eSaF Posted July 6, 2022 Share Posted July 6, 2022 15 minutes ago, FirstTimeCustomac said: This looks superb! Thank you for sharing this. Whew.... no mas tinkering around for this. Reveal hidden contents Hi - can you post your config.plist after removing your personal data so that I can make a comparison to my own because even though I use the above command script, I am not getting the same results as you. Thanks. 3 Link to comment Share on other sites More sharing options...
PoMpIs Posted July 6, 2022 Share Posted July 6, 2022 1 minute ago, eSaF said: Hi - can you post your config.plist after removing your personal data so that I can make a comparison to my own because even though I use the above command script, I am not getting the same results as you. Thanks. I had no idea about this and it worked for me Link to comment Share on other sites More sharing options...
eSaF Posted July 6, 2022 Share Posted July 6, 2022 Just now, PoMpIs said: I had no idea about this and it worked for me Yes I have the same but I would like mine to read 'Built-In'. Yours does not say Built-In, yours says Slot 1. Have another look at his. 1 Link to comment Share on other sites More sharing options...
PoMpIs Posted July 6, 2022 Share Posted July 6, 2022 2 minutes ago, eSaF said: Yes I have the same but I would like mine to read 'Built-In'. Yours does not say Built-In, yours says Slot 1. Have another look at his. I use SMBios from MacPro7.1 I guess it should be ok? 🤷♂️ 1 Link to comment Share on other sites More sharing options...
eSaF Posted July 6, 2022 Share Posted July 6, 2022 4 minutes ago, PoMpIs said: I use SMBios from MacPro7.1 I guess it should be ok? 🤷♂️ This is mine and the Entries should read Built-In Spoiler Link to comment Share on other sites More sharing options...
FirstTimeCustomac Posted July 7, 2022 Share Posted July 7, 2022 29 minutes ago, eSaF said: Hi - can you post your config.plist after removing your personal data so that I can make a comparison to my own because even though I use the above command script, I am not getting the same results as you. Thanks. Here you go. Config.zip If you wish to see iGPU usage in GPU History you may use platform-id 07009B3E without enable-metal. 2 1 Link to comment Share on other sites More sharing options...
Henties Posted July 7, 2022 Share Posted July 7, 2022 Bootloop OC 0.8.2, 4 July 2022, mobo GA-Z490 Vision G, Intel Core i9-10850K. Ventura behaves like a puppy chasing it's own tail and enjoying it. Greetings Henties 6 Link to comment Share on other sites More sharing options...
MifJpnAlphaPlus Posted July 7, 2022 Share Posted July 7, 2022 (edited) Thanks to everyone, I'm ready to run Ventura on my laptop (Skylake's X260, T460 equivalent Japanese laptop: NEC VK23VB-T). Special thanks to WhatEverGreen. Ventura installation on NEC VK23VB-T (Lenovo X260, T460) (How to adapt HD520) https://github.com/mifjpn/NEC-VK23VB-T-Hackintosh The stage manager feels good. However, the pad is still too small to launch a launcher with four fingers.😄 Edited July 7, 2022 by MifJpnAlphaPlus 3 Link to comment Share on other sites More sharing options...
surenmunoo Posted July 7, 2022 Share Posted July 7, 2022 No Luck on Gigabyte Z690. Tried SMBIOS 1,1 - 7.1-19.1 and 20.1 constant boot loop. I even tried with Xmp disabled and nothing. 2 Link to comment Share on other sites More sharing options...
Irish_Man Posted July 7, 2022 Share Posted July 7, 2022 Same here, bootloop Link to comment Share on other sites More sharing options...
eSaF Posted July 7, 2022 Share Posted July 7, 2022 (edited) Like a small child waiting in anxious anticipation we whisper..............are we there yet???!!! Edited July 7, 2022 by eSaF 2 1 7 Link to comment Share on other sites More sharing options...
Slice Posted July 7, 2022 Share Posted July 7, 2022 All these messages "same here" are useful to understand where is the fault as we all have very different hardware and different bootloaders and tunings. 7 1 Link to comment Share on other sites More sharing options...
PMheart Posted July 7, 2022 Share Posted July 7, 2022 1 hour ago, MifJpnAlphaPlus said: Thanks to everyone, I'm ready to run Ventura on my laptop (Skylake's X260, T460 equivalent Japanese laptop: NEC VK23VB-T). Special thanks to WhatEverGreen. Ventura installation on NEC VK23VB-T (Lenovo X260, T460) (How to adapt HD520) https://github.com/mifjpn/NEC-VK23VB-T-Hackintosh The stage manager feels good. However, the pad is still too small to launch a launcher with four fingers.😄 よかった! Have you experienced intermittent flickers? And are you able to play HEVC encoded videos? 1 Link to comment Share on other sites More sharing options...
Guest 5T33Z0 Posted July 7, 2022 Share Posted July 7, 2022 (edited) installation of beta 3 failed for me as well. Even with OC build from dp3_inject_fix branch. When booting macOS Ventura disk it recovered to 22A5286j in a few minutes and notified me that some updates couldn't be installed. I also had to revert to the last OC build from the master branch to boot into Big Sur. Edited July 7, 2022 by 5T33Z0 Link to comment Share on other sites More sharing options...
Joshua60 Posted July 7, 2022 Share Posted July 7, 2022 (edited) installation boot loop, rig #2 Ventura Beta 2 working Edited July 7, 2022 by Joshua60 Link to comment Share on other sites More sharing options...
SavageAUS Posted July 7, 2022 Share Posted July 7, 2022 On my laptop I am stuck at “virtual boot IONVMeContraller::start(IOService *)::831:Successfully initialised NVMe drive” No further progress on Beta3 1 Link to comment Share on other sites More sharing options...
MifJpnAlphaPlus Posted July 7, 2022 Share Posted July 7, 2022 (edited) 51 minutes ago, PMheart said: よかった! Have you experienced intermittent flickers? And are you able to play HEVC encoded videos? だいじょうぶです。😄 ありがとう! Edited July 7, 2022 by MifJpnAlphaPlus Link to comment Share on other sites More sharing options...
mhaeuser Posted July 7, 2022 Share Posted July 7, 2022 (edited) 2 hours ago, Slice said: All these messages "same here" are useful to understand where is the fault as we all have very different hardware and different bootloaders and tunings. There are (maybe at least) two faults, one in OC and (probably at least) one in Lilu due to Apple doing weird voodoo with KC again. The former is identified, but the fix is rather involved and needs thorough testing (including old versions of macOS) and the latter was not yet identified (this causes the KP). There is nothing for the general public to test, nothing to see here. 1 hour ago, 5T33Z0 said: I also had to revert to the last OC build from the master branch to boot into Big Sur. Any log or detailed problem report? The branch may be buggy, hence it's not in master. EDIT: @5T33Z0: Pushed another fix. Ideally, it now behaves as follows: - All macOS versions before Ventura Beta 3 behave as they did before, no changes whatsoever - Ventura Beta 3 KPs when loading Lilu, same KP has shown here multiple times - Ventura Beta 3 without Lilu should behave like macOS does when it lacks Lilu (and especially VSMC) - This new fix should perform more or less the same as the very first fix from yesterday (if you didn't try it, no need to, its design was flawed) Edited July 7, 2022 by Download-Fritz 6 1 Link to comment Share on other sites More sharing options...
Slice Posted July 7, 2022 Share Posted July 7, 2022 The problem with Lilu is not concerning me. I am booted always without it. "nothing to see here" to you. 3 2 Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted July 7, 2022 Share Posted July 7, 2022 (edited) Same here (Did I do that right?) On another note, it wouldn't let me do the incremental update: "Couldn't prepare the update for installation". It then offered me to download the full installer instead. However, exitting System settings and reopening the software-update panel offersme the incremental update which again fails, offers me the full download again and the circle continues. I feel like a child in a carousel.🎠 Edited July 7, 2022 by ricoc90 Link to comment Share on other sites More sharing options...
kaoskinkae Posted July 7, 2022 Share Posted July 7, 2022 In my coffee lake same problem as the vast majority infinite loop with the first restart Link to comment Share on other sites More sharing options...
aben Posted July 7, 2022 Share Posted July 7, 2022 New development for Skylake users: As tested and observed, currently (as of beta 2) it is possible to achieve iGPU acceleration on SKL with help of KBL kexts/profiles (spoofing) however this came with caveats, as expected; specifically with regards to codec(s) hw-decode support. The first noticeable issue was YouTube-playback on Safari, which was resolved by simply dropping the VP9 flag from the KBL profile, since SKL does not have VP9 hw-decode support. All credits to @dhinakg and @PMheart for their collaborative work implementing a robust patch into WEG while maintaining KBL kexts untouched as possible. Upon further testing, it seems there is actually one more codec-related issue still lurking; this time with HEVC encoded playback even though VideoProc/VDADecoderChecker do report "full" acceleration status (enc/dec) for HEVC codec. Those spoofing to KBL may test this out by playing a HEVC encoded video via VLC, QuickTime Player etc. you should see garbled/half green frames. After performing a few tests over the past week, I was able to track down the problematic HEVC flag in KBL profile that causes this incompatibility with HEVC playback on SKL and managed to implement a working patch in a test branch of WEG that fixes this issue. I must admit the code implemented is not exactly perfect but it does the job as far as my testing goes; no more HEVC codec issues seen. SKL users on Ventura may choose to test below attached WEG 1.6.1 SOLELY for testing HEVC related issues or as a temporary solution while waiting for official support from Acidanthera members. CC @PMheart skl-hevc-test.zip 5 1 Link to comment Share on other sites More sharing options...
nexusneko Posted July 7, 2022 Share Posted July 7, 2022 Almost the same here! And corrupted BIOS settings on every reboot. 😝 Link to comment Share on other sites More sharing options...
mhaeuser Posted July 7, 2022 Share Posted July 7, 2022 1 hour ago, Slice said: The problem with Lilu is not concerning me. I am booted always without it. "nothing to see here" to you. As you know, Clover uses OC, and OC doesn't work right now, so same difference. "Nothing to see here" was to the people who pull code review and debugging branches and complain they do not boot. 7 Link to comment Share on other sites More sharing options...
dehjomz Posted July 7, 2022 Share Posted July 7, 2022 1 hour ago, Download-Fritz said: There are (maybe at least) two faults, one in OC and (probably at least) one in Lilu due to Apple doing weird voodoo with KC again. What sort of voodoo? I’m Always interested in what Apple changes… Link to comment Share on other sites More sharing options...
Recommended Posts