Matgen84 Posted September 7, 2023 Share Posted September 7, 2023 2 hours ago, ham4ever said: i used to have BlueToolFixup.kext, BrcmFirmwareData.kext en BrcmPatchRAM3.kext . i used them now also but still no bluetooth. yes there is some cable from the card to the mobo. BCM4331 was native card before Sonoma like my Fenvi T919 (BCM4360). I don't have Wifi but Bluetooth coniiue to work natively (no kexts). Do you try to reset module from Buletooth icon in Menu Bar. Link to comment Share on other sites More sharing options...
Anto65 Posted September 7, 2023 Share Posted September 7, 2023 Probably need to map the USB ports properly or if did maybe that port (where the card is connected) has been excluded 2 Link to comment Share on other sites More sharing options...
ham4ever Posted September 8, 2023 Share Posted September 8, 2023 (edited) 23 hours ago, Max.1974 said: @ham4ever Are you try use Hackintool to inject your device properties compatible ? Works fine to me on my Lenovo I'm have BCM 4352 pcie14e4,43b1 and put compatible like device properties on plist on print screen. Yes is also injected in device properties. 22 hours ago, Matgen84 said: BCM4331 was native card before Sonoma like my Fenvi T919 (BCM4360). I don't have Wifi but Bluetooth coniiue to work natively (no kexts). Do you try to reset module from Buletooth icon in Menu Bar. as far i remember i always had to use kext to get my card to work, 22 hours ago, antuneddu said: Probably need to map the USB ports properly or if did maybe that port (where the card is connected) has been excluded how do i make sure that the port isnt excluded ? EDIT: omg you guys, it was the usb cable not attached good to the mobo, i must have touched it when i installed new GPU, i feel so stupid. Thank you all. Edited September 8, 2023 by ham4ever SOLVED 4 Link to comment Share on other sites More sharing options...
ham4ever Posted September 8, 2023 Share Posted September 8, 2023 On 9/6/2023 at 8:20 PM, miliuco said: Did you have any Bluetooth related kext before now? (Stupid question) Do you have the USB cable from the card plugged into a USB port in the mobo? YOU were totally right with USB cable, it wasn't fully attached, i must have touched it when i installed new GPU. Thanks. 3 Link to comment Share on other sites More sharing options...
CloverLeaf Posted September 8, 2023 Share Posted September 8, 2023 (edited) I managed to fix the Wi-Fi of my EliteDesk (BCM94360NG) following This guide. Now everything works (2.4G/5G) just fine. BIG THANKS to everybody working on this project! Summarizing the steps: Kexts: IOSkywalkFamily.kext IO80211FamilyLegacy.kext AirportBrcmFixup.kext Kext organized and added MinKernel as per guide. IMPORTANT: Blocked IOSkywalkFamily under Kernel/Block NVRAM settings: csr-active-config: 03080000 Boot args: amfi=0x80 Misc/Security settings: SecureBootModel -> Disabled OpenCoreLegacyPatcher: OCLP 0.6.9 Nightly used to patch the Modern Wireless Restart the system and enjoy Edited September 30, 2023 by CloverLeaf 5 1 Link to comment Share on other sites More sharing options...
miliuco Posted September 8, 2023 Share Posted September 8, 2023 @CloverLeaf Which section of the guide? Editing OCLP file or spoofing a compatible card? Link to comment Share on other sites More sharing options...
kaoskinkae Posted September 13, 2023 Share Posted September 13, 2023 Atheros AR93xx Wifi AR93xx TP-LINK WDN-4800 PCI168c,30 AirPortAtheros40 IDs 0x0030, # AR93xx With the new RC1 beta of macOS 14 Sonoma, has anyone gotten Wi-Fi support for ARTHERO? In my case, although it seems in the OCPL at night, the Kepler and the legacy WiFi do not work 1 Link to comment Share on other sites More sharing options...
mnfesq Posted September 15, 2023 Share Posted September 15, 2023 (edited) I installed Sonoma RC1 to my main system partition believing that Sonoma was running smoothly enough on my test partition to justify it. However, I encountered a problem with OCLP patching of the wireless adapter that I had not encountered on my test partition. (Both use the same EFI to boot.) Has anyone else encountered this? These are essential kexts and I have the most current versions installed. Any ideas what to do? I have tried the recommended installation settings but keep getting this patch failure. Thanks for your suggestions. EDIT: Problem solved. This error was caused primarily because this was not a clean install. It appears that, in June 2022, I put a copy of VirtualSMC into my /Library/Extensions/ folder. It was version 1.3.0. The current version is 1.3.3. The dependencies are different. That is what caused OCLP to not be able to find the dependent kext. Case closed. (Yay!) Edited September 16, 2023 by mnfesq 1 Link to comment Share on other sites More sharing options...
jlrycm Posted September 16, 2023 Share Posted September 16, 2023 (edited) Hello everyone! Would these wifi-BT cards work in macOS Sonoma? Gigabyte WiFi 6E GC-WBAX2400R (2x2 802.11 ax/Tri-Band WiFi (2.4GHz, 5GHz, & 6GHz)/ Bluetooth 5.3/ MU-MIMO/ WPA3/ PCIe Expansion Card) https://a.co/d/9aeGYQw PCI-E WiFi Card for MacOS Windows 7/8/10/11 802.11a/g/n/ac BT 4.0 PCI-E PCI Network Adapter mac-Compatible Wi-Fi AirDrop Handoff Instant Hotspot macOS MIMO Mac OS X natively Supported BCM4360 AC1200 https://a.co/d/8Iofwm0 Edited September 16, 2023 by jlrycm Link to comment Share on other sites More sharing options...
eSaF Posted September 16, 2023 Share Posted September 16, 2023 1 hour ago, jlrycm said: PCI-E WiFi Card for MacOS Windows 7/8/10/11 802.11a/g/n/ac BT 4.0 PCI-E PCI Network Adapter mac-Compatible Wi-Fi AirDrop Handoff Instant Hotspot macOS MIMO Mac OS X natively Supported BCM4360 AC1200 https://a.co/d/8Iofwm0 The Fenvi one should be ok with the OCLP patch. Don't know about the Gigabyte one. 3 Link to comment Share on other sites More sharing options...
jlrycm Posted September 16, 2023 Share Posted September 16, 2023 1 hour ago, eSaF said: The Fenvi one should be ok with the OCLP patch. Don't know about the Gigabyte one. Thanks @eSaF I have the Fenvi installed in my build. I was asking about the Gigabyte one because it has the Realtek RTL8852CE and I read before that it may be a prospect if kexts are available. 1 Link to comment Share on other sites More sharing options...
Slice Posted September 20, 2023 Share Posted September 20, 2023 On 9/17/2023 at 2:10 AM, jlrycm said: Thanks @eSaF I have the Fenvi installed in my build. I was asking about the Gigabyte one because it has the Realtek RTL8852CE and I read before that it may be a prospect if kexts are available. Even for linux there is a problem to get a driver. May be some developer wish to create the driver for macOS based on codes for Linux. We will applaud him. 2 Link to comment Share on other sites More sharing options...
Alpha22 Posted September 26, 2023 Share Posted September 26, 2023 question: certainly has already been done, I wanted to ask for a card like Fenvi T919 that is native with macOS Sonoma with chipset Broadcom Link to comment Share on other sites More sharing options...
Cyberdevs Posted September 26, 2023 Share Posted September 26, 2023 13 minutes ago, Alpha22 said: question: certainly has already been done, I wanted to ask for a card like Fenvi T919 that is native with macOS Sonoma with chipset Broadcom If it has native support in macOS you can use OCLP to patch it 1 Link to comment Share on other sites More sharing options...
Alpha22 Posted September 26, 2023 Share Posted September 26, 2023 1 minute ago, Cyberdevs said: If it has native support in macOS you can use OCLP to patch it I meant without using any patches Link to comment Share on other sites More sharing options...
Cyberdevs Posted September 26, 2023 Share Posted September 26, 2023 Without the patches it won't work, unless Sonoma supports is natively like the WiFi chips in 2019 and 2020 iMacs or any other Mac computer that is natively supported with macOS Sonoma. 1 Link to comment Share on other sites More sharing options...
Alpha22 Posted September 26, 2023 Share Posted September 26, 2023 question: once I have used the OCLP patch, can I put csr-active-config back 00000000 or should I leave it 03080000 Link to comment Share on other sites More sharing options...
Cyberdevs Posted September 26, 2023 Share Posted September 26, 2023 Just now, Alpha22 said: question: once I have used the OCLP patch, can I put csr-active-config back 00000000 or should I leave it 03080000 You need to keep SIP set as 030800000, if you use 00000000 it will prevent for added kext to load properly unless the devs find a way to go around SIP. 2 Link to comment Share on other sites More sharing options...
Alpha22 Posted September 26, 2023 Share Posted September 26, 2023 2 minutes ago, Cyberdevs said: You need to keep SIP set as 030800000, if you use 00000000 it will prevent for added kext to load properly unless the devs find a way to go around SIP. thanks for the answers Link to comment Share on other sites More sharing options...
DuongTHVN Posted September 28, 2023 Share Posted September 28, 2023 Any solution for DW1560 a.k.a BCM94352z? when i use AirportBrcmFixup.kext and AirportBrcmFixup.kext/Contents/PlugIns/AirPortBrcmNIC_Injector.kext it not show on hackintool and no wifi =.= Link to comment Share on other sites More sharing options...
miliuco Posted September 28, 2023 Share Posted September 28, 2023 @DuongTHVN New device-ids have been added to the latest OCLP Sonoma 0.6.9: device-id pci12e4,43B1 >> BCM4352 device-id pci12e4,43B2 >> BCM4352 (2.4 GHz). What is yours? Link to comment Share on other sites More sharing options...
SavageAUS Posted September 29, 2023 Author Share Posted September 29, 2023 Can we use AMFIPass.kext instead of the boot arg? Using the boot arg make Logitech G Hub not work at all. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Cyberdevs Posted September 29, 2023 Share Posted September 29, 2023 3 minutes ago, SavageAUS said: Can we use AMFIPass.kext instead of the boot arg? Using the boot arg make Logitech G Hub not work at all. Yes you can. You just might need to use -amfipassbeta boot arg. I'm not sure if the kexts has been updated yet. 4 Link to comment Share on other sites More sharing options...
miliuco Posted September 29, 2023 Share Posted September 29, 2023 5 hours ago, Cyberdevs said: Yes you can. You just might need to use -amfipassbeta boot arg. I'm not sure if the kexts has been updated yet. Kexts seems to be unchanged, boot arg still required. 3 Link to comment Share on other sites More sharing options...
Max.1974 Posted September 29, 2023 Share Posted September 29, 2023 On 9/28/2023 at 10:40 AM, miliuco said: @DuongTHVN New device-ids have been added to the latest OCLP Sonoma 0.6.9: device-id pci12e4,43B1 >> BCM4352 device-id pci12e4,43B2 >> BCM4352 (2.4 GHz). What is yours? My friend, can you said to me if device BCM4352, pci14e4,43b1 is included on OCLP 0.6.9? We can include manually? Im use with compatible Device Properties on Opcencore plist, and works fine, but with this new release from Sonoma and compiled OCLP or use Nitghly Build not works But I need use AirportBrcmFixup.kext with Ventura to works. Thanks all Link to comment Share on other sites More sharing options...
Recommended Posts