ovidoi Posted April 9 Share Posted April 9 (edited) Hello, I'm back with a problem related to graphics acceleration, today after long attempts I managed to install sonoma 14.2.1 with the graphics card on the alienware laptop via o.c.l.p. 1.4.3 full QE/CI, italic screensaver, no display artifacts, but the only problem is that I only have hdmi output on the TV, but on the laptop's LCD display it only shows black, only the backlight is on. What other settings need to be made to display on the laptop display. I boot from the stick with OC 093, with clover 5156 it boots but the system freezes when loading the graphic part or restart. Thank you! Edited April 9 by ovidoi Link to comment Share on other sites More sharing options...
ovidoi Posted April 10 Author Share Posted April 10 A little help please, an idea, how can I have an image on the laptop display, thanks in advance. Link to comment Share on other sites More sharing options...
Slice Posted April 10 Share Posted April 10 Choose framebuffer containing LCD port. 1 Link to comment Share on other sites More sharing options...
ovidoi Posted April 10 Author Share Posted April 10 thank you, i try to patch connector to display lcd, back to answer, but for opencore need, hdmi out it work to tv qe/ci and transparency. Sorry my bad english. Link to comment Share on other sites More sharing options...
Slice Posted April 10 Share Posted April 10 qe/ci is good but your question about LCD which is a framebuffer affair. Use Clover. Link to comment Share on other sites More sharing options...
ovidoi Posted April 11 Author Share Posted April 11 (edited) I want to use clover but the system restarts when it gets to load the image components but I don't know how to make it stop happening. What is framed in red, then restarts, with opencore it does not happen. Edited April 11 by ovidoi Link to comment Share on other sites More sharing options...
Slice Posted April 11 Share Posted April 11 The frame means your graphics is not ON. 1 Link to comment Share on other sites More sharing options...
ovidoi Posted April 11 Author Share Posted April 11 Ok, and how make on? thanks Link to comment Share on other sites More sharing options...
ovidoi Posted April 11 Author Share Posted April 11 Thank you verry much Slice, i fixit with clover, now clonning to ssd, now is for testing with hdd. Today i clean EFI and upload for help another user, thank you again! Link to comment Share on other sites More sharing options...
ovidoi Posted April 14 Author Share Posted April 14 (edited) Hi, I come back with a problem, I can not enable ssd trim in Sonoma 14.2.1, in Catalina I have no problems in this case, I tried manually and with Sensei and Disk Sensei programs refuse to activate. only in Sonoma does this happen, with the same settings in config.plist in Clover. Thanks in advance. Edited April 14 by ovidoi Link to comment Share on other sites More sharing options...
ovidoi Posted April 18 Author Share Posted April 18 A little help please. Thx. Link to comment Share on other sites More sharing options...
ovidoi Posted April 20 Author Share Posted April 20 Ok, i fixit in clover/quirks/kernel/ThirdPartyDrives=on 1 Link to comment Share on other sites More sharing options...
LockDown Posted April 23 Share Posted April 23 (edited) On 4/20/2024 at 12:51 PM, ovidoi said: Ok, i fixit in clover/quirks/kernel/ThirdPartyDrives=on does clover have this feature? Yup. I see it 👍 Edited April 23 by LockDown 1 Link to comment Share on other sites More sharing options...
ovidoi Posted May 2 Author Share Posted May 2 (edited) Hi, i'm back with a little issue, in Sonoma brightness refuse to working, only software with Betterdisplay app, i have ssdtpnlf in acpi/patched, applebrightness kext, addpnlf in clover/acpi but refuse to work, AGDCBacklightControl, AGDCPluginDisplayMetrics, AppleBacklight and AppleBacklightExpert is loaded but nothing. Little help please, Thx. I forget, USB 3.0 refuse to work, i try many metod and guides, the cip is NEC, AppleUSBXHCI, AppleUSBXHCIPCI is loaded. Edited May 2 by ovidoi Link to comment Share on other sites More sharing options...
ovidoi Posted May 4 Author Share Posted May 4 @Slice please need little help to last post, thank you!🙏 Link to comment Share on other sites More sharing options...
ovidoi Posted September 7 Author Share Posted September 7 Hi frieds, God Bless OCLP Team, now Brightness slider command fn+ f4-f5 working in Sonoma 14.5 with my laptop OCLP 2.0.0 Nightly, yyyeeee, now issue is USB 3.0 with nec chip, thank you guys. Link to comment Share on other sites More sharing options...
Recommended Posts