Jump to content

[pre-release] macOS Ventura

fantomas

By fantomas,
in New Releases and Updates

 Share
3,556 posts in this topic

Recommended Posts

Stefanalmare
Stefanalmare
Posted
Posted
13 minutes ago, PoMpIs said:

 

What a strange thing, before you got 3.3Ghz and now 3.8Ghz... in mine the Intel power gadget does not exceed 2.6Ghz... it is strange, because I have done everything that is recommended to make it work step per step and never reaches 3.3Ghz which is its maximum frequency...

I'm going to do other tests xD

thank you very much 👍

It is not unusual. I saw this behaviour in other rigs. The max turbo in Intel Power Gadget vary depends of the load.

  • Thanks 1
Link to comment
Share on other sites
PoMpIs
PoMpIs
Posted
Posted (edited)
39 minutes ago, Stefanalmare said:

It is not unusual. I saw this behaviour in other rigs. The max turbo in Intel Power Gadget vary depends of the load.

 

It's just that I can't think of anything else to do 😆 .... it doesn't charge the turbos in any way, it stays at a maximum of 2.6Ghz and should reach all core at 3.1Ghz and single core 3.3Ghz

 

I found this "failure" in the boot log:

  

2022-10-16 08:56:59.292058-0700  localhost kernel[0]: (AppleACPIPlatform) SSDT 0xFFFFFF906DC6B010 000A01 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
2022-10-16 08:56:59.292061-0700  localhost kernel[0]: (AppleACPIPlatform) SSDT 0xFFFFFF906DC6B010 000A01 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
2022-10-16 08:56:59.292064-0700  localhost kernel[0]: (AppleACPIPlatform) 
2022-10-16 08:56:59.292065-0700  localhost kernel[0]: (AppleACPIPlatform) 
2022-10-16 08:56:59.293990-0700  localhost kernel[0]: (IOgPTPPlugin)   IOTimeSyncTimeSyncTimePort(0x28d2441998e80008): Created general notifier <private> for local clock port <private>
2022-10-16 08:56:59.294041-0700  localhost kernel[0]: (IOTimeSyncFamily)   IOTimeSyncDomain(0x28d2441998e80008): Set lock state to locking.
2022-10-16 08:56:59.294064-0700  localhost kernel[0]: (IOgPTPPlugin)   IOTimeSyncTimeSyncTimePort(0x28d2441998e80008): messagePriorityVector 250, 248, 33, 17258, 239, 0x28d2441998e80008, 0, 0x28d2441998e80008, 0, 0
2022-10-16 08:56:59.294072-0700  localhost kernel[0]: (IOgPTPPlugin)   IOTimeSyncTimeSyncTimePort(0x28d2441998e80008): AnnounceInfo 250, 248, 33, 17258, 239, 0x28d2441998e80008, 0 | 0x0008, 37, 160
2022-10-16 08:56:59.294073-0700  localhost kernel[0]: (IOPlatformPluginFamily) X86PlatformPlugin::publishACPIStates - Failed to get max non-turbo PState. Set max non-turbo PState to default value 1
2022-10-16 08:56:59.294077-0700  localhost kernel[0]: (IOgPTPPlugin)   IOTimeSyncTimeSyncTimePort(0x28d2441998e80008): Set role to Slave.
2022-10-16 08:56:59.294083-0700  localhost kernel[0]: (IOPlatformPluginFamily) X86PlatformPlugin::publishACPIStates - Failed to get max non-turbo PState. Set max non-turbo PState to default value 1
2022-10-16 08:56:59.294091-0700  localhost kernel[0]: (IOTimeSyncFamily)   IOTimeSyncDomain(0x28d2441998e80008): Set lock state to locked.

 

Edited by PoMpIs
Link to comment
Share on other sites
PoMpIs
PoMpIs
Posted
Posted (edited)

@Stefanalmare 

 

I have already discovered the problem, 5T33Z0 XCPM patch was not working ... I don't know why OpenCore Configurator had put "Max Kernel 20.9.9". I have left "Max kernel" blank as you have in your EFI and it already works

 

1058980908_Capturadepantalla2022-10-16alas13_07_09.thumb.png.6c6e7c48fd6b3a5ea4a83540f4efb87e.png

 

1559371201_Capturadepantalla2022-10-16alas13_25_41.thumb.png.29b15e5fd86b30f9cb24dc774f9180c6.png

 

:hyper: 

 

Improve performance a lot managing Ventura 

 

But the strange thing is that it works only with the 5T33Z0 patch, I have not loaded cpufriend or cpufriendataprovider .. and catches all the states of the micro without problems with Smbios Macbookpro10,2 🤷‍♂️

 

1224265353_Capturadepantalla2022-10-16alas13_36_37.thumb.png.06ab24e1a215eb54c209ab275d85b62c.png

 

Thank you very much!!! My Lenovo is Full Working in Ventura 🙇‍♂️

Edited by PoMpIs
  • Like 4
  • Thanks 1
Link to comment
Share on other sites
axonleo
axonleo
Posted
Posted (edited)
2 hours ago, 陈军鹏 said:

log in github

4397DB2D-8100-42B0-A7DA-334917BA6C52.thumb.png.038fa22e52a1e74e812752eb131603b3.png

 

log in github

4397DB2D-8100-42B0-A7DA-334917BA6C52.thumb.png.038fa22e52a1e74e812752eb131603b3.png

 

log in github

4397DB2D-8100-42B0-A7DA-334917BA6C52.thumb.png.038fa22e52a1e74e812752eb131603b3.png

 

log in github

4397DB2D-8100-42B0-A7DA-334917BA6C52.thumb.png.038fa22e52a1e74e812752eb131603b3.png

 

no worries i learned how to compile the file and install it and now i have gpu support yaaayi :D thank you for the correct link man! any idea why i have metal 2 and not 3 btw ?

Next problem is the power management support... any idea on how to fix that ?

Screenshot 2022-10-16 at 14.10.03.png

Edited by axonleo
Link to comment
Share on other sites
Stefanalmare
Stefanalmare
Posted
Posted
8 hours ago, PoMpIs said:

@Stefanalmare 

 

I have already discovered the problem, 5T33Z0 XCPM patch was not working ... I don't know why OpenCore Configurator had put "Max Kernel 20.9.9". I have left "Max kernel" blank as you have in your EFI and it already works

 

1058980908_Capturadepantalla2022-10-16alas13_07_09.thumb.png.6c6e7c48fd6b3a5ea4a83540f4efb87e.png

 

1559371201_Capturadepantalla2022-10-16alas13_25_41.thumb.png.29b15e5fd86b30f9cb24dc774f9180c6.png

 

:hyper: 

 

Improve performance a lot managing Ventura 

 

But the strange thing is that it works only with the 5T33Z0 patch, I have not loaded cpufriend or cpufriendataprovider .. and catches all the states of the micro without problems with Smbios Macbookpro10,2 🤷‍♂️

 

1224265353_Capturadepantalla2022-10-16alas13_36_37.thumb.png.06ab24e1a215eb54c209ab275d85b62c.png

 

Thank you very much!!! My Lenovo is Full Working in Ventura 🙇‍♂️

It is my fault! I forgot to tell you to remove max kernel. But glad for you!

  • Like 3
  • Thanks 1
Link to comment
Share on other sites
RoberT_XeS
RoberT_XeS
Posted
Posted (edited)
12 hours ago, axonleo said:

no worries i learned how to compile the file and install it and now i have gpu support yaaayi :D thank you for the correct link man! any idea why i have metal 2 and not 3 btw ?

Next problem is the power management support... any idea on how to fix that ?

Screenshot 2022-10-16 at 14.10.03.png

 

 

I have got the power management working 

 

I just added the following files.

 

1. Generated SSDT-PM.aml file using SSDTPrgen method

2. Added the following kextsAppleIntelCPUPowerManagementClient.kextAppleIntelCPUPowerManagement.kext and AGPMInjector.kext

3. Done

 

 

image.thumb.png.44110fad8517cd239b9ab46b8310ac69.pngimage.thumb.png.e66ffaee5dcd72e4499d0f74dc5a0b96.png

 

 

 

 

Edited by RoberT_XeS
  • Like 6
  • Thanks 1
Link to comment
Share on other sites
axonleo
axonleo
Posted
Posted
28 minutes ago, RoberT_XeS said:

 

 

I have got the power management working 

 

I just added the following files.

 

1. Generated SSDT-PM.aml file using SSDTPrgen method

2. Added the following kextsAppleIntelCPUPowerManagementClient.kextAppleIntelCPUPowerManagement.kext and AGPMInjector.kext

3. Done

 

 

image.thumb.png.44110fad8517cd239b9ab46b8310ac69.pngimage.thumb.png.e66ffaee5dcd72e4499d0f74dc5a0b96.png

 

 

 

 

i tried the kext but it didnt work, can u check my EFI if there is something missing or some setting that is wrong ?

EFI ventura pm test.zip

Link to comment
Share on other sites
PG7
PG7
Posted
Posted
On 10/12/2022 at 12:55 AM, HyperX7 said:

1617496797_EkranResmi2022-10-1201_53_34.png.2ef1fcd896dabc3526c8a8d2cf6797d5.png

Update went fine. 😎



 

what would the processor be?

could you share the config.plist and photo of the kext and drivers used

I have an HP Laptop with i3-6006u where the first beta versions work, the last ones don't
panic LAPIC and I can't activate the graphics anymore because I have kernel panic when activating!

Link to comment
Share on other sites
miliuco
miliuco
Posted
Posted
4 minutes ago, Stefanalmare said:

Warning! I used the latest OCLP and lost the login screen. Just black. Wait or use it at your on risk. Also in Macrumors some are having problems.

Not tried yet. Do you have AMD GCN? Because the last changes made are for these GPUs. 

Link to comment
Share on other sites
Stefanalmare
Stefanalmare
Posted
Posted (edited)
1 hour ago, RoberT_XeS said:

 

 

I have got the power management working 

 

I just added the following files.

 

1. Generated SSDT-PM.aml file using SSDTPrgen method

2. Added the following kextsAppleIntelCPUPowerManagementClient.kextAppleIntelCPUPowerManagement.kext and AGPMInjector.kext

3. Done

 

 

image.thumb.png.44110fad8517cd239b9ab46b8310ac69.pngimage.thumb.png.e66ffaee5dcd72e4499d0f74dc5a0b96.png

 

 

 

 

I confirm! With AppleIntelCPUPowerManagement.kext, AppleIntelCPUPowerManagementClient.kext and SSDT-PM.aml, XCPM and PowerManagement are working. No need of AppleXcpmExtraMSRS enable or patch added. I have tried with CPUFriend.kext and CPUFriendDataProvider.kext, without SSDT-PM.aml and it doesn't work. Good find @RoberT_XeS! AGPMInjector.kext is needed just if you don't have AGPM enabled by default.

Edited by Stefanalmare
  • Like 4
Link to comment
Share on other sites
PoMpIs
PoMpIs
Posted
Posted
2 hours ago, miliuco said:

Ok. I’ve my iMac 2015 at the Apple service so I can’t try OCLP these days. I haven’t read anything about it in GitHub or Discord yet. But yes on MR.

Have you downgraded to the previous OCLP? Maybe it doesn’t fix it. 

By the way, there is an user named StefanAM 🙂

 

@PoMpIs

Did you read the post by @RoberT_XeS?

https://www.insanelymac.com/forum/topic/351969-pre-release-macos-ventura/?do=findComment&comment=2795307

 

 

When I tried it my lenovo T430 kept rebooting... 🤷‍♂️

 

But I like it better the way I have it with the 5T33Z0 patch... my laptop doesn't need anything else, neither SSDT-PM nor CPUFriend, nothing... just activate the patch and the laptop already has all the energy states active in Ventura .. It works very well 👍

 

 

  • Like 2
Link to comment
Share on other sites
PG7
PG7
Posted
Posted
1 hour ago, PoMpIs said:

 

I don't think so, this laptop is now giving what it gave in older systems with AppleIntelCPUPowerManagement... And I tried that method yesterday and the laptop continuously restarts in a loop 

 

I can't ask for much more from this processor either, it's a two-core i5 3320M with turbo all core at 3.0Ghz and single core 3.3Ghz

 

https://browser.geekbench.com/v5/cpu/18003081

 

Today I generated a MacBookPro 9,2 smbios and it's going really well... Even iStat menus show all sensors and i can control the fan.

 

364928191_Capturadepantalla2022-10-17alas14_20_28.thumb.png.c52286a032d3db70374dedae2ac67f0b.png

 

I really like how it works now with MacOS ventura this old Lenovo 🤭

 

 

 

 

 

 

 

image.thumb.png.4b4315fc62e9e86476692f3020c2727c.png

  • Like 1
  • Thanks 1
Link to comment
Share on other sites
陈军鹏
陈军鹏
Posted
Posted
On 10/17/2022 at 12:02 PM, axonleo said:

no worries i learned how to compile the file and install it and now i have gpu support yaaayi :D thank you for the correct link man! any idea why i have metal 2 and not 3 btw ?

Next problem is the power management support... any idea on how to fix that ?

Screenshot 2022-10-16 at 14.10.03.png

SNB-E needs to add a patch

I can't find this version（7513B9）

You can try extracting AppleIntelCPUPowerManagement from 12.2.1 and modifying it

LH$J6H4X]A(V0JA52M7GY%W.png

Link to comment
Share on other sites
Slice
Slice
Posted
Posted
6 hours ago, miliuco said:

 @Stefanalmare @PoMpIs @RoberT_XeS and people I can't remember now.

 

I think it's a good idea to open a thread for OCLP as @mnfesq says and go there for all things related to OCLP, the first person who posts about it can open a new thread in Developers Corner >> Bootloaders >> OpenCore >> OpenCore Legacy Patcher General Discussion (or OCLP General Discussion, I prefer the long name). What do you think? If this is done, it would be too much work for moderators to move there the last posts with OCLP subject? (sure it is a hard work).

 

@Stefanalmare

Just seen now, sync binaries 2 hours ago. Tell us if you can fix the login screen issue.

 

This is a good idea. I will do this.

Although it names "OpenCore Legacy Patcher" it can be used also for Clover installation. So I will create new thread in "Hackintosh Tools" section.

For some reason posts will be in chronological order so not care about the first post.

  • Like 3
  • Thanks 1
Link to comment
Share on other sites
miliuco
miliuco
Posted
Posted (edited)

Hey all OCLP users. 
Please go to the new thread created by @Slice to follow there with OCLP specific issues or news. 

 

Installing new macOS on unsupported hardware (OCLP patcher and others)

 

It’s at Developers Corner >> Hackintosh Tools.

 

Although I think that Developers Corner >> Bootloaders >> Opencore would be a better place since OCLP (main subject of this thread) is an OC spin-off project. 

Edited by miliuco
  • Like 2
  • Thanks 1
Link to comment
Share on other sites
HyperX7
HyperX7
Posted
Posted
18 hours ago, PG7 said:



 

what would the processor be?

could you share the config.plist and photo of the kext and drivers used

I have an HP Laptop with i3-6006u where the first beta versions work, the last ones don't
panic LAPIC and I can't activate the graphics anymore because I have kernel panic when activating!

Here is my Config file and kexts drive SS. My processor is i5-6200U and it's config code is zero as usual.

2022-10-18_14-59-01.jpg

config.plist

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...