings from a disk with Ventura and so far everything has been fine. Now to wait for the next beta and check if it updates properly. 5 1 Link to comment Share on other sites More sharing options...
robi62 Posted July 25 Share Posted July 25 (edited) Hi everyone just swapped my intel wifi for a dell dw1560 on my hp 1030 g1but cant seem to make wifi work??? Any help appreciated @Max.1974 you had it working in Sonoma … how did you manage?? Getting frustrated 😢 This is config I use config.plist Edited July 25 by robi62 1 Link to comment Share on other sites More sharing options...
chris1111 Posted July 25 Share Posted July 25 2 hours ago, bluenote56 said: Hi, well it happens with age that you can go gaga including me, but I was sure I had the developer option working. That's because I had used your own utility a "looong" time ago on this ssd when it was even Catalina. I didn' t checked it was still working. With Sequoia it doesn't. I should pay Apple now since the old way to get it (as you well know) doesn't work any more. Or maybe I miss something (see tha gaga thing). Thanks anyway. BTW I use almost everything you develop for us. Hi @bluenote56 No Apple change the rule you only need to be connect on your Apple account, its free for all, then you have all the options 4 Link to comment Share on other sites More sharing options...
eSaF Posted July 25 Share Posted July 25 1 hour ago, miliuco said: I didn't know what else to look at, First Aid on that SSD was no mistake. Bro no worries, it would have been the last thing any one of us would have suspected, otherwise it would have been mentioned in the numerous tips offered. Surprised First Aid didn't pick up on it but then again stranger things have and do happen in this Hack game. Glad you got it sorted and was abled to join the happy gang.( until the next time). I am still head scratching why my iPhone Camera only connects by USB and not wireless as it does in Sonoma. Another bugbear I have is the very latest OCLP 1.6.0 Nightly throws up Unsupported OS whereas the version before is perfect. Ah well, the Devs did announce nothing major will be moving forward until August so I guess I will have to wait and see. 5 Link to comment Share on other sites More sharing options...
deeveedee Posted July 25 Share Posted July 25 (edited) 9 hours ago, HurricaneX said: Pretty cool!!Ur graphic card works OOB without OCLP patched?? It is cool - I agree! 😀 Nvidia Tesla drives the display well enough to use Safari (true so far for all Beta versions of Sequoia), but without full graphics acceleration. Sequoia is the first macOS since I started testing Big Sur on this old hack where macOS and Safari are actually usable without NVidia Tesla drivers. However, full Nvidia Tesla graphics acceleration won't be achieved until OCLP is able to apply Sequoia post-install patches for Nvidia. Edited July 25 by deeveedee 4 Link to comment Share on other sites More sharing options...
mek21 Posted July 25 Share Posted July 25 (edited) Thanks to those who posted the standalone installer for DP4. This release finally booted to the desktop. Incidentally, Sequoia DP4 wifi works ok with Heliport and Itlwm.kext/supported Intel wifi. MacFuse 4.8.0 works with Sequoia DP4 if you have required drivers and need to access NTFS in RW as well as Ext2/Ext4. https://github.com/osxfuse/osxfuse/releases/download/macfuse-4.8.0/macfuse-4.8.0.dmg By the way, before Sonoma arranging drive icons on the desktop stayed where they were put. Since Sonoma there are right-click choices, including "none". However choosing "none" and arranging the icons results in their positions being moved around after a reboot. Does anyone know if there is a config to tell mac os to leave the desktop icons where they are put? Edited July 25 by mek21 2 Link to comment Share on other sites More sharing options...
Max.1974 Posted July 25 Share Posted July 25 6 hours ago, robi62 said: Hi everyone just swapped my intel wifi for a dell dw1560 on my hp 1030 g1but cant seem to make wifi work??? Any help appreciated @Max.1974 you had it working in Sonoma … how did you manage?? Getting frustrated 😢 This is config I use Hi my friend, you need use argument "compatible" with device "14e4,43a0", because your CARD IS 4352 (43b1) and need this patch on your device properties. Test and try run with this update kexts on your EFI, don't forget OC Clean Snapshot or update with Opencore Configurator for Opencore EFI and Clover not need that. Use Proprer Tree. Use this kexts if you needed https://github.com/acidanthera/BrcmPatchRAM/releases/tag/2.6.8 Only this kexts BrcmFirmwareData.kext BrcmPatchRAM3.kext If your Bluetooth not working, try with BlueToolFixup.kext Your config plist ziped with only this arguments add 👇 config.plist.zip 1 Link to comment Share on other sites More sharing options...
Max.1974 Posted July 25 Share Posted July 25 (edited) 13 hours ago, SavageAUS said: Eu sei que isso está fora do assunto, mas eu poderia usar alguma ajuda. Eu pretendo instalar o Sequoia neste hack assim que o colocar em funcionamento, então talvez não tão fora do assunto. EDITAR: Não estou mais recebendo a mesma mensagem de antes, agora estou ficando preso no controlador AHCI inicializado com sucesso no AHCI 514. O sistema simplesmente tranda aqui. @SelvagemAUS I checked your plist and I saw that your key SecureBootModel was set to Default. I thinks is much better try this key with Disabled. I suppose that you has update your Voodoo PS2 kexts, and if you use Synaptic trackpad, and if not works with Disabled, maybe you can change for this of mine Lenovo. But first try only with SecureBootModel Disabled. After that change for my kexts. This kexts is compatible with Sequoia. config with SecureBootModel Disabled (avoid use Default).zip VoodooPS2Controller.kext.zip VoodooSMBus.kext.zip Edited July 25 by Max.1974 1 Link to comment Share on other sites More sharing options...
cankiulascmnfye Posted July 25 Share Posted July 25 Does someone know what to enter, to disable Gatekeeper? Becasue the old command is deprecated: sudo spctl --master-disable Password: This operation is no longer supported. To disable the assessment subsystem, please use configuration profiles. Link to comment Share on other sites More sharing options...
deeveedee Posted July 25 Share Posted July 25 42 minutes ago, Max.1974 said: Hi my friend, you need use argument "compatible" with device "14e4,43a0", because your CARD IS 4352 (43b1) and need this patch on your device properties. My 43b1 works fine with AirportBrcmFixup.kext / OCLP Spoiler I needed to spoof IOName with earlier versions of OCLP, but not any more. Are you sure your "compatible" argument is still required? 1 Link to comment Share on other sites More sharing options...
maly70 Posted July 25 Share Posted July 25 (edited) 14 hours ago, SavageAUS said: I know this is off topic but I could use some help. I do plan to install Sequoia on this hack once I get it up and running so maybe not so off topic. EDIT: I am no longer getting the same message as before, now I am getting stuck at AHCI start 514 successfully initialized AHCI controller. System just hangs here. Hi SavageAUS, from the error "AHCI" u mentioned I see that u have an incompatible kext file.. try to install with basic kext and no third party kext files and I am sure it will work. If you installing Sequoia with AMD try not to include NootRed for installation Edited July 25 by maly70 Link to comment Share on other sites More sharing options...
eSaF Posted July 25 Share Posted July 25 1 hour ago, mek21 said: By the way, before Sonoma arranging drive icons on the desktop stayed where they were put. Since Sonoma there are right-click choices, including "none". However choosing "none" and arranging the icons results in their positions being moved around after a reboot. Does anyone know if there is a config to tell mac os to leave the desktop icons where they are put? This is my setting for my Desk Top Icons. They all stay exactly in the same place as I set them on every reboot. Spoiler 3 Link to comment Share on other sites More sharing options...
maly70 Posted July 25 Share Posted July 25 1 minute ago, eSaF said: This is my setting for my Desk Top Icons. They all stay exactly in the same place as I set them on every reboot. Reveal hidden contents Nice Work mate 👍 2 Link to comment Share on other sites More sharing options...
deeveedee Posted July 25 Share Posted July 25 (edited) 45 minutes ago, cankiulascmnfye said: Does someone know what to enter, to disable Gatekeeper? Becasue the old command is deprecated: sudo spctl --master-disable Password: This operation is no longer supported. To disable the assessment subsystem, please use configuration profiles. EDIT: I thought @ameenjuz found a solution? Not sure. Edited July 25 by deeveedee Link to comment Share on other sites More sharing options...
eSaF Posted July 25 Share Posted July 25 31 minutes ago, deeveedee said: EDIT: I thought @ameenjuz found a solution? Not sure. How about this old app, doesn't it work any more? Gatekeeper- App extends security choice in macOS.zip 1 Link to comment Share on other sites More sharing options...
miliuco Posted July 25 Share Posted July 25 @cankiulascmnfye and others To disable gatekeeper now you must use profiles (mobileconfig files). @dhinakg has a profile to do this. It's a little file to be installed in: System Settings >> General >> Devices management >> + (Add). Original profile is unsigned although it works fine. It's easy to sign it by yourself with the app Hancock. Select a valid certificate (Apple Development account is valid) and the profile and get a new profile with -signed suffix in the name. Disable.Gatekeeper.mobileconfig.zip 3 3 Link to comment Share on other sites More sharing options...
Max.1974 Posted July 25 Share Posted July 25 1 hour ago, deeveedee said: My 43b1 works fine with AirportBrcmFixup.kext / OCLP Hide contents I needed to spoof IOName with earlier versions of OCLP, but not any more. Are you sure your "compatible" argument is still required? Nope, because im not use this card anymore, I had used a long time ago and I had need used this arg, just try help guy 😁 Link to comment Share on other sites More sharing options...
maly70 Posted July 25 Share Posted July 25 11 hours ago, miliuco said: Following this post https://www.insanelymac.com/forum/topic/359530-pre-release-macos-sequoia/?do=findComment&comment=2823209 and thanking all the help messages, which have been many, in the end it seems to be a hardware failure. I didn't know what else to look at, First Aid on that SSD was no mistake. I installed Sequoia b4 on it from scratch with a USB installation stick and the installation did not finish, the system rebooted and booted again from the install Sequoia icon. I changed to another SSD, partitioned, installed beta 4 from USB, migrated data and settings from a disk with Ventura and so far everything has been fine. Now to wait for the next beta and check if it updates properly. miliuco, I am happy for you congratulations 1 Link to comment Share on other sites More sharing options...
robi62 Posted July 25 Share Posted July 25 4 hours ago, Max.1974 said: Hi my friend, you need use argument "compatible" with device "14e4,43a0", because your CARD IS 4352 (43b1) and need this patch on your device properties. Test and try run with this update kexts on your EFI, don't forget OC Clean Snapshot or update with Opencore Configurator for Opencore EFI and Clover not need that. Use Proprer Tree. Use this kexts if you needed https://github.com/acidanthera/BrcmPatchRAM/releases/tag/2.6.8 Only this kexts BrcmFirmwareData.kext BrcmPatchRAM3.kext If your Bluetooth not working, try with BlueToolFixup.kext Your config plist ziped with only this arguments add 👇 config.plist.zip 5.73 kB · 1 download @Max.1974 Ill try that thank you my friend 1 Link to comment Share on other sites More sharing options...
Recommended Posts