benmacfreak Posted November 4 Share Posted November 4 3 hours ago, jalavoui said: well old nblue as this guy name and new nblue and ofc it is crashing renaming didnt solve the issue. same kp gonna try debug it wonder what changed from old xcodeproj to new nred proj hmm i doubt this kp address is correct code is fresh from nred this is latest source - can't make it load without lilu crashes NootedBlue-master.zip 366.16 kB · 2 downloads any1 with older source plz upload it - i got no backup of old code this is the one from yesterday jala. Hope it helps. NootedBlue-master.zip Link to comment Share on other sites More sharing options...
jalavoui Posted November 4 Share Posted November 4 (edited) tks guys. anyway i will eventually need to refactor the code - there's just 2 much junk k so i've added the source back but this time with lilu.kext and sdk in the zip (it's with zip files of sle_internal and hookcase pg 24) it's fine to build it like that or update lilu+sdk from github i comment out code that could cause some unnecessary crashes doing framebuffer loading (but i think some displays will need the disabled patches) default loading is icl system framebuffer with minimum patches here's a test release. just add it to opencore and boot os x NootedBlue.kext.zip this is the linux setup at earlier stage do we need this also on os x ? i don't get the BAR 7 and 9 setup got a funny boot hang bug i boot from a usb pen if i let the pen plugged after os x boot os x detects the usb pen as disk errors and just hangs the system soa fter boot from the usb pen i remove it and os x decides to boot tks os x Edited November 4 by jalavoui Link to comment Share on other sites More sharing options...
Mastachief Posted November 4 Share Posted November 4 I do believe that Apple was in the process of the development of the driver for the Intel DG1 of the laptop dgpu and/or the pcie gpu card. They may have written enough code to do their initial testing, however only the "Asus Vivobook Flip TP470EZ 14" Touch Laptop Core i7-1165G7 16GB 512GB XᵉMAX W11" could tell. https://www.ebay.com/itm/375300423795?var=&widget_ver=artemis&media=COP . Its kind of hard to tell though since the DG1 that was shipped was on a ARM device, but they could have been testing the hardware internally. It would be good if we had a clone of the partitions from the DTK, then attempt to start testing using the Asus Vivobook Flip. Thats a good starting point, to test the DTK's response to hardware similar to it, that way we can verify how far teh devlopers went in making the code. This is Dortianas Guide to using up to two laptops via serial to do debugging --->https://dortania.github.io/OpenCore-Install-Guide/troubleshooting/kernel-debugging.html#kernel-debug-kits-optional Link to comment Share on other sites More sharing options...
Mastachief Posted November 4 Share Posted November 4 8 hours ago, jalavoui said: this is the linux setup at earlier stage do we need this also on os x ? i don't get the BAR 7 and 9 setup BAR 7 looks like main VRAM memory setup for the iGPU based on the range. BAR 9 should be for either overflow, advanced memory buffer or command streams. Link to comment Share on other sites More sharing options...
jalavoui Posted November 4 Share Posted November 4 (edited) masta latest bin works for you? i notice tgl as encoded some settings that make sense for dgpu. therefore the display paths, plane and scaler are setup from those settings and they will not work for igpu unless patched. it's kinda icl logic and the way the code forces frame1 tobe enabled for our displays and ofc the dsbmemory will have tobe replaced as we do not have a DG1 card Edited November 4 by jalavoui Link to comment Share on other sites More sharing options...
Mastachief Posted November 4 Share Posted November 4 Yes Jala, the latest Bin works. Need any logs etc? Link to comment Share on other sites More sharing options...
jalavoui Posted November 4 Share Posted November 4 (edited) you seem to have a vey stable system. idk if you wanna share some of your configs on asus thread. i do wanna see ben system start to work btw maybe u wanna play with this part of nblue. its disabled by default. i think the bytes from ventura should be easy to find in sonoma Edited November 4 by jalavoui Link to comment Share on other sites More sharing options...
Mastachief Posted November 4 Share Posted November 4 (edited) I was going to upload the fully working version on my github, but i hadnt gotten permission to use the nootedblue from you. Also I think thats a bad idea, so many non devs will flock here and pollute the thread asking for working driver.... Im uploading my current configuration with the nblue version of my config.plist here. ( i havent edited and added my corrected EDID to the nblue plist a iMac display so it wont show up as internal display in hackintool) Config.plist Showing my pci config, so you know where im coming from... pcidevices.plist The only difference would be replacing whatevergreen with nootedblue (latest) and removing the device properties for the igpu. Did you update the Master for nblue based on this new kext I saw it was edited 8 hrs ago? Post the link to the asus thread? or was it posted here? I can go through the entire thread but just wanted to be sure before i started a rat race. Edited November 4 by Mastachief Link to comment Share on other sites More sharing options...
jalavoui Posted November 4 Share Posted November 4 (edited) yes i reverted base of nred. the bin is same release. i mean your config can help others on asus intel thread not here btw i'm curious if you can get tgl frame logs Edited November 4 by jalavoui 1 Link to comment Share on other sites More sharing options...
jkbuha Posted November 5 Share Posted November 5 15 hours ago, Mastachief said: I was going to upload the fully working version on my github, but i hadnt gotten permission to use the nootedblue from you. Also I think thats a bad idea, so many non devs will flock here and pollute the thread asking for working driver.... I think that's the right approach tbh, even if I would personally like to try and adapt your latest binaries to my working alder+raptor lake setups. There is no use in getting spammed by 'wen eta' requests on this channel, especially when such good progress is being made. Happy to remain a spectator until there's something more readily available to share... Link to comment Share on other sites More sharing options...
Mastachief Posted November 5 Share Posted November 5 (edited) No, I dont Jala im going to put back the kexts in le and fix permissions and try again, i also changed the settings for the info.plist in nblue to load on tglle, however it boots to a black screen, it looks similar to when icl is booting it just goes black before the window manager, no backlight, but im on Sonoma so i figure it needs the register bytes for Sonoma. Edited November 5 by Mastachief Link to comment Share on other sites More sharing options...
jalavoui Posted November 5 Share Posted November 5 (edited) guys cmon just push the source to github if you want. all good i just manged to make tgl frame debug version boot to a different stage. updating sources soon btw the trick for tgl is to hack the connectors a bit k so tested on tgl debug but also updated production patches if any1 can figure this we might have a working tgl framebuffer. this patches just avoid crashing so need to figure out what is wrong current release will boot to a a black display with a working cursor and will produce logs Edited November 5 by jalavoui Link to comment Share on other sites More sharing options...
Mastachief Posted November 5 Share Posted November 5 (edited) Are you using AppleIntelGraphicsShared.bundle in that test? and do you still need -disablegfxfrimware as a boot-arg? Edited November 5 by Mastachief Link to comment Share on other sites More sharing options...
jalavoui Posted November 5 Share Posted November 5 (edited) no masta this is framebuffer only testing btw i need to update nblue again cause of missing production symbol. tested without -disablegfxfrimware but it think u guys should try debug version as it produces lots of logs. about github if u wanna upload just post link here so others can follow Edited November 5 by jalavoui Link to comment Share on other sites More sharing options...
Mastachief Posted November 5 Share Posted November 5 Sure, see below https://github.com/becoolio/Latitude-5520-Hackintosh 1 Link to comment Share on other sites More sharing options...
jalavoui Posted November 5 Share Posted November 5 (edited) i was looking at my nred and found out this. this allows injecting values on aGPm. if any1 wanna play with it just add this to nblue info.plist thinking a bit about this its possible that agpm just helps hang the driver - we will see in the future. setting this to a invalid mac as the "feature" to partially disable agpm tested tgl production code. it does same as debug with extra warn for low stolen memory. to swap debug/prodution change patches calls in nblue nblue src code at pg 24 Edited November 5 by jalavoui 1 Link to comment Share on other sites More sharing options...
Stezza88 Posted November 5 Share Posted November 5 (edited) 21 hours ago, Mastachief said: Yes Jala, the latest Bin works. Need any logs etc? Which framebuffer are you loading, using nblue? @Mastachief ICL with Graphicsschedulerselect= 0 ? I thinked gen7ICL... you meant ICLLP.. ok ... at me it stall and gpu goes in overheat.. Edited November 5 by ASUS Vivobook Link to comment Share on other sites More sharing options...
Mastachief Posted November 5 Share Posted November 5 (edited) Yes, I am loading ICL framebuffer. I am using the latest nblue master. x.log See the attached bootlog whats your info.plist? also did you make edits that are not in the master? Edited November 5 by Mastachief 1 Link to comment Share on other sites More sharing options...
jalavoui Posted November 5 Share Posted November 5 masta what am i missing here? this is from your log 2024-11-05 13:27:01.547870-0500 localhost kernel[0]: (IOPCIFamily) [ PCI configuration begin ] 2024-11-05 13:27:01.547871-0500 localhost kernel[0]: (IOPCIFamily) IOPCIConfigurator::configure kIOPCIEnumerationWaitTime is 900 2024-11-05 13:27:01.547887-0500 localhost kernel[0]: kPEDisableScreen -1 2024-11-05 13:27:01.549221-0500 localhost kernel[0]: (AppleACPIEC) ACPI: no ECDT 2024-11-05 13:27:01.559425-0500 localhost kernel[0]: initialize_screen: b=4000000000, w=00000780, h=00000438, r=00001E00, d=00000001 2024-11-05 13:27:01.559522-0500 localhost kernel[0]: kPEEnableScreen 1 2024-11-05 13:27:01.559523-0500 localhost kernel[0]: (IOPCIFamily) console relocated to 0x4000000000 2024-11-05 13:27:01.566502-0500 localhost kernel[0]: (IOPCIFamily) [ PCI configuration end, bridges 7, devices 20 ] and mine 2024-11-01 15:11:46.558790+0000 localhost kernel[0]: (IOPCIFamily) [ PCI configuration begin ] 2024-11-01 15:11:46.558792+0000 localhost kernel[0]: kPEDisableScreen -1 2024-11-01 15:11:46.565599+0000 localhost kernel[0]: (IOPCIFamily) head.start 0x0 2024-11-01 15:11:46.565600+0000 localhost kernel[0]: (IOPCIFamily) head.size 0xcf8 2024-11-01 15:11:46.565601+0000 localhost kernel[0]: (IOPCIFamily) head.end 0xcf8 2024-11-01 15:11:46.565602+0000 localhost kernel[0]: (IOPCIFamily) head.alignment 0x1 2024-11-01 15:11:46.565602+0000 localhost kernel[0]: (IOPCIFamily) allocs: 2024-11-01 15:11:46.565603+0000 localhost kernel[0]: (IOPCIFamily) [end] 2024-11-01 15:11:46.565603+0000 localhost kernel[0]: (IOPCIFamily) ------ 2024-11-01 15:11:46.565604+0000 localhost kernel[0]: (IOPCIFamily) head.start 0xd00 2024-11-01 15:11:46.565604+0000 localhost kernel[0]: (IOPCIFamily) head.size 0xf300 2024-11-01 15:11:46.565605+0000 localhost kernel[0]: (IOPCIFamily) head.end 0x10000 2024-11-01 15:11:46.565605+0000 localhost kernel[0]: (IOPCIFamily) head.alignment 0x1 2024-11-01 15:11:46.565606+0000 localhost kernel[0]: (IOPCIFamily) allocs: 2024-11-01 15:11:46.565606+0000 localhost kernel[0]: (IOPCIFamily) [0].start 0x164e 2024-11-01 15:11:46.565607+0000 localhost kernel[0]: (IOPCIFamily) [0].size 0x2 2024-11-01 15:11:46.565607+0000 localhost kernel[0]: (IOPCIFamily) [0].end 0x1650 2024-11-01 15:11:46.565608+0000 localhost kernel[0]: (IOPCIFamily) [0].alignment 0x1 2024-11-01 15:11:46.565608+0000 localhost kernel[0]: (IOPCIFamily) [1].start 0x1854 2024-11-01 15:11:46.565609+0000 localhost kernel[0]: (IOPCIFamily) [1].size 0x4 2024-11-01 15:11:46.565609+0000 localhost kernel[0]: (IOPCIFamily) [1].end 0x1858 2024-11-01 15:11:46.565610+0000 localhost kernel[0]: (IOPCIFamily) [1].alignment 0x1 2024-11-01 15:11:46.565610+0000 localhost kernel[0]: (IOPCIFamily) [2].start 0x3000 2024-11-01 15:11:46.565611+0000 localhost kernel[0]: (IOPCIFamily) [2].size 0x1000 2024-11-01 15:11:46.565611+0000 localhost kernel[0]: (IOPCIFamily) [2].end 0x4000 2024-11-01 15:11:46.565612+0000 localhost kernel[0]: (IOPCIFamily) [2].alignment 0x1000 2024-11-01 15:11:46.565612+0000 localhost kernel[0]: (IOPCIFamily) [3].start 0x4000 2024-11-01 15:11:46.565613+0000 localhost kernel[0]: (IOPCIFamily) [3].size 0x40 2024-11-01 15:11:46.565613+0000 localhost kernel[0]: (IOPCIFamily) [3].end 0x4040 2024-11-01 15:11:46.565614+0000 localhost kernel[0]: (IOPCIFamily) [3].alignment 0x40 2024-11-01 15:11:46.565615+0000 localhost kernel[0]: (IOPCIFamily) [4].start 0xefa0 2024-11-01 15:11:46.565615+0000 localhost kernel[0]: (IOPCIFamily) [4].size 0x20 2024-11-01 15:11:46.565616+0000 localhost kernel[0]: (IOPCIFamily) [4].end 0xefc0 2024-11-01 15:11:46.565616+0000 localhost kernel[0]: (IOPCIFamily) [4].alignment 0x20 2024-11-01 15:11:46.565617+0000 localhost kernel[0]: (IOPCIFamily) [5].start 0xfd60 2024-11-01 15:11:46.565617+0000 localhost kernel[0]: (IOPCIFamily) [5].size 0x4 2024-11-01 15:11:46.565618+0000 localhost kernel[0]: (IOPCIFamily) [5].end 0xfd64 2024-11-01 15:11:46.565618+0000 localhost kernel[0]: (IOPCIFamily) [5].alignment 0x1 2024-11-01 15:11:46.565619+0000 localhost kernel[0]: (IOPCIFamily) [end] 2024-11-01 15:11:46.565619+0000 localhost kernel[0]: (IOPCIFamily) ------ 2024-11-01 15:11:46.565620+0000 localhost kernel[0]: (IOPCIFamily) ------------------------------------ 2024-11-01 15:11:46.565620+0000 localhost kernel[0]: (IOPCIFamily) head.start 0x0 2024-11-01 15:11:46.565621+0000 localhost kernel[0]: (IOPCIFamily) head.size 0xcf8 2024-11-01 15:11:46.565622+0000 localhost kernel[0]: (IOPCIFamily) head.end 0xcf8 2024-11-01 15:11:46.565622+0000 localhost kernel[0]: (IOPCIFamily) head.alignment 0x1 2024-11-01 15:11:46.565623+0000 localhost kernel[0]: (IOPCIFamily) allocs: 2024-11-01 15:11:46.565623+0000 localhost kernel[0]: (IOPCIFamily) [end] 2024-11-01 15:11:46.565623+0000 localhost kernel[0]: (IOPCIFamily) ------ 2024-11-01 15:11:46.565624+0000 localhost kernel[0]: (IOPCIFamily) head.start 0xd00 2024-11-01 15:11:46.565624+0000 localhost kernel[0]: (IOPCIFamily) head.size 0xf300 2024-11-01 15:11:46.565625+0000 localhost kernel[0]: (IOPCIFamily) head.end 0x10000 2024-11-01 15:11:46.565626+0000 localhost kernel[0]: (IOPCIFamily) head.alignment 0x1 2024-11-01 15:11:46.565626+0000 localhost kernel[0]: (IOPCIFamily) allocs: 2024-11-01 15:11:46.565627+0000 localhost kernel[0]: (IOPCIFamily) [0].start 0x164e 2024-11-01 15:11:46.565627+0000 localhost kernel[0]: (IOPCIFamily) [0].size 0x2 2024-11-01 15:11:46.565628+0000 localhost kernel[0]: (IOPCIFamily) [0].end 0x1650 2024-11-01 15:11:46.565629+0000 localhost kernel[0]: (IOPCIFamily) [0].alignment 0x1 2024-11-01 15:11:46.565629+0000 localhost kernel[0]: (IOPCIFamily) [1].start 0x1854 2024-11-01 15:11:46.565630+0000 localhost kernel[0]: (IOPCIFamily) [1].size 0x4 2024-11-01 15:11:46.565630+0000 localhost kernel[0]: (IOPCIFamily) [1].end 0x1858 2024-11-01 15:11:46.565631+0000 localhost kernel[0]: (IOPCIFamily) [1].alignment 0x1 2024-11-01 15:11:46.565631+0000 localhost kernel[0]: (IOPCIFamily) [2].start 0x3000 2024-11-01 15:11:46.565632+0000 localhost kernel[0]: (IOPCIFamily) [2].size 0x1000 2024-11-01 15:11:46.565632+0000 localhost kernel[0]: (IOPCIFamily) [2].end 0x4000 2024-11-01 15:11:46.565633+0000 localhost kernel[0]: (IOPCIFamily) [2].alignment 0x1000 2024-11-01 15:11:46.565634+0000 localhost kernel[0]: (IOPCIFamily) [3].start 0x4000 2024-11-01 15:11:46.565634+0000 localhost kernel[0]: (IOPCIFamily) [3].size 0x40 2024-11-01 15:11:46.565635+0000 localhost kernel[0]: (IOPCIFamily) [3].end 0x4040 2024-11-01 15:11:46.565635+0000 localhost kernel[0]: (IOPCIFamily) [3].alignment 0x40 2024-11-01 15:11:46.565636+0000 localhost kernel[0]: (IOPCIFamily) [4].start 0xefa0 2024-11-01 15:11:46.565636+0000 localhost kernel[0]: (IOPCIFamily) [4].size 0x20 2024-11-01 15:11:46.565637+0000 localhost kernel[0]: (IOPCIFamily) [4].end 0xefc0 2024-11-01 15:11:46.565637+0000 localhost kernel[0]: (IOPCIFamily) [4].alignment 0x20 2024-11-01 15:11:46.565638+0000 localhost kernel[0]: (IOPCIFamily) [5].start 0xfd60 2024-11-01 15:11:46.565639+0000 localhost kernel[0]: (IOPCIFamily) [5].size 0x4 2024-11-01 15:11:46.565639+0000 localhost kernel[0]: (IOPCIFamily) [5].end 0xfd64 2024-11-01 15:11:46.565640+0000 localhost kernel[0]: (IOPCIFamily) [5].alignment 0x1 2024-11-01 15:11:46.565640+0000 localhost kernel[0]: (IOPCIFamily) [end] 2024-11-01 15:11:46.565641+0000 localhost kernel[0]: (IOPCIFamily) ------ 2024-11-01 15:11:46.565641+0000 localhost kernel[0]: (IOPCIFamily) ------------------------------------ 2024-11-01 15:11:46.566500+0000 localhost kernel[0]: (AppleACPIEC) ACPI: no ECDT 2024-11-01 15:11:46.568506+0000 localhost kernel[0]: initialize_screen: b=4000000000, w=00000780, h=00000438, r=00001E00, d=00000001 2024-11-01 15:11:46.568600+0000 localhost kernel[0]: kPEEnableScreen 1 2024-11-01 15:11:46.568601+0000 localhost kernel[0]: (IOPCIFamily) console relocated to 0x4000000000 2024-11-01 15:11:46.568603+0000 localhost kernel[0]: (IOPCIFamily) [ PCI configuration end, bridges 2, devices 18 ] no idea why this Link to comment Share on other sites More sharing options...
Mastachief Posted November 5 Share Posted November 5 (edited) I get a boot now, my default boot is on GitHub, I only added the IGLogLevel=8 and -liludbg and the following settings. Settings in nblue info.plist, it correctly identifies the tigerlake igpu without us having to patch under another device id, this is using ICL Debug in LE with Graphiscschedulerselect=5, plist and logs attached. Info.plist x.log lilu.log My ID is 9A49 Edited November 5 by Mastachief 1 Link to comment Share on other sites More sharing options...
jalavoui Posted November 5 Share Posted November 5 (edited) masta the icl frame debug should work fine for you. try install in /L/E the tgl graph you installed is inactive in nblue (need path change in code to /L/E and com.apple to com.xxxxx rename inside nblue code). anyway default opt is /S/L/E current active nblue patches are for tgl frame debug (can be changed to production inside nblue code) gonna check your acpi patches in github maybe i figure out my pci crash at system.log i didnt change nblue info.plist (i only move current card ids to the frame i wanna test) Edited November 5 by jalavoui Link to comment Share on other sites More sharing options...
jalavoui Posted November 6 Share Posted November 6 (edited) so i get bored after reading all this posts so i decided to install this on my system is this a fake ? x.log.zip better put this here tobe safe -added sleep code disable ty all for the support Edited November 7 by jalavoui Link to comment Share on other sites More sharing options...
Mastachief Posted November 6 Share Posted November 6 (edited) I get a black screen when it completes booting, the backlight is on, no cursor, I can see that its loading the tgl frame based on the on-screen verbose log while booting, however the log isnt saved to disk for some reason, using my updated EFI on my USB stick. I know you said default opt is /S/L/E but framebuffer is set to L/E in latest Nblue for TGL, or is it that all the tgl sle files go to sle and then use the tgl frame meant for le? 🧐 Edited November 6 by Mastachief Link to comment Share on other sites More sharing options...
jalavoui Posted November 6 Share Posted November 6 (edited) masta better keep /S/L/E logic for testing tgl graph kext cause of dependencies for now this are the binarys of the AppleIntelTGLGraphicsFramebuffer.kext debug for testing install to /L/E and fix permissions type in terminal sudo -i rm /Library/KernelCollections/AuxiliaryKernelExtensions.kc chmod -R 755 /Library/Extensions/* chown -R root:wheel /Library/Extensions/* install nblue to OC/kexts remove -v if you get no boot hang Edited November 7 by jalavoui Link to comment Share on other sites More sharing options...
Mastachief Posted November 6 Share Posted November 6 (edited) I get igpu hang, I installed hookcase and tglframe in le, and used the latest nblue in my USB OC. I made sure tgl kexts were not in sle anymore, did a kernel cache rebuild for both boot cache and system/library/extensions cache Is it because I'm on Sonoma? maybe I have to reinstall Ventura.....maybe i have bugged sle as you said jala 😕. Kernel cache rebuild, I tried taking out the USB a few seconds after I choose the boot volume in opencore picker unsupported PCH, which is normal Lilu patch messages, which look okay. Edited November 6 by Mastachief Link to comment Share on other sites More sharing options...
Recommended Posts