Slingky Posted December 14, 2006 Share Posted December 14, 2006 (edited) Hi guys! please help me. I'm running MacOS 10.4.8 with kernel 8.8.1 I have a GeForce 6600 and i tried both Titan and Natit both give me NVDA,Display-A: not usable or NVDA,Display-B: not usable i also tried both outputs on my graphic card. there is my device details from profiler: NVIDIA GeForce 6600: Chipset Model: NVIDIA GeForce 6600 Type: Display Bus: PCIe VRAM (Total): 256 MB Vendor: NVIDIA (0x10de) Device ID: 0x0141 Revision ID: 0x00a2 Displays: Display: Resolution: 1024 x 768 Depth: 32-bit Color Core Image: Not Supported Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Display: And there is dmesg: Titan: By omni, built November 4, 2006 Titan: Testing for NVidia card... Titan: Found NVIDIA GeForce 6600 Titan: All set, cross your fingers! skgeosx: Ethernet address 00:13:d4:ea:e3:99 skgeosx: Enabled! skgeosx: setMulticastMode on skgeosx: setMulticastMode off NVDA,Display-B: Not usable Thanks in advance. Edited December 14, 2006 by Slingky Link to comment https://www.insanelymac.com/forum/topic/35836-natittitan-on-1048-with-geforce-6600-display-b-not-usable/ Share on other sites More sharing options...
Slingky Posted December 14, 2006 Author Share Posted December 14, 2006 Do i need to set EDID in info.plist ? Link to comment https://www.insanelymac.com/forum/topic/35836-natittitan-on-1048-with-geforce-6600-display-b-not-usable/#findComment-254975 Share on other sites More sharing options...
bofors Posted December 14, 2006 Share Posted December 14, 2006 Do i need to set EDID in info.plist ? No. Try the version of Natit posted in the this thread: http://forum.insanelymac.com/index.php?showtopic=32536 Make sure you follow the instructions on how to install it. Link to comment https://www.insanelymac.com/forum/topic/35836-natittitan-on-1048-with-geforce-6600-display-b-not-usable/#findComment-255057 Share on other sites More sharing options...
grahamb Posted December 14, 2006 Share Posted December 14, 2006 No. Try the version of Natit posted in the this thread: http://forum.insanelymac.com/index.php?showtopic=32536 Make sure you follow the instructions on how to install it. I tried to download that zip file, and a couple of other like it over the past couple of days. Despite being logged in I keep getting an error like : Sorry, but you do not have permission to use this feature. If you are not logged in, you may do so using the form below if available. Is there another site where we can download natit packages? Link to comment https://www.insanelymac.com/forum/topic/35836-natittitan-on-1048-with-geforce-6600-display-b-not-usable/#findComment-255072 Share on other sites More sharing options...
bofors Posted December 14, 2006 Share Posted December 14, 2006 I just posted another copy in this thread: http://forum.insanelymac.com/index.php?showtopic=35677 Try it. Link to comment https://www.insanelymac.com/forum/topic/35836-natittitan-on-1048-with-geforce-6600-display-b-not-usable/#findComment-255189 Share on other sites More sharing options...
grahamb Posted December 15, 2006 Share Posted December 15, 2006 I just posted another copy in this thread: http://forum.insanelymac.com/index.php?showtopic=35677 Try it. Works! Thank you! Link to comment https://www.insanelymac.com/forum/topic/35836-natittitan-on-1048-with-geforce-6600-display-b-not-usable/#findComment-255198 Share on other sites More sharing options...
grahamb Posted December 15, 2006 Share Posted December 15, 2006 I just posted another copy in this thread: http://forum.insanelymac.com/index.php?showtopic=35677 Try it. Out of interest do you have a copy of dual 0.1 as well? 0.2 seems to initialise the second display but system profiler claims nothing is connected. I've got a 6800 (0x00c1) with a VGA and a DVI connector. VGA display fires up just fine, but the DVI is the one that claims not to be connected. Cheers. Link to comment https://www.insanelymac.com/forum/topic/35836-natittitan-on-1048-with-geforce-6600-display-b-not-usable/#findComment-255208 Share on other sites More sharing options...
bofors Posted December 15, 2006 Share Posted December 15, 2006 Ok, here is the Natit Dual v0.01 version (attached). This is almost the same thing as v0.02, except that v0.02 includes an "@0,NVMT" key-value pair in the Info.plist. Natit_Dual_v0.01.zip Link to comment https://www.insanelymac.com/forum/topic/35836-natittitan-on-1048-with-geforce-6600-display-b-not-usable/#findComment-255218 Share on other sites More sharing options...
Slingky Posted December 15, 2006 Author Share Posted December 15, 2006 i tried natit dual 0.02. same thing. NVDA,Display-B: not usable i tried switching my monitor to the other output on video card...i started to have problems... hangs at boot in ide controllers... I have an Nforce4 board. it's Asus A8NSLI Premium... I'm not able to start Macos on any video card output... Think i will have to reinstall... Do you have ideas ? Link to comment https://www.insanelymac.com/forum/topic/35836-natittitan-on-1048-with-geforce-6600-display-b-not-usable/#findComment-255234 Share on other sites More sharing options...
bofors Posted December 15, 2006 Share Posted December 15, 2006 i tried switching my monitor to the other output on video card...i started to have problems... hangs at boot in ide controllers... I have an Nforce4 board. it's Asus A8NSLI Premium... This is starting to sound like a motherboard compatibility problem. You can still try v0.01. Link to comment https://www.insanelymac.com/forum/topic/35836-natittitan-on-1048-with-geforce-6600-display-b-not-usable/#findComment-255261 Share on other sites More sharing options...
Slingky Posted December 15, 2006 Author Share Posted December 15, 2006 sorry, for hang problem... i didn't had to reinstall. i boot install dvd, then use disk utility to check/repair permissions and check/repair disk i reboot and it was working again i also tried natit dual 0.01 same thing do i have to remove IONDRVSupport.kext ???? i put here the dmesg: display: family specific matching fails Natit: Starting. Natit: Setting device_type=NVDA,Parent Natit: Setting @1,device_type=display Natit: Setting @0,compatible=NVDA,NVMac Natit: Setting @1,compatible=NVDA,NVMac Natit: Setting @0,fboffset=0x00020000 Natit: Setting @1,name=NVDA,Display-B Natit: Setting @0,name=NVDA,Display-A Natit: Setting NVCAP=<data not shown> Natit: Setting @0,device_type=display Natit: Setting model=GeForce 6600 NVDA,Display-A: Not usable Link to comment https://www.insanelymac.com/forum/topic/35836-natittitan-on-1048-with-geforce-6600-display-b-not-usable/#findComment-255266 Share on other sites More sharing options...
bofors Posted December 15, 2006 Share Posted December 15, 2006 do i have to remove IONDRVSupport.kext ???? No, and you should be working with a clean install of 10.4.8 too. You might have to try finding some other hardware to test with in order to isolate the problem. It sounds like it could be your motherboard (my bet) or your video card. Link to comment https://www.insanelymac.com/forum/topic/35836-natittitan-on-1048-with-geforce-6600-display-b-not-usable/#findComment-255388 Share on other sites More sharing options...
Slingky Posted December 15, 2006 Author Share Posted December 15, 2006 thanks bofors, i finally reinstall macos from scratch and use natit dual 0.02 it worked the 1st time. only one problem, my screen colors seem to be less vivid ! maybe it's my eyes... now, winxp in parallels is a lot faster even in fullscreen. thanks you very much. Link to comment https://www.insanelymac.com/forum/topic/35836-natittitan-on-1048-with-geforce-6600-display-b-not-usable/#findComment-255596 Share on other sites More sharing options...
Recommended Posts