[pre-release] macOS Sonoma

[naiclub]

5 hours ago, SavageAUS said:

Problem is Ventura is installed on the drive first and even if booted into Sonoma I cannot remove it.
Might be time to test fresh installs.


Sent from my iPhone using Tapatalk

 

4 hours ago, surenmunoo said:

If you partitioned your drive after installing Ventura and then installed Sonoma, you can only delete the partition you created 2nd so you won't be able to delete the first partition that Ventura sits in. 

I think that's probably true as you said.
But looking at the other side, you use USB boot can delete it. I have tried it and it works well.

[Slice]

Strange. I have one drive with several partitions and I am able to add and delete any partition I like. Recently I shrink Mojave partition to create Sonoma partition. It is long duration process but success.

[naiclub]

50 minutes ago, Slice said:

Strange. I have one drive with several partitions and I am able to add and delete any partition I like. Recently I shrink Mojave partition to create Sonoma partition. It is long duration process but success.

If you use an SSD HDD, it won't take long. Unless you are using an older HDD.

[surenmunoo]

1 hour ago, Slice said:

Strange. I have one drive with several partitions and I am able to add and delete any partition I like. Recently I shrink Mojave partition to create Sonoma partition. It is long duration process but success.

If you try to delete the original partition, it won't let you do that in Mac. You will be able to delete any partition that is secondary to the original. As you see from below examples that when I highlight the original partition, Sonoma or Ventura, the minus(-) is greyed out so not able to but if I select any secondary partition I am able to delete it via the minus button

Edited August 6, 2023 by surenmunoo

[Slice]

I also want to remind that if originally drive was partitionned by Windows 10 to GPT then you can't repartition it in macOS.

macOS GPT is not same as Windows GPT. Once I have to entirely reformat disk with losing windows.

[Matgen84]

Hi all

Z390 config: Install Sonoma Dev Beta 4 successfully on a specific hard drive (Clover 5154 last commit). Fenvi FV-T919 (Wifi not working, BT OK), Intel 9560 ac (Wifi working using Airportitwlm for Sonoma Preview 04 despite country code issue, BT deactivated) 😊

Edited August 6, 2023 by Matgen84

[mek21]

8 hours ago, Slice said:

Strange. I have one drive with several partitions and I am able to add and delete any partition I like. Recently I shrink Mojave partition to create Sonoma partition. It is long duration process but success.

Depending on the speed of your hardware, rather than taking hours to shrink a partition and create another with disk utility, it is a lot quicker to first use disk utility to back up to a bootable SD card or portable hard dirve.  Boot to linux (gparted on USB) and create the desired (smaller) partition(s) in HFS+.  Then use disk utility to convert to APFS and restore to the smaller partition. 

Edited August 6, 2023 by mek21

[CloverLeaf]

Today I fully tested the HDMI functionality on my laptop and everything works great. Unlike Ventura, Sonoma detects and outputs to external monitor after sleep and (re)boot without the need of unplug/plugin again. I am able to get 4K@30Hz, 2K@60Hz and 1080@120Hz. Audio through HDMI works. Dell WD19S works and can hook external monitors both through HDMI and DP. I am happy

 

 

Here's my DP section if anyone is interested:

 

 

Edited August 7, 2023 by CloverLeaf

[hiphopboy]

11 hours ago, CloverLeaf said:

Today I fully tested the HDMI functionality on my laptop and everything works great. Unlike Ventura, Sonoma detects and outputs to external monitor after sleep and (re)boot without the need of unplug/plugin again. I am able to get 4K@30Hz, 2K@60Hz and 1080@120Hz. Audio through HDMI works. Dell WD19S works and can hook external monitors both through HDMI and DP. I am happy

 

 

Here's my DP section if anyone is interested:

 

 

 

must add the enable-hdmi20 to hdmi port working ?

[Stefanalmare]

12 hours ago, CloverLeaf said:

Today I fully tested the HDMI functionality on my laptop and everything works great. Unlike Ventura, Sonoma detects and outputs to external monitor after sleep and (re)boot without the need of unplug/plugin again. I am able to get 4K@30Hz, 2K@60Hz and 1080@120Hz. Audio through HDMI works. Dell WD19S works and can hook external monitors both through HDMI and DP. I am happy

 

 

Here's my DP section if anyone is interested:

 

 

 

Please give me this config in editable format. Thank you!

[CloverLeaf]

1 hour ago, hiphopboy said:

 

must add the enable-hdmi20 to hdmi port working ?

 

I need this particular DP only to be able to output 4K. Not needed for lower resolutions.

 

 

1 hour ago, Stefanalmare said:

 

Please give me this config in editable format. Thank you!

 

 

Sure. Here's my config.plist

 

 

config.plist

[miliuco]

Deleted. Moved to Sonoma post install forum.

@aniuks27 @Naki go there, thanks.

Edited August 7, 2023 by miliuco

[aniuks27]

3 minutes ago, miliuco said:

Good afternoon. 

Sonoma beta 4 + OpenCore 0.9.4.

Every time I open Music app, it remains opened for a few seconds and suddenly closes, giving an error message that I can't interpret. The crash is always in this thread:

  Reveal hidden contents

Thread 11 Crashed::  Dispatch queue: com.apple.FigASMF.InstanceManagement
0   CoreKE                        	       0x2e1472a70 0x2e0ff7000 + 4700784
1   CoreKE                        	       0x2e1246ebe 0x2e0ff7000 + 2424510
2   CoreKE                        	       0x2e147b098 IWvA5fm4IwMS88oQXDANCS + 1192
3   MediaToolbox                  	    0x7ff81f2dafbf 0x7ff81e6a0000 + 12824511
4   MediaToolbox                  	    0x7ff81f2d7550 0x7ff81e6a0000 + 12809552
5   MediaToolbox                  	    0x7ff81f13357f 0x7ff81e6a0000 + 11089279
6   MediaToolbox                  	    0x7ff81f133a08 0x7ff81e6a0000 + 11090440
7   libdispatch.dylib             	    0x7ff80ea7559a _dispatch_client_callout + 8
8   libdispatch.dylib             	    0x7ff80ea82447 _dispatch_lane_barrier_sync_invoke_and_complete + 60
9   MediaToolbox                  	    0x7ff81f1326d7 0x7ff81e6a0000 + 11085527
10  MediaToolbox                  	    0x7ff81f132627 0x7ff81e6a0000 + 11085351
11  MediaToolbox                  	    0x7ff81ef71e51 0x7ff81e6a0000 + 9248337
12  libdispatch.dylib             	    0x7ff80ea7559a _dispatch_client_callout + 8
13  libdispatch.dylib             	    0x7ff80ea7b668 _dispatch_lane_serial_drain + 816
14  libdispatch.dylib             	    0x7ff80ea7c100 _dispatch_lane_invoke + 377
15  libdispatch.dylib             	    0x7ff80ea85aee _dispatch_root_queue_drain_deferred_wlh + 271
16  libdispatch.dylib             	    0x7ff80ea853fd _dispatch_workloop_worker_thread + 451
17  libsystem_pthread.dylib       	    0x7ff80ec19c47 _pthread_wqthread + 327
18  libsystem_pthread.dylib       	    0x7ff80ec18b97 start_wqthread + 15

 

The crash happens with 3 different settings:

1. OpenCore without Sonoma wifi patch, SecureBootModel not disabled and csrutil enabled
2. 1 + OCLP patch for Sonoma wifi with AMFI disabled (amfi=0x80)
3. 1 + OCLP patch for Sonoma wifi with AMFI enabled (AMFIPass.kext).

Does it happens to any one else? I can't find references to this crash in the OCLP issues or PRs.

Same here, however I have not tried with AMFI enabled. Btw both Music and AppleTV crash seconds after the launch. Will test with AMFIPass.kext...

[Stefanalmare]

 

Seeing that some users with z390 have problems, I have installed Sonoma in my z390 Aorus Master. All is working. All what I have done is to adapt EFI to OCLP. All is in this thread. If i can help, please tell me.

 

 

Spoiler

 

Edited August 7, 2023 by Stefanalmare

[eSaF]

@Stefanalmare Is your Apple TV App working?

[Stefanalmare]

@eSaF I don't have Apple TV in my country. I can't check.

[miliuco]

@eSaF But he has Music app running, this makes a big difference.

 

I'm pretty sure that my EFI is right following OCLP guidelines but are you so kind to let me see your config.plist, @Stefanalmare? The one of the Z390 with Music app working.  Thanks.

[Stefanalmare]

12 minutes ago, miliuco said:

@eSaF But he has Music app running, this makes a big difference.

 

I'm pretty sure that my EFI is right following OCLP guidelines but are you so kind to let me see your config.plist, @Stefanalmare? The one of the Z390 with Music app working.  Thanks.

 

Here you have:

config.plist

[CloverLeaf]

I found something really annoying related to AppleTV. While using and after closing the app my GPU spikes at 100% core clock. Nothing really helps but restart. I was trying to find the process behind this heavy load but couldn't see anything in Activity monitor or top command in Terminal. I remember this problem before in Monterey but cannot remember what did I do to fix it. Does anybody experience the same problem ?

Music app works without problems.

 

 

 

 

Edited August 7, 2023 by CloverLeaf

[PoMpIs]

45 minutes ago, eSaF said:

@Stefanalmare Is your Apple TV App working?

 

15 minutes ago, miliuco said:

@eSaF But he has Music app running, this makes a big difference.

 

I'm pretty sure that my EFI is right following OCLP guidelines but are you so kind to let me see your config.plist, @Stefanalmare? The one of the Z390 with Music app working.  Thanks.

 

 

Guys.. Since I updated to the last beta 4, I have lost the DRM in safari, AppleTV and the Amazon prime video app... and I don't have the system patched with OCLP...

The Music APP also crashes... Apple TV the same, and the Amazon Prime Video app also

 

Translated Report (Full Report Below)
-------------------------------------

Process:               Prime Video [1003]
Path:                  /Applications/Prime Video.app/Contents/MacOS/Prime Video
Identifier:            com.amazon.aiv.AIVApp
Version:               10.2 (10.20.15)
App Item ID:           545519333
App External ID:       858855595
Code Type:             X86-64 (Native)
Parent Process:        launchd [1]
User ID:               501

Date/Time:             2023-08-08 00:09:32.7047 +0200
OS Version:            macOS 14.0 (23A5301h)
Report Version:        12
Anonymous UUID:        F0906366-4E56-259A-5B44-4285C49D3DB6


Time Awake Since Boot: 370 seconds

System Integrity Protection: enabled

Crashed Thread:        48  com.apple.coremedia.rootQueue.47  Dispatch queue: com.apple.FigASMF.InstanceManagement

Exception Type:        EXC_BAD_INSTRUCTION (SIGILL)
Exception Codes:       0x0000000000000001, 0x0000000000000000

 

Although videoproc does work for me...

 

 

Until beta 3 everything worked perfectly... and I think in the first beta 4 too 🤷‍♂️ 

 

Poor hackintosh... apple is going to leave us with nothing, the base system and nothing else 😅

[FirstTimeCustomac]

For me, any configuration, whether it's iMP1,1, MP7,1, or override command that uses AMD GPU for playing DRM contents will immediately crash the TV app and Apple Music app when attempting to play the DRM content. On iMac19,1 with no override command in place, TV app or Apple Music app works fine but then no DRM contents are playable with iGPU. I think I've seen couple of posts mentioning that this also happens on iMacPro 2017.

[FirstTimeCustomac]

49 minutes ago, PoMpIs said:

Until beta 3 everything worked perfectly... and I think in the first beta 4 too 🤷‍♂️ 

 

Thanks, I'll try testing 23A5286i build while it's still available.

[FirstTimeCustomac]

OK, no luck with 23A5301g Beta 4 V1.  With beta 3 not being available for download now, I've tried 23A5286i public beta 1 and there is no issue with playing DRM contents on TV app.

[Blesh]

Updating OpenCore with OCAT after having patched with OCLP wouldn't cause any issue, right?

[surenmunoo]

Guys, How do I get my processor to show up in about this mac