MorenoAv Posted June 13, 2023 Share Posted June 13, 2023 Good afternoon Guys, Last night I was able to finally install macOS Sonoma, but is was until the first reboot after transferring the EFI from my usb installer, after that no matter what I do I can't boot again... This are the last logs, someone more knowable than me can help me? Thanks Spoiler 1 Link to comment Share on other sites More sharing options...
Max.1974 Posted June 13, 2023 Share Posted June 13, 2023 17 hours ago, DrThodt said: does continuity work and stable? what wifi card? Im using onboard factory from my MB Aorus Z790 Elite AX This card is intel and works on VENTURA (not in Sonoma yet) and developer was work on project OpenIntelWireless from GitHub. My Card is ax211 Hope help you!! Thanks Gigabyte too!! Spoiler 3 Link to comment Share on other sites More sharing options...
Max.1974 Posted June 13, 2023 Share Posted June 13, 2023 1 hour ago, MorenoAv said: Good afternoon Guys, Last night I was able to finally install macOS Sonoma, but is was until the first reboot after transferring the EFI from my usb installer, after that no matter what I do I can't boot again... This are the last logs, someone more knowable than me can help me? Thanks Hide contents Hi my friend, are you using -lilubeta -alcbeta -revbeta -wegbeta on boot-args? 1 Link to comment Share on other sites More sharing options...
Max.1974 Posted June 13, 2023 Share Posted June 13, 2023 14 hours ago, jsl2000 said: Thanks for the newest BlueToolFix.kext which works at Sonoma now ! Hi my friends, only Intel Bluetooth is working on Sonoma with BlueToolFix.kext, or AirportItlwm.kext works fine too? What Kexts version you are using? Im ask because only with Heliport works wireless on Sonoma, and not works Airdrop that im need for my work. Great news!!! Link to comment Share on other sites More sharing options...
b0ltun Posted June 13, 2023 Share Posted June 13, 2023 4 hours ago, Max.1974 said: AirportItlwm.kext works fine too Won't work Link to comment Share on other sites More sharing options...
surenmunoo Posted June 13, 2023 Share Posted June 13, 2023 On 6/13/2023 at 1:17 AM, Moviemakergr said: If anyone has a problem on Sonoma with the time zone, like I had, here is the solution. https://macosx-faq.com/how-to-change-date-time-terminal/ Dat/Time works but cannot set my time zone, Apparently New Zealand is not a timezone 🤪 Link to comment Share on other sites More sharing options...
mick3lson Posted June 13, 2023 Share Posted June 13, 2023 3 hours ago, Max.1974 said: Im using onboard factory from my MB Aorus Z790 Elite AX I have the same hardware config except the wifi card. I just updated to Sonoma, all work well with only little issue, the boot picker loads as expected, but when I try to move the cursor is locked. I have a logitech marathon mouse with usb port mapped and picker attributes 17 on default theme. Your mouse works? Link to comment Share on other sites More sharing options...
STLVNUB Posted June 13, 2023 Share Posted June 13, 2023 20 minutes ago, b0ltun said: Won't work The Ventura Itlwm.kext And Heliport.app Work Great! 3 Link to comment Share on other sites More sharing options...
b0ltun Posted June 13, 2023 Share Posted June 13, 2023 (edited) 11 minutes ago, STLVNUB said: The Ventura Itlwm.kext And Heliport.app Work Great! I know, it's already has been discussed nearly on every page of that thread The question was about AirportItlwm.kext Edited June 13, 2023 by b0ltun Link to comment Share on other sites More sharing options...
prud28 Posted June 13, 2023 Share Posted June 13, 2023 how to replace IOAcceleratorFamily2.kext? Link to comment Share on other sites More sharing options...
maly70 Posted June 13, 2023 Share Posted June 13, 2023 Dear Mates, AirportItlwm.kext not working for now for intel wifi cards but, itlwm V 220 with Heliport is working good, everyone who has intel cards should use ITLWM with Heliport, til Sonoma drivers are out Thank you for your patience 6 hours ago, MorenoAv said: Good afternoon Guys, Last night I was able to finally install macOS Sonoma, but is was until the first reboot after transferring the EFI from my usb installer, after that no matter what I do I can't boot again... This are the last logs, someone more knowable than me can help me? Thanks Reveal hidden contents you need to reconfigure kext files and drivers to your new EFI partition and new HD Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 13, 2023 Share Posted June 13, 2023 1 hour ago, prud28 said: how to replace IOAcceleratorFamily2.kext? That's a million dollar question! 3 Link to comment Share on other sites More sharing options...
erice Posted June 13, 2023 Share Posted June 13, 2023 Greetings. I would be very happy if someone would kindly give me some suggestions to enable Standby mode (formerly Stop) in Sonoma Beta on: - Asus Prime Z490-P board - Radeon RX 580 graphics card - i7-10700K@3.80 CPU - SMBIOS iMac 20.1 - Opencore 0.9.3. Almost everything seems to work (except WiFi, of course), but no sleep. Thanks in advance. my config.plist 1 Link to comment Share on other sites More sharing options...
Max.1974 Posted June 13, 2023 Share Posted June 13, 2023 2 hours ago, mick3lson said: I have the same hardware config except the wifi card. I just updated to Sonoma, all work well with only little issue, the boot picker loads as expected, but when I try to move the cursor is locked. I have a logitech marathon mouse with usb port mapped and picker attributes 17 on default theme. Your mouse works? Yes. My mouse was Apple Magic Mouse. Maybe you should try 255 picker atributes. But im not sure. Mine is 255. Are you update Opencore to 0.9.3? 3 Link to comment Share on other sites More sharing options...
Alex HQuest Posted June 13, 2023 Share Posted June 13, 2023 On 6/5/2023 at 7:32 PM, PoMpIs said: What type of wiffi do Sonoma supported macs use??? Because as much as I look there is nothing of Broadcom in Sonoma 😔 I am not sure if someone already responded, but while at the Apple Store (and I’m still here typing this), here is what I found: new MacBook Air 15” (M2) uses a Broadcom 0x4387 the MacBook Air 13” (M1) uses a Broadcom 0x4378 the MacBook Pro 16” (M2 Pro) uses a Broadcom 0x4388 the Mac Studio 2023 (M2 Max) uses a Broadcom 0x4388 the Mac mini 2023 (M2) uses a Broadcom 0x4388 Broadcom VID is 0x14E4, so not sure Broadcom is “dead” per se. 2 3 Link to comment Share on other sites More sharing options...
Max.1974 Posted June 13, 2023 Share Posted June 13, 2023 (edited) 1 hour ago, erice said: Greetings. I would be very happy if someone would kindly give me some suggestions to enable Standby mode (formerly Stop) in Sonoma Beta on: - Asus Prime Z490-P board - Radeon RX 580 graphics card - i7-10700K@3.80 CPU - SMBIOS iMac 20.1 - Opencore 0.9.3. Almost everything seems to work (except WiFi, of course), but no sleep. Thanks in advance. my config.plist 43.05 kB · 2 downloads Are you using SSDT fix for power / sleep and you check with Hackintool ? If is possible, try verify your SSDT or DSDT https://dortania.github.io/OpenCore-Post-Install/usb/misc/instant-wake.html OC MANUAL CONFIGURATION POWER SETTINGS USB Fix on Terminal sudo pmset autopoweroff 0 sudo pmset powernap 0 sudo pmset standby 0 sudo pmset proximitywake 0 sudo pmset sleep 0 sudo pmset destroyfvkeyonstandby 1 sudo pmset disksleep 1 sudo pmset -a powerbutton 1 OTHERS sudo pmset -a hibernatemode 0 sudo pmset -a standby 1 sudo pmset -a standbydelaylow 1 sudo pmset -a standbydelayhigh 1 OR Sleep Off: sudo pmset -a sleep 0; sudo pmset -a hibernatemode 0; sudo pmset -a disablesleep 1 Sleep on: sudo pmset -a sleep 1; sudo pmset -a hibernatemode 0; sudo pmset -a disablesleep 0 (** Mine). Edited June 13, 2023 by Max.1974 1 1 Link to comment Share on other sites More sharing options...
Max.1974 Posted June 13, 2023 Share Posted June 13, 2023 3 hours ago, b0ltun said: Won't work To me works fine intel with Ventura, Airdrop included. Not work with Sonoma, but, if not use Airdrop, can use itlwm.kext with Heliport, and works fine. Project is here: https://github.com/OpenIntelWireless/IntelBluetoothFirmware https://github.com/OpenIntelWireless Discussion here: https://github.com/OpenIntelWireless/IntelBluetoothFirmware/issues/437 3 Link to comment Share on other sites More sharing options...
ameenjuz Posted June 13, 2023 Share Posted June 13, 2023 37 minutes ago, Max.1974 said: To me works fine intel with Ventura, Airdrop included. Not work with Sonoma, but, if not use Airdrop, can use itlwm.kext with Heliport, and works fine. Project is here: https://github.com/OpenIntelWireless/IntelBluetoothFirmware https://github.com/OpenIntelWireless Discussion here: https://github.com/OpenIntelWireless/IntelBluetoothFirmware/issues/437 I have intel wifi card ax201 working fine on Ventura but Airdrop do not work how did you get airdrop working on Intel wifi chipset? 1 Link to comment Share on other sites More sharing options...
SavageAUS Posted June 13, 2023 Share Posted June 13, 2023 I am not sure if someone already responded, but while at the Apple Store (and I’m still here typing this), here is what I found: new MacBook Air 15” (M2) uses a Broadcom 0x4387 the MacBook Air 13” (M1) uses a Broadcom 0x4378 the MacBook Pro 16” (M2 Pro) uses a Broadcom 0x4388 the Mac Studio 2023 (M2 Max) uses a Broadcom 0x4388 the Mac mini 2023 (M2) uses a Broadcom 0x4388 Broadcom VID is 0x14E4, so not sure Broadcom is “dead” per se.Hopefully this information helps either OCLP or the dortania devs to come up with something for us. Sent from my iPhone using Tapatalk 3 Link to comment Share on other sites More sharing options...
AlfredoM Posted June 14, 2023 Share Posted June 14, 2023 (edited) Does anyone have a tip for NvME SSD? I have the latest NVME Fix-kext in OC but none of my 2 NVME SSD is displayed, neither in Disk Utility nor in the Finder. I currently have Sonoma Beta1 installed on a regular SSD. UPDATE: I ran out of free partitions on the EVO970 NvME and had Somona installed on a Sandisk 480GB Sata3 SSD. I didn't see the 2 NvME (one for macOS and the other, each 1TB, for Win). were visible and also not in the system information under NvME Express. You can only see the current Samsung EVO 970, which also has the other macOS systems on it. And a normal 1TB Crucia SSD is also missing. It is also not visible in the system information under Sata. Same as the other Sandisk 480GB Sata3 SSD, I can't see it either. With Ventura 13.4 and 13.5-Beta2 everything is ok, all NvME and SSD are there. Why is it ? Does anyone have any tips for help? Edited June 14, 2023 by AlfredoM 1 1 Link to comment Share on other sites More sharing options...
prud28 Posted June 14, 2023 Share Posted June 14, 2023 (edited) 7 hours ago, Cyberdevs said: This is the million dollar question! I tried disabling IIOAcceleratorFamily2.kext in config.plist and adding another one in LE. But it doesn't work. Edited June 14, 2023 by prud28 1 Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 14, 2023 Share Posted June 14, 2023 4 hours ago, prud28 said: I tried disabling IIOAcceleratorFamily2.kext in config.plist and adding another one in LE. But it doesn't work. In theory that's how you're suppose to do it. You might also need to find which other kexts IIOAcceleratorFamily2.kext depends on (dependencies) and block them as well then you can force the older version of those kexts to load. 1 Link to comment Share on other sites More sharing options...
prud28 Posted June 14, 2023 Share Posted June 14, 2023 (edited) 1 hour ago, Cyberdevs said: In theory that's how you're suppose to do it. You might also need to find which other kexts IIOAcceleratorFamily2.kext depends on (dependencies) and block them as well then you can force the older version of those kexts to load. The matter is that this kext is not blocked through config.plist. Maybe I spelled it wrong? Information taken here https://github.com/dortania/OpenCore-Legacy-Patcher/issues/1076 Or maybe another csr-active-config is needed? FF0F0000 Though OCLP works with it. Edited June 14, 2023 by prud28 1 Link to comment Share on other sites More sharing options...
cankiulascmnfye Posted June 14, 2023 Share Posted June 14, 2023 (edited) @prud28 OpenCore provides two methods (or "strategies") to block kexts: Disable and Exclude. Did you try both? This is unrelated to csr-active-config I think. 03080000 is sufficient to install Root Patches. But for me this also hasen't worked yet (I was trying to block something else though). Edited June 15, 2023 by cankiulascmnfye 5 Link to comment Share on other sites More sharing options...
prud28 Posted June 14, 2023 Share Posted June 14, 2023 47 minutes ago, cankiulascmnfye said: @prud28 OpenCore provide two methods (or "strategies") to block kexts: Disable and Exclude. Did you try both? This is unrelated to csr-active-config I think. 03080000 is sufficient to install Root Patches. I checked now but it didn't help. 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts