ruslan61 Posted October 14, 2022 Share Posted October 14, 2022 12 hours ago, Stefanalmare said: Ve ışığınız olmayacak çünkü Polaris GPU, ne yaparsanız yapın AVX2'ye ihtiyaç duyar. GPU'yu değiştirin veya HD4000 ile kalın (ancak her güncellemede zorluk yaşarsınız). Buraya bak: "Ventura'da AVX2.0'a dayanan grafik mimarileri: AMD Polaris (RX400/500) AMD Vega (48/56/64/VII) AMD Navi (RX5000/6000)" https://github.com/dortania/OpenCore-Legacy-Patcher/issues/998 Güncelleme! Daha fazlasını okuyarak şunu buldum: https://github.com/dortania/OpenCore-Legacy-Patcher/issues/1008 OCLP, AVX2 işlemcisi yoksa Polaris'i destekler. Ancak OCLP'yi uygularken sorun yaşarsınız, çünkü Polaris ile giriş yapamazsınız ve HD4000 kullanarak yükleseniz bile, OCLP sihrini yapana kadar aynı şekilde çalışmayacaktır. Yalnızca IGPU HD4000'li donanımımda, Ventura'yı kurduğumda veya güncellediğimde eski bir AMD GPU (BIOS'ta CSM'yi geçici olarak etkinleştir) kullanıyorum, oturum aç, OCLP uygula, GPU'yu kaldır (BIOS'ta yalnızca UEFI'yi geri yükle) ve çalışıyor. Peki senin yerine ne yapacağım: 1. Eski bir GPU (NVIDIA, AMD) bulun ve ana gibi kurun. Polaris'inizi başka bir yuvaya koyun. Önyüklemek için BIOS'ta CSM'yi etkinleştirmeniz gerekip gerekmediğine bakın. 2. Ventura'yı kurun ve giriş ekranı için dua edin. 3. OCLP'yi uygulayın. 4. Eski GPU'yu çıkarın (BIOS'ta yalnızca UEFI'yi etkinleştirin) ve ana yuvada Polaris'i değiştirin. Bu noktaya geldiyseniz, gitmekte fayda var. @Stefanalmare I gave you the trouble, I am forever grateful for your support.😔 can you please prepare efi for hd4000🙏 Thanks.. Link to comment Share on other sites More sharing options...
analise Posted October 14, 2022 Share Posted October 14, 2022 3 hours ago, Stefanalmare said: About Ventura, Ivy Bridge, Power Management, XPCM: I made a mistake in the laptop configuration. All Ivy's I own are having XPCM and Power Management working. Don't forget Lilu and WhateverGreen. No didn't work. I have Lily and whatever green kext. Thanks Link to comment Share on other sites More sharing options...
greythorne Posted October 15, 2022 Share Posted October 15, 2022 Just wanna check. Does anyone face issues with Bluetooth? It appears that when my Jabra ear piece cannot receive any sound. I am using a Bluetooth dongle which was working all the while until I updated to Beta 11. The kext BlueToolFixup is also enabled. This Bluetooth dongle do not need kext. Link to comment Share on other sites More sharing options...
陈军鹏 Posted October 15, 2022 Share Posted October 15, 2022 On 10/14/2022 at 3:26 AM, axonleo said: Guys i need help creating opencore efi folder that can boot and install ventura beta 11 ? What kext, smbios and config file do i need to configure for x79 and 3930k cpu ? EFI.zip X79 2690v2 boot-args:-X 1 Link to comment Share on other sites More sharing options...
axonleo Posted October 15, 2022 Share Posted October 15, 2022 4 hours ago, 陈军鹏 said: EFI.zip 6.2 MB · 10 downloads X79 2690v2 boot-args:-X Could you please change the language to english and retake the screenshots also in bigger screen resolution so i can read the text ? I tried to boot with ur efi folder but getting stuck here https://imgur.com/cJBlR8o and even added -x in the boot args and that didnt help ? even tried to select imac pro1.1 but oc configurator is not saving my changes for some reason when selecting smbios... why is that happening ? i have lastest oc configuration 2.62.1.0 Link to comment Share on other sites More sharing options...
陈军鹏 Posted October 15, 2022 Share Posted October 15, 2022 4 hours ago, axonleo said: Could you please change the language to english and retake the screenshots also in bigger screen resolution so i can read the text ? I tried to boot with ur efi folder but getting stuck here https://imgur.com/cJBlR8o and even added -x in the boot args and that didnt help ? even tried to select imac pro1.1 but oc configurator is not saving my changes for some reason when selecting smbios... why is that happening ? i have lastest oc configuration 2.62.1.0 configuration editor:Propertree. https://github.com/corpnewt/ProperTree My efi has not added any dsdt patches,The dsdt patch is in my bios。 The correct installation will enter the black screen at the end -X needs to restart after the black screen System DSDT.aml Link to comment Share on other sites More sharing options...
ndungu6678 Posted October 15, 2022 Share Posted October 15, 2022 (edited) 12 hours ago, greythorne said: Just wanna check. Does anyone face issues with Bluetooth? It appears that when my Jabra ear piece cannot receive any sound. I am using a Bluetooth dongle which was working all the while until I updated to Beta 11. The kext BlueToolFixup is also enabled. This Bluetooth dongle do not need kext. I have a Logitech bluetooth wireless keyboard and Logitech Bluetooth Headphones which are always working after all updates with no problems (currently on beta 11)-do you have the following 3 highlighted kexts in your EFI kexts folder cause that's all I use ?( I have OC 0.8.6). Just a suggestion -not saying this may be the solution!: Build 1: iMac20,2, i5-9400F, Samsung 16GB DDR4 RAM, MSI Z390 Gaming Plus, Radeon RX 580 8GB, OC 0.8.6 Edited October 15, 2022 by ndungu6678 Link to comment Share on other sites More sharing options...
ruslan61 Posted October 15, 2022 Share Posted October 15, 2022 On 10/14/2022 at 2:52 PM, 陈军鹏 said: boot-args:-V -X safe mode I added -x mac os not suppoted didn't both monterey and ventura boot?😇 Link to comment Share on other sites More sharing options...
PoMpIs Posted October 15, 2022 Share Posted October 15, 2022 @Stefanalmare Could you confirm if on your laptop with the HD4000 you get this like this: And another question... in Ventura the micro never reaches 3300Mhz turbo: Ventura: Old capture from when I had monterey: Is this so in ventura or has a solution??? Cheers Link to comment Share on other sites More sharing options...
axonleo Posted October 15, 2022 Share Posted October 15, 2022 (edited) 7 hours ago, 陈军鹏 said: configuration editor:Propertree. https://github.com/corpnewt/ProperTree My efi has not added any dsdt patches,The dsdt patch is in my bios。 The correct installation will enter the black screen at the end -X needs to restart after the black screen System DSDT.aml 28.11 kB · 1 download what other smbios have u tried to boot ur x79 board ? i think imac pro1.1 is not working for me or maybe some other setting or ssdt file is messing things up ? 😕 Edited October 15, 2022 by axonleo Link to comment Share on other sites More sharing options...
axonleo Posted October 15, 2022 Share Posted October 15, 2022 (edited) So i made huge progress now i booted the installer with imac pro1.1 smbio and my dsdt.aml file, EC, HPET and usbmap.kext but i still cant get usb mouse and keyboard to work so i cant do much in the installer but when i boot with macpro6.1 smbios the mouse and keyboard works fine but then ventura tells me this installer is not compatible with this system so i cant do much either beside creating new partition in disk utility and surfing the web with safari 😕 Please check my edit EFI folder and tell me how to fix the usb problem ? EFI ventura x79.zip Edited October 15, 2022 by axonleo Link to comment Share on other sites More sharing options...
STLVNUB Posted October 16, 2022 Share Posted October 16, 2022 try changing USB ports on your case with your USB installer Link to comment Share on other sites More sharing options...
陈军鹏 Posted October 16, 2022 Share Posted October 16, 2022 4 hours ago, axonleo said: So i made huge progress now i booted the installer with imac pro1.1 smbio and my dsdt.aml file, EC, HPET and usbmap.kext but i still cant get usb mouse and keyboard to work so i cant do much in the installer but when i boot with macpro6.1 smbios the mouse and keyboard works fine but then ventura tells me this installer is not compatible with this system so i cant do much either beside creating new partition in disk utility and surfing the web with safari 😕 Please check my edit EFI folder and tell me how to fix the usb problem ? EFI ventura x79.zip 6.29 MB · 3 downloads You need to modify here 2 Link to comment Share on other sites More sharing options...
axonleo Posted October 16, 2022 Share Posted October 16, 2022 (edited) 7 hours ago, STLVNUB said: try changing USB ports on your case with your USB installer im not using usb pin to boot ventura installer but separate ssd partition that i created the installer too, much faster and much better. Edited October 16, 2022 by axonleo Link to comment Share on other sites More sharing options...
axonleo Posted October 16, 2022 Share Posted October 16, 2022 (edited) 5 hours ago, 陈军鹏 said: You need to modify here i needed to add imacpro1.1 for every personality in order for it to work so now i have working usb mouse and keyboard thanks a lot man but now i face a new problem after the first part of the installer is finished and i boot to the drive https://imgur.com/a/Ark5eo0 I guess i need the replace os.dmg method but cant find any valid link to the os.dmg to download ? Edited October 16, 2022 by axonleo Link to comment Share on other sites More sharing options...
Stefanalmare Posted October 16, 2022 Share Posted October 16, 2022 (edited) 13 hours ago, PoMpIs said: @Stefanalmare Could you confirm if on your laptop with the HD4000 you get this like this: And another question... in Ventura the micro never reaches 3300Mhz turbo: Ventura: Old capture from when I had monterey: Is this so in ventura or has a solution??? Cheers Yep! All good here: Spoiler Now for you: 1. I suggest to use CPUFriend.kext and build your CPUFriendDataProvider.kext 2. Enable Kernel->Quirks->AppleXcpmExtraMsrs 3. Add Kernel->Patch: Spoiler <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string>_xcpm_bootstrap</string> <key>Comment</key> <string>XCPM for Ivy Bridge. macOS 10.15.7 - 11.3 beta by 5T33Z0</string> <key>Count</key> <integer>1</integer> <key>Enabled</key> <true/> <key>Find</key> <data> jUPEPEI= </data> <key>Identifier</key> <string>kernel</string> <key>Limit</key> <integer>0</integer> <key>Mask</key> <data> </data> <key>MaxKernel</key> <string></string> <key>MinKernel</key> <string>19.</string> <key>Replace</key> <data> jUPGPEI= </data> <key>ReplaceMask</key> <data> </data> <key>Skip</key> <integer>0</integer> </dict> Spoiler Edited October 16, 2022 by Stefanalmare 2 1 Link to comment Share on other sites More sharing options...
陈军鹏 Posted October 16, 2022 Share Posted October 16, 2022 3 hours ago, axonleo said: i needed to add imacpro1.1 for every personality in order for it to work so now i have working usb mouse and keyboard thanks a lot man but now i face a new problem after the first part of the installer is finished and i boot to the drive https://imgur.com/a/Ark5eo0 I guess i need the replace os.dmg method but cant find any valid link to the os.dmg to download ? https://github.com/acidanthera/CryptexFixup 2 Link to comment Share on other sites More sharing options...
axonleo Posted October 16, 2022 Share Posted October 16, 2022 1 hour ago, 陈军鹏 said: https://github.com/acidanthera/CryptexFixup Yes i had this kext from the beginning but turned out that i haven't activated it in the boot arg in op with boot flag ( -cryptbeta ) anyways now i have managed to instal ventura so happy but now the next problem is my gtx 680 is not working and maybe oclp havent made a patch for it yet.. im not sure but when i try oclp post install patch its showing nothing for this system ? is there a fix or something else i can try to get the graphic working ? https://imgur.com/a/oZlrNbl Link to comment Share on other sites More sharing options...
PoMpIs Posted October 16, 2022 Share Posted October 16, 2022 5 hours ago, Stefanalmare said: Yep! All good here: Hide contents Now for you: 1. I suggest to use CPUFriend.kext and build your CPUFriendDataProvider.kext 2. Enable Kernel->Quirks->AppleXcpmExtraMsrs 3. Add Kernel->Patch: Reveal hidden contents <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string>_xcpm_bootstrap</string> <key>Comment</key> <string>XCPM for Ivy Bridge. macOS 10.15.7 - 11.3 beta by 5T33Z0</string> <key>Count</key> <integer>1</integer> <key>Enabled</key> <true/> <key>Find</key> <data> jUPEPEI= </data> <key>Identifier</key> <string>kernel</string> <key>Limit</key> <integer>0</integer> <key>Mask</key> <data> </data> <key>MaxKernel</key> <string></string> <key>MinKernel</key> <string>19.</string> <key>Replace</key> <data> jUPGPEI= </data> <key>ReplaceMask</key> <data> </data> <key>Skip</key> <integer>0</integer> </dict> Hide contents Yes, I already did that, but my lenovo's i5 3320m never exceeds 2.6Ghz... the turbo are missing up to 3.3Ghz 🙆♂️ Link to comment Share on other sites More sharing options...
Stefanalmare Posted October 16, 2022 Share Posted October 16, 2022 3 minutes ago, PoMpIs said: Yes, I already did that, but my lenovo's i5 3320m never exceeds 2.6Ghz... the turbo are missing up to 3.3Ghz 🙆♂️ Try ssdprgen.sh -turbo 3300 when you build CPUFriendDataProvider.kext 1 1 Link to comment Share on other sites More sharing options...
PoMpIs Posted October 16, 2022 Share Posted October 16, 2022 (edited) 17 minutes ago, Stefanalmare said: Try ssdprgen.sh -turbo 3300 when you build CPUFriendDataProvider.kext The SSDT is well generated, even if I add -turbo 3300 it is generated identical to the one I did before Does all the CPU turbos work for you on the ivy-bridge laptop? SSDT-PM.aml 10 hours ago, 陈军鹏 said: https://github.com/dortania/OpenCore-Legacy-Patcher/commit/964697a2c11f3f9c1ff6f0aa6919ba82200f1720 https://github.com/dortania/OpenCore-Legacy-Patcher/tree/ventura-alpha/payloads/Kexts/Misc I have tried this solution... it goes into a reboot loop, as soon as the pre-boot is passed, it reboots 😅 Edited October 16, 2022 by PoMpIs Link to comment Share on other sites More sharing options...
Stefanalmare Posted October 16, 2022 Share Posted October 16, 2022 (edited) 15 minutes ago, PoMpIs said: Does all the CPU turbos work for you on the ivy-bridge laptop? Yes. Run this in terminal: sysctl machdep.xcpm.mode I bet result is 0. You'll have XPCM enabled when result is 1. Edited October 16, 2022 by Stefanalmare 1 1 Link to comment Share on other sites More sharing options...
PoMpIs Posted October 16, 2022 Share Posted October 16, 2022 2 minutes ago, Stefanalmare said: Yes. But looking at a previous capture of yours, it shows that your i7 is going to 3.3Ghz... ( It's an i7 right? ) Should you get 3.8Ghz? Have you checked, for example, with Geekbench if you have the same result as in Monterey? Mine shows the loss Monterey: https://browser.geekbench.com/v5/cpu/11384825 Ventura: https://browser.geekbench.com/v5/cpu/17959547 And I have already tried everything possible and the problem is not solved 😅 Link to comment Share on other sites More sharing options...
Stefanalmare Posted October 16, 2022 Share Posted October 16, 2022 I've put a 45w processor in a 35w laptop. It doesn't use all the processor power. But yes, I have the same Geekbench score in all OS's. Spoiler Link to comment Share on other sites More sharing options...
PoMpIs Posted October 16, 2022 Share Posted October 16, 2022 7 minutes ago, Stefanalmare said: I've put a 45w processor in a 35w laptop. It doesn't use all the processor power. But yes, I have the same Geekbench score in all OS's. Hide contents What a strange thing, before you got 3.3Ghz and now 3.8Ghz... in mine the Intel power gadget does not exceed 2.6Ghz... it is strange, because I have done everything that is recommended to make it work step per step and never reaches 3.3Ghz which is its maximum frequency... I'm going to do other tests xD thank you very much 👍 3 Link to comment Share on other sites More sharing options...
Recommended Posts