Max.1974 Posted March 6 Share Posted March 6 11 horas atrás, derpuma disse: @miliuco Você me confundiu com sua pasta 14.3.1. Acho que você escolheu um kext errado! Não deveria ser o IntelBTPatcherkext nele, em vez do IntelBluetoothInjector.kext. Hi, with Monterey works because you are using IntelBluetoothInjector, but in Ventura and Sonoma not use this kext, is the recommendation instruction on OpenIntel Wireless GIT HUB Olny use this with Sonoma or Ventura Im post for you my kexts, are you tested ? 1 Link to comment Share on other sites More sharing options...
Anto65 Posted March 6 Share Posted March 6 https://openintelwireless.github.io/IntelBluetoothFirmware/FAQ.html#intelbluetoothinjector 3 Link to comment Share on other sites More sharing options...
derpuma Posted March 6 Share Posted March 6 As you can see: kextstat | grep -v com.apple tells me that it does not load IntelBluetoothFirmware.kext while booting into Sonoma. So the Question is, why does it not load the IntelBluetoothFirmware.kext?! Any ideas? As you can see here, the kext folder has the kext and the rest of the config is also configured as it should. Spoiler 1 Link to comment Share on other sites More sharing options...
miliuco Posted March 6 Author Share Posted March 6 @derpuma Put IntelBluetoothFirmware.kext before IntelBTPatcher.kext and BluetoolFixup.kext. In this order. Try and comment. Link to comment Share on other sites More sharing options...
derpuma Posted March 6 Share Posted March 6 7 minutes ago, miliuco said: @derpuma Put IntelBluetoothFirmware.kext before IntelBTPatcher.kext and BluetoolFixup.kext. In this order. Try and comment. Same behaviour. Does not load IntelBluetoothFirmware.kext. 1 Link to comment Share on other sites More sharing options...
miliuco Posted March 6 Author Share Posted March 6 @derpuma This issue has me completely confused. Why is it not loading? 🙁 Link to comment Share on other sites More sharing options...
derpuma Posted March 6 Share Posted March 6 I don't know. I also tried to map my USB Ports in Windows, but it still does not load. Is there a way to map the USB Ports directly under Sonoma? Link to comment Share on other sites More sharing options...
ichelash Posted March 6 Share Posted March 6 24 minutes ago, derpuma said: I don't know. I also tried to map my USB Ports in Windows, but it still does not load. Is there a way to map the USB Ports directly under Sonoma? can you post you config without your serial..i want to check something... Link to comment Share on other sites More sharing options...
derpuma Posted March 6 Share Posted March 6 (edited) @ichelash Sure, no problem. config.plist FYI, I deleted the USB Portmapping, as it did not gave me any benefits. I can see the BT Part of the AX210s in UNRAIDs USB PLugin. But it does not load while booting into Sonoma. It does while booting into Monterey. Edited March 6 by derpuma 2 Link to comment Share on other sites More sharing options...
ichelash Posted March 7 Share Posted March 7 9 hours ago, derpuma said: @ichelash Sure, no problem. config.plist 22.23 kB · 2 downloads FYI, I deleted the USB Portmapping, as it did not gave me any benefits. I can see the BT Part of the AX210s in UNRAIDs USB PLugin. But it does not load while booting into Sonoma. It does while booting into Monterey. I don't see any issue with that config....so i'm unsure what's wrong..but can you try adding this patches 👇 Link to comment Share on other sites More sharing options...
derpuma Posted March 7 Share Posted March 7 @ichelash That did not fix it too. Problem I discovered now is, that my Hackintool does not show me any USB Ports at all. I pressed wipe, but refresh does not load up any USB Ports again. Any Idea why? Link to comment Share on other sites More sharing options...
ichelash Posted March 7 Share Posted March 7 1 minute ago, derpuma said: @ichelash That did not fix it too. Problem I discovered now is, that my Hackintool does not show me any USB Ports at all. I pressed wipe, but refresh does not load up any USB Ports again. Any Idea why? Now try using USBinject all kext..instead and remove usbtool & utbmap see if it populate Link to comment Share on other sites More sharing options...
Anto65 Posted March 7 Share Posted March 7 ... enable port limit in kernel -> quirks to 1 Link to comment Share on other sites More sharing options...
derpuma Posted March 7 Share Posted March 7 (edited) @ichelash I thought USBinject.kext is not nessecary in Sonoma anymore? I can try this. @Antonuccio I can try this too... I'm currently running my Windows VM and the USB ports actually look fine there. In Sonoma I need only the ASMedia USB 3.1 eXtensible host controller – 1.10 (Microsoft) | is enough for me USB 3.0 (XHCI) | 4 ports. The AX210s BT USB should be the one on Port 6 I guess? Update: Booting with USBinject.kext and Kernel Quirks XHCIPortLimit "on" did not bring the USB Ports back in Hackintool. Edited March 7 by derpuma Link to comment Share on other sites More sharing options...
ichelash Posted March 7 Share Posted March 7 23 minutes ago, derpuma said: @ichelash I thought USBinject.kext is not nessecary in Sonoma anymore? I can try this. @Antonuccio I can try this too... I'm currently running my Windows VM and the USB ports actually look fine there. In Sonoma I need only the ASMedia USB 3.1 eXtensible host controller – 1.10 (Microsoft) | is enough for me USB 3.0 (XHCI) | 4 ports. The AX210s BT USB should be the one on Port 6 I guess? Update: Booting with USBinject.kext and Kernel Quirks XHCIPortLimit "on" did not bring the USB Ports back in Hackintool. Send me full EFI Link to comment Share on other sites More sharing options...
derpuma Posted March 7 Share Posted March 7 @ichelash This is the last EFI I tried. I included XhciPortLimit + ReleaseUsbOwnership and ExtendBTFeatureFlags. Also USBToolBox.kext and UTBMap.kext. But this did not let me boot into Sonoma. OpenCore ended in a black screen after booting up Sonoma and Monitors did not show up OS. 1 Link to comment Share on other sites More sharing options...
Anto65 Posted March 7 Share Posted March 7 (edited) Try if you want 🙃 Add to the last working EFI SSDT-XHC.aml.zip in ACPI and config.plist , delete UTBMAP, Usbinject..,Port limit If the USBs are shown 🤞 you can enable/disable the ports or change the type of connector by following here the example ... if needed Spoiler Edited March 7 by Antonuccio 3 Link to comment Share on other sites More sharing options...
derpuma Posted March 7 Share Posted March 7 @Antonuccio Thx a lot for your effort and help. I booted into Sonoma with this config.plist, but sill no USB Ports in Hackintool. Do you think I should try a new Installation of Sonoma and try it there? I am not sure what'S messing up my USB Ports under Sonoma at all... config.plist Link to comment Share on other sites More sharing options...
ichelash Posted March 7 Share Posted March 7 10 minutes ago, derpuma said: @Antonuccio Thx a lot for your effort and help. I booted into Sonoma with this config.plist, but sill no USB Ports in Hackintool. Do you think I should try a new Installation of Sonoma and try it there? I am not sure what'S messing up my USB Ports under Sonoma at all... config.plist 22.01 kB · 1 download Try this..https://filetransfer.io/data-package/0LuB5567#link Link to comment Share on other sites More sharing options...
derpuma Posted March 7 Share Posted March 7 33 minutes ago, ichelash said: Try this..https://filetransfer.io/data-package/0LuB5567#link No sorry, it does not work. I will try a new Install of Sonoma and try it there. There migth be something messed up with my Sonoma while updating it from Monterey?! Not sure what it is, but an new installation will not take that much time with KVM, most time takes the creation of the boot image. I report back! Link to comment Share on other sites More sharing options...
fabiosun Posted March 7 Share Posted March 7 (edited) @derpumahave you passed through your USb controller where you connect your AX210 BT cable? you can also pass it as single USB device Edited March 7 by mariosun 1 Link to comment Share on other sites More sharing options...
derpuma Posted March 7 Share Posted March 7 7 minutes ago, mariosun said: @derpumahave you passed through your USb controller where you connect your AX210 BT cable? you can also pass it as single USB device Sure, I did that. But this does not bring BT to life, if the IntelBluetoothFirmware.kext does not load at boot. <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x8087'/> <product id='0x0032'/> <address bus='1' device='4'/> </source> <alias name='hostdev9'/> <address type='usb' bus='0' port='2'/> </hostdev> Link to comment Share on other sites More sharing options...
fabiosun Posted March 7 Share Posted March 7 (edited) could you post an IOREG ? Edited March 7 by mariosun Link to comment Share on other sites More sharing options...
derpuma Posted March 7 Share Posted March 7 My USBPorts are messed up and I am not able to get them back or restore them via USBInjectall.kext, Hackintool Reload USB or anyting else. Hackintool does not load any USB Port. IOReg see screenshot. Not sure why and how this is like it is, but I am going to install a new Sonoma now and try from there. Right now I am struggeling in creating an img file fron the Sonoma Install App due to the immense diskspace it needs, which I do not have right now. I need an img file cause in install into a virtual KVM. Tools like Mist or AnymacOS also dont work increating and image... I will report back when I am ready and how the new system behaves. Link to comment Share on other sites More sharing options...
derpuma Posted March 10 Share Posted March 10 Anyone updated to 14.4 and can confirm, that the BT is working with the kext from 14.4beta? Link to comment Share on other sites More sharing options...
Recommended Posts