D3v1L Posted June 22, 2023 Share Posted June 22, 2023 (edited) 3 minutes ago, PoMpIs said: Yes, for me with device-id: 43DC and 4464 the system reboots.. With Device-id: 4488, which is BCM4377b, the system boots, but it takes a while to display an image, and then I see this: But it doesn't load the driver......But it is very entertaining to test 😆 This is the code in my SSDT: Method (\_SB.PC00.RP01.PXSX._DSM, 4, NotSerialized) // _DSM: Device-Specific Method { If ((Arg2 == Zero)) { Return (Buffer (One) { 0x03 }) } Return (Package (0x12) { "AAPL,slot-name", Buffer (0x09) { "Built In" }, "name", Buffer (0x29) { "AirPort Extreme Wireless Network Adapter" }, "model", Buffer (0x71) { "AirPort Extreme Wireless Network Adapter (Broadcom BCM4377b 802.11ac Gigabit WiFi Adapter| MIMO 3x3 | 1300 MB/s)" }, "device_type", Buffer (0x13) { "Network Controller" }, "subsystem-id", Buffer (0x04) { 0xBF, 0x07, 0x00, 0x00 }, "subsystem-vendor-id", Buffer (0x04) { 0x6B, 0x10, 0x00, 0x00 }, "device-id", Buffer (0x04) { 0x88, 0x44, 0x00, 0x00 }, "vendor-id", Buffer (0x04) { 0xE4, 0x14, 0x00, 0x00 }, "compatible", Buffer (0x0D) { "pci14e4,4488" } }) } Problem is smbios i think...MacBookAir9,1 is only that have this card...maybe they expect this model... Didn't know...too late and too tired 😅😅 Edited June 22, 2023 by D3v1L 2 Link to comment Share on other sites More sharing options...
cankiulascmnfye Posted June 22, 2023 Share Posted June 22, 2023 (edited) I can install Sonoma beta 2 OTA update on my iMac20,2 although I haven't registered a Developer Account Edited June 22, 2023 by cankiulascmnfye 2 Link to comment Share on other sites More sharing options...
Max.1974 Posted June 22, 2023 Share Posted June 22, 2023 36 minutes ago, PoMpIs said: Yes, for me with device-id: 43DC and 4464 the system reboots.. With Device-id: 4488, which is BCM4377b, the system boots, but it takes a while to display an image, and then I see this: But it doesn't load the driver......But it is very entertaining to test 😆 This is the code in my SSDT: Method (\_SB.PC00.RP01.PXSX._DSM, 4, NotSerialized) // _DSM: Device-Specific Method { If ((Arg2 == Zero)) { Return (Buffer (One) { 0x03 }) } Return (Package (0x12) { "AAPL,slot-name", Buffer (0x09) { "Built In" }, "name", Buffer (0x29) { "AirPort Extreme Wireless Network Adapter" }, "model", Buffer (0x71) { "AirPort Extreme Wireless Network Adapter (Broadcom BCM4377b 802.11ac Gigabit WiFi Adapter| MIMO 3x3 | 1300 MB/s)" }, "device_type", Buffer (0x13) { "Network Controller" }, "subsystem-id", Buffer (0x04) { 0xBF, 0x07, 0x00, 0x00 }, "subsystem-vendor-id", Buffer (0x04) { 0x6B, 0x10, 0x00, 0x00 }, "device-id", Buffer (0x04) { 0x88, 0x44, 0x00, 0x00 }, "vendor-id", Buffer (0x04) { 0xE4, 0x14, 0x00, 0x00 }, "compatible", Buffer (0x0D) { "pci14e4,4488" } }) } It's possible you do me a great favor for test? I have a real MacBookAir9,1, and if is possible for you make a SSDT separate to try use on my desktop. I can try boot with SMBIOS from MBA 9,1. 33 minutes ago, D3v1L said: Problem is smbios i think...MacBookAir9,1 is only that have this card...maybe they expect this model... Didn't know...too late and too tired 😅😅 Thanks for information!!! BTW my Lenovo E470 ThinPad smooth working fast and fine with Sonoma beta 2. Better than Ventura. Link to comment Share on other sites More sharing options...
Irish_Man Posted June 22, 2023 Share Posted June 22, 2023 (edited) All good, no issues during the update. Edited June 22, 2023 by Irish_Man 5 Link to comment Share on other sites More sharing options...
hiphopboy Posted June 22, 2023 Share Posted June 22, 2023 12 minutes ago, Irish_Man said: All good, no issues during the update. the build after update is : 23A5276g Link to comment Share on other sites More sharing options...
aben Posted June 22, 2023 Share Posted June 22, 2023 41 minutes ago, cankiulascmnfye said: I can install Sonoma beta 2 OTA update on my iMac20,2 although I haven't registered a Developer Account FYI: Apple no longer limits access to Developer Beta OTAs exclusively for accounts enrolled in Apple Developer Program (99 USD per membership); meaning any active Apple ID now have access to both Public Beta AND Developer Beta for free (post agreement to Apple's ToS on Apple Beta Software Program, of course). Apple officially announced this change sometime during WWDC week, more details here: https://developer.apple.com/support/compare-memberships/ Spoiler 3 Link to comment Share on other sites More sharing options...
eSaF Posted June 22, 2023 Share Posted June 22, 2023 1 hour ago, hiphopboy said: the build after update is : 23A5276g You are correct he has 'q' which is the first Beta. 1 1 Link to comment Share on other sites More sharing options...
Irish_Man Posted June 22, 2023 Share Posted June 22, 2023 (edited) 34 minutes ago, eSaF said: You are correct he has 'q' which is the first Beta. My apologies guys The image has been replaced Edited June 22, 2023 by Irish_Man 2 Link to comment Share on other sites More sharing options...
cankiulascmnfye Posted June 22, 2023 Share Posted June 22, 2023 26 minutes ago, aben said: FYI: Apple no longer limits access to Developer Beta OTAs exclusively for accounts enrolled in Apple Developer Program (99 USD per membership); meaning any active Apple ID now have access to both Public Beta AND Developer Beta for free (post agreement to Apple's ToS on Apple Beta Software Program, of course). Apple officially announced this change sometime during WWDC week, more details here: https://developer.apple.com/support/compare-memberships/ Reveal hidden contents Okay. But I am not logged in with my Apple ID and I didn't register the machine for Apple Beta stuff – at least not recently and not for Sonoma. Maybe it's hadled via the MAC-Address then. Link to comment Share on other sites More sharing options...
Takiller Posted June 22, 2023 Share Posted June 22, 2023 Is it only me, or Intel bluetooth has been taken away on beta 2? Link to comment Share on other sites More sharing options...
miliuco Posted June 22, 2023 Share Posted June 22, 2023 (edited) Good afternoon. Beta2: unable to see it in Software Update, tried changing SMBIOS and SecureBootModel, enabling gatekeeper... Updated by downloading the whole installer package. Afaik, all is working fine, no clock issue (ofc no wifi). Days ago I think someone posted the device ids of the soldered Broadcom wifi present in the Sonoma supported Macs. But I can't find it. Anyone can post them again? Thanks. EDIT: found in a post by @acquarius13. Edited June 22, 2023 by miliuco Link to comment Share on other sites More sharing options...
surenmunoo Posted June 22, 2023 Share Posted June 22, 2023 48 minutes ago, Takiller said: Is it only me, or Intel bluetooth has been taken away on beta 2? BT works on my Fenvi T919 just no wifi since beta 1. For Intel you need to use Heliport and the itlwm.kext for wifi but it loads it has Ethernet 2 Link to comment Share on other sites More sharing options...
matxpa Posted June 22, 2023 Share Posted June 22, 2023 (edited) Hi ASUS X75VB Ivy Bridge (i5-3340M), from Sonoma 14.0 beta1 (23A5257q) to Sonoma 14.0 beta2 (23A5276g) with MBP15,2 SmBios, with Wifi USB Key and Bluetooth but without acceleration. Spoiler And today, 20230725, on Asus X75VB Ivy Bridge i5-3340M HD 4000 OpenCore-0.9.4-20230725-d74d43b-RELEASE OCLP 0.6.8NB-20230724-16h53-20d04d3 and Ivy Bridge graphic patch + Wifi BCM94360 (but BlueTooth BCM20702A0 lost Spoiler Regards Edited July 25, 2023 by matxpa Link to comment Share on other sites More sharing options...
PMheart Posted June 22, 2023 Share Posted June 22, 2023 18 hours ago, meg2014 said: Well, for me Sonoma Beta 2 installed just fine. But for me there were two issues: one was Wifi, of course, and the other was my Aquantia 10Gb NIC. A thought about Wifi: Now that Wifi is still dead, we can be sure that the removal of the Broadcom drivers was not an oversight. What that means, as best I can deduce, is that for Wifi, if there is a fix, it's going to be something like somebody comes up with a driver or a kext or something like an OC hack of some sort. Maybe the Chinese can come up with a card or some hardware add-on that will work, but that seems less and less likely. However, if drivers can be written for Intel Wireless, why not for older Broadcom wireless devices? The other issue is for the Aquantia 10 Gb NIC. It needs a new patch. That patch can be found on the Marvell (Aquantia) 10 Gb Ethernet support thread (towards the end of the postings). For me, once the patch was applied, my Aquantia started working again. I have fixed ForceAquantiaEthernet quirk on OC master. Credit goes to @Shikumo. 12 1 Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 22, 2023 Share Posted June 22, 2023 6 hours ago, PoMpIs said: Yes, for me with device-id: 43DC and 4464 the system reboots.. With Device-id: 4488, which is BCM4377b, the system boots, but it takes a while to display an image, and then I see this: But it doesn't load the driver......But it is very entertaining to test 😆 This is the code in my SSDT: Whit this SSDT on my rig when Sonoma loads for a second I see WiFi looking for signal and then it goes down. I'm using 4464 Device ID. IMG_0023.MOV 4 1 Link to comment Share on other sites More sharing options...
SavageAUS Posted June 22, 2023 Share Posted June 22, 2023 Could you share your EFI, i have almost the same setup, thanks.After work I can post it here. Sent from my iPhone using Tapatalk 1 Link to comment Share on other sites More sharing options...
Wayang-NT Posted June 22, 2023 Share Posted June 22, 2023 drama continues ... after adding RestrictEvents.kext and bootargs sbvmm, can get update ... 3 1 Link to comment Share on other sites More sharing options...
AlfredoM Posted June 22, 2023 Share Posted June 22, 2023 Hello friends I have a problem but ONLY in Sonoma Beta1 and Beta2 with the "FL1100 USB 3.0 Host Controller". Apparently not supported. This controller is on my MSI B250 Mortal Motherboard. In Ventura and Monterey, the device works perfectly. I'll try to explain the symptoms. So if I plug a USB device into one of the USB ports, it is also displayed in the Hackintoshtool and in the system properties under USB. I think it's connected then. BUT I can't see the USB device in Finder, Disk Utility or anywhere else. What can be the cause? Before there are any questions about kextes such as USBInjectall and USPORT or USBMap, I only have the USBinjectall.kext active in Ventura and Monterey etc. and all available USB2 and USB3 ports work. Thanks for help tips on this. 1 Link to comment Share on other sites More sharing options...
Max.1974 Posted June 22, 2023 Share Posted June 22, 2023 Im quick Decide buy a MACPRO HACK 5 1 Link to comment Share on other sites More sharing options...
BALDY_MAN Posted June 23, 2023 Share Posted June 23, 2023 @Max.1974 Great Minds think alike I jus got one too Z97 Hack 4 1 Link to comment Share on other sites More sharing options...
Middleman Posted June 23, 2023 Share Posted June 23, 2023 So I've been at this for the past week or so on two of my systems (10900K w/ Z490 Aorus Ultra and Coffee Lake Acer Nitro 5). For whatever reason, Sonoma just refuses to boot with OC 0.9.3 despite Ventura working fine on both. Not quite sure what the issue is since everything kext-wise has been fully updated on both EFIs. 1 Link to comment Share on other sites More sharing options...
SavageAUS Posted June 23, 2023 Share Posted June 23, 2023 20 hours ago, pajdek said: Could you share your EFI, i have almost the same setup, thanks. Attached my EFI minus serial. EFI.zip 1 Link to comment Share on other sites More sharing options...
pajdek Posted June 23, 2023 Share Posted June 23, 2023 32 minutes ago, SavageAUS said: Attached my EFI minus serial. EFI.zip 6.91 MB · 1 download Many thanks Link to comment Share on other sites More sharing options...
Slice Posted June 23, 2023 Share Posted June 23, 2023 22 hours ago, miliuco said: Good afternoon. Beta2: unable to see it in Software Update, tried changing SMBIOS and SecureBootModel, enabling gatekeeper... Updated by downloading the whole installer package. Afaik, all is working fine, no clock issue (ofc no wifi). Days ago I think someone posted the device ids of the soldered Broadcom wifi present in the Sonoma supported Macs. But I can't find it. Anyone can post them again? Thanks. EDIT: found in a post by @acquarius13. I have the update with Clover 5152 7 2 Link to comment Share on other sites More sharing options...
Rocky12 Posted June 23, 2023 Share Posted June 23, 2023 (edited) some of the device ids which i found With regards to the wireless chipsets fitted to Intel Mac platforms supported by Sonoma, it's as follows: 2018 Mac mini8,1 -> BCM4364 (pci14e4,4464) 2018/2019 MacBookAir8,x -> BCM4355 (pci14e4,43dc) 2020 MacBookAir9,1 -> BCM4377b (pci14e4,4488) 2018/2019 MacBookPro15,x -> BCM4364 (pci14e4,4464) 2019/2020 MacBookPro16,x -> BCM4364 (pci14e4,4464) 2019 iMac19,x -> BCM4364 (pci14e4,4464) 2020 iMac20,x -> BCM4364 (pci14e4,4464) 2017 iMacPro1,1 -> BCM4355 (pci14e4,43dc) 2019 MacPro7,1 -> BCM4364 (pci14e4,4464) AppleBCMWLANBusInterfacePCIeMac.kext Edited June 23, 2023 by Rocky12 7 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts