hiphopboy Posted July 2, 2022 Share Posted July 2, 2022 15 hours ago, anerik70 said: of course! https://drive.google.com/file/d/1Eqq2XCatk5bvuazfUNZmE8NIsTIyrjl6/view?usp=sharing thanks, i will testing this file, my old EFI can install it but just reboot loop after install done Link to comment Share on other sites More sharing options...
hiphopboy Posted July 2, 2022 Share Posted July 2, 2022 On 6/30/2022 at 11:08 PM, Ludox said: these cards are not supported by Ventura, we are waiting for some developers to find a way to make them operational full profile. Wait chris1111 for this patcher Link to comment Share on other sites More sharing options...
SavageAUS Posted July 2, 2022 Share Posted July 2, 2022 (edited) On 6/26/2022 at 6:27 PM, D3v1L said: i retract LoL Metal 3 xD I have a RX6800XT and cannot get my install to work correctly. I either get a black screen or grey with cursor. I have tried adgpmod=ignore and wegoff and adgpmod=pikera to no avail. OC version 0.8.2 commit e733af2, kexts are updated to latest commits as of writing this. To expand on this, I can reach the installer, format the drive and the first stage of the install goes fine. It is either the second stage or the initial setup screens when the black or grey screens occur. This is also on an AMD system with updated Ventura patches. Edited July 2, 2022 by SavageAUS Link to comment Share on other sites More sharing options...
D3v1L Posted July 2, 2022 Share Posted July 2, 2022 (edited) 2 hours ago, SavageAUS said: I have a RX6800XT and cannot get my install to work correctly. I either get a black screen or grey with cursor. I have tried adgpmod=ignore and wegoff and adgpmod=pikera to no avail. OC version 0.8.2 commit e733af2, kexts are updated to latest commits as of writing this. To expand on this, I can reach the installer, format the drive and the first stage of the install goes fine. It is either the second stage or the initial setup screens when the black or grey screens occur. This is also on an AMD system with updated Ventura patches. It depends on what smbios you use...if is MacPro7,1 or iMacPro1,1 , you need to inject correct framebuffer for RX6800XT in your config.plist (my real Apple MacPro7,1 with Radeon W6800X DUO have the same issue with Ventura...remember, Ventura is alpha/beta release...don't work like a charm until MacOS 14 come out ahahah xD LoL ) Edited July 2, 2022 by D3v1L 2 Link to comment Share on other sites More sharing options...
D3v1L Posted July 2, 2022 Share Posted July 2, 2022 (edited) example: RX6800/XT you need to use ATY,Belknap framebuffer... try it! just add your pci root of your RX6800XT and then @0,name ATY,Belknap on Device Properties in config.plist like pic: (put Belknap instead Henbury) you find PciRoot of your RX in Hackintool PCI tab: simply right clic, copy device path Edited July 2, 2022 by D3v1L 1 Link to comment Share on other sites More sharing options...
Ellybz Posted July 2, 2022 Share Posted July 2, 2022 (edited) Does anyone have the kernel AppleXcpmCfgLock working with Ventura?. ( Mostly needed on some GA Mobos ) X99/X299? I have constant KP on wake from sleep, which is also what happens if I remove the quirk in previous version of OSX ( tested from Mojave -> Monterey ). Edited July 2, 2022 by Ellybz Link to comment Share on other sites More sharing options...
eSaF Posted July 2, 2022 Share Posted July 2, 2022 38 minutes ago, Ellybz said: Does anyone have the kernel AppleXcpmCfgLock working with Ventura?. ( Mostly needed on some GA Mobos ) This is the setting on my GA-Z390 in Ventura, no problem with Sleep/Wake. Hope I interpreted your query correctly. Spoiler Link to comment Share on other sites More sharing options...
Ellybz Posted July 2, 2022 Share Posted July 2, 2022 (edited) 44 minutes ago, eSaF said: This is the setting on my GA-Z390 in Ventura, no problem with Sleep/Wake. Hope I interpreted your query correctly. Hide contents Thank you my friend but if you didn’t need this quirk before OSX Ventura, chances are you won't needed. That’s why I wrote “some Mobos”. Most likely x99/ X299 😉 Edited July 2, 2022 by Ellybz 2 1 Link to comment Share on other sites More sharing options...
surenmunoo Posted July 2, 2022 Share Posted July 2, 2022 9 hours ago, SavageAUS said: I have a RX6800XT and cannot get my install to work correctly. I either get a black screen or grey with cursor. I have tried adgpmod=ignore and wegoff and adgpmod=pikera to no avail. OC version 0.8.2 commit e733af2, kexts are updated to latest commits as of writing this. To expand on this, I can reach the installer, format the drive and the first stage of the install goes fine. It is either the second stage or the initial setup screens when the black or grey screens occur. This is also on an AMD system with updated Ventura patches. I use the RX6800XT as well on my Z690 and have no issues. Ventura including beta 2 installed nicely. 1 Link to comment Share on other sites More sharing options...
PMheart Posted July 2, 2022 Share Posted July 2, 2022 2 hours ago, Ellybz said: Does anyone have the kernel AppleXcpmCfgLock working with Ventura?. ( Mostly needed on some GA Mobos ) X99/X299? I have constant KP on wake from sleep, which is also what happens if I remove the quirk in previous version of OSX ( tested from Mojave -> Monterey ). I am pretty sure that this patch works with Ventura when I was checking all quirks. You can leave it on if you have problems without it? 5 Link to comment Share on other sites More sharing options...
SavageAUS Posted July 3, 2022 Share Posted July 3, 2022 12 hours ago, D3v1L said: It depends on what smbios you use...if is MacPro7,1 or iMacPro1,1 , you need to inject correct framebuffer for RX6800XT in your config.plist (my real Apple MacPro7,1 with Radeon W6800X DUO have the same issue with Ventura...remember, Ventura is alpha/beta release...don't work like a charm until MacOS 14 come out ahahah xD LoL ) I’m using MacPro7,1 and I have followed a guide about adding those device properties but it had more than one listed It had @0 and @1 and@2 I think. Do I only need the one line? @0,name belknap Link to comment Share on other sites More sharing options...
Ellybz Posted July 3, 2022 Share Posted July 3, 2022 (edited) 5 hours ago, PMheart said: I am pretty sure that this patch works with Ventura when I was checking all quirks. You can leave it on if you have problems without it? Thanks for your quick response. Leaving this quirk ON or OFF does not affect functionality or Boot. I was only using it in past OS(s) to avoid KP upon wake from sleep. ( which I systematically get in Mojave-> Monterey ) I tried to get more info from the Crash Logs, but it didn't help much. I also physically disconnected WIFI/BT Boot with Minimum Kexts. Reset nvram. Same story. I'm just baffled... I attached the crash logs. corecaptured-2022-07-02-202630.ipsKernel-2022-07-02-205548.panic Edited July 3, 2022 by Ellybz Link to comment Share on other sites More sharing options...
D3v1L Posted July 3, 2022 Share Posted July 3, 2022 (edited) 2 hours ago, SavageAUS said: I’m using MacPro7,1 and I have followed a guide about adding those device properties but it had more than one listed It had @0 and @1 and@2 I think. Do I only need the one line? @0,name belknap If you use only @0, the 1,2,3 pick up same value... Put all port framebuffer is needed when you want to separate every port with different fb...like you want port 0 with Belknap, port 1 with Henbury etc...if you want same fb for all port, only 0 Is needed... Btw, MP7,1 , put @0 patch, remove whatevergreen and the related bootarg agdpmod=pikera and give it a shot Edited July 3, 2022 by D3v1L 1 Link to comment Share on other sites More sharing options...
Slice Posted July 3, 2022 Share Posted July 3, 2022 46 minutes ago, D3v1L said: If you use only @0, the 1,2,3 pick up same value... Put all port framebuffer is needed when you want to separate every port with different fb...like you want port 0 with Belknap, port 1 with Henbury etc...if you want same fb for all port, only 0 Is needed... Btw, MP7,1 , put @0 patch, remove whatevergreen and the related bootarg agdpmod=pikera and give it a shot Is it possible? AFAIK one framebuffer describes all ports. Link to comment Share on other sites More sharing options...
D3v1L Posted July 3, 2022 Share Posted July 3, 2022 40 minutes ago, Slice said: Is it possible? AFAIK one framebuffer describes all ports. absolutely yes. Link to comment Share on other sites More sharing options...
Matgen84 Posted July 3, 2022 Share Posted July 3, 2022 11 hours ago, Ellybz said: Does anyone have the kernel AppleXcpmCfgLock working with Ventura?. ( Mostly needed on some GA Mobos ) X99/X299? I have constant KP on wake from sleep, which is also what happens if I remove the quirk in previous version of OSX ( tested from Mojave -> Monterey Hi @Ellybz this quirk is not needed if CFG-Lock is disabled in the BIOS. 1 Link to comment Share on other sites More sharing options...
carlo_67 Posted July 3, 2022 Share Posted July 3, 2022 4 hours ago, SavageAUS said: I’m using MacPro7,1 and I have followed a guide about adding those device properties but it had more than one listed It had @0 and @1 and@2 I think. Do I only need the one line? @0,name belknap it has an AMD platform and you don't need all of that, it works OB with nothing at all Link to comment Share on other sites More sharing options...
Ellybz Posted July 3, 2022 Share Posted July 3, 2022 20 minutes ago, Matgen84 said: Hi @Ellybz this quirk is not needed if CFG-Lock is disabled in the BIOS. There are different kinds of CFG Locks. (BIOS/CPU) On all Gigabyte X299 , ( This my second X299 GA Mobo ) even if CFG Lock is disabled in Bios, you'd sill need a XCPM Kernel to patch entry for the xcpm_core_scope_msrs. As far as I can remember, it needed to be updated on each OS release. It was done manually in Clover, but with OpenCore, a quirk was created for this purpose. Thank you Devs! Again this issue does not affect boot or functionality. It is only related to a KP after wake from sleep. Z390 is not affected by the issue. 1 Link to comment Share on other sites More sharing options...
Anto65 Posted July 3, 2022 Share Posted July 3, 2022 13 hours ago, Ellybz said: Does anyone have the kernel AppleXcpmCfgLock working with Ventura?. ( Mostly needed on some GA Mobos ) X99/X299? I have constant KP on wake from sleep, which is also what happens if I remove the quirk in previous version of OSX ( tested from Mojave -> Monterey ). Hi , How did you get here? Kernel > Quirks > PowerTimeoutKernelPanic In my case if disabled ... it restarts when wake up from sleep Link to comment Share on other sites More sharing options...
SavageAUS Posted July 3, 2022 Share Posted July 3, 2022 (edited) 2 hours ago, carlo_67 said: it has an AMD platform and you don't need all of that, it works OB with nothing at all So I just tried booting into the installed Ventura with only 1 frame buffer listed, no weg and no boot arg. That didn’t help. Rebooted into the same installed Ventura without any device properties and no weg and no boot arguments and I made it into initial setup until I got to wifi setup then I got a grey screen. I am reinstalling beta 1 with no weg and no device properties to see how I go this time. Based on the wifi card in my signature what kexts should I be using? Keeping in mind what I am currently using works great in Monterey. I have attached my OC EFI. After the last try with settings as above I got past the wifi screen then my machine rebooted. It must be something simple. Any suggestions? EFI.zip Edited July 3, 2022 by SavageAUS Link to comment Share on other sites More sharing options...
carlo_67 Posted July 3, 2022 Share Posted July 3, 2022 2 hours ago, SavageAUS said: Quindi ho appena provato ad avviare il Ventura installato con solo 1 frame buffer elencato, nessun weg e nessun boot arg. Questo non ha aiutato. Riavviato nella stessa Ventura installata senza alcuna proprietà del dispositivo e senza weg e senza argomenti di avvio e sono entrato nella configurazione iniziale fino a quando non sono arrivato alla configurazione wifi, quindi ho ottenuto uno schermo grigio. Sto reinstallando la beta 1 senza weg e senza proprietà del dispositivo per vedere come vado questa volta. In base alla scheda wifi nella mia firma, quali kext dovrei usare? Tenendo a mente quello che sto usando attualmente funziona benissimo a Monterey. Ho allegato il mio OC EFI. EFI.zip 5,21 MB · 6 download Try this Efi, put your EFI aside, I changed BootArg and removed the plugins EFI.zip Link to comment Share on other sites More sharing options...
SavageAUS Posted July 3, 2022 Share Posted July 3, 2022 1 hour ago, carlo_67 said: Try this Efi, put your EFI aside, I changed BootArg and removed the plugins EFI.zip 5.22 MB · 5 downloads Ok so just the AirportBrcmFixup.kext plugins were removed and the bootarg added? I have the same wifi card in my laptop and just realised im not even using AirportBrcmFixup.kext Link to comment Share on other sites More sharing options...
alexmac67 Posted July 3, 2022 Share Posted July 3, 2022 (edited) OC 0.8.1 macOS Catalina,Big Sur,Monterey Dell Vostro 15-3568 Intel Core i3-6006U, 2000 MHz-Skylake-U DDR4-1333, DDR4-1600, DDR4-1866, DDR4-2133 SDRAM Intel HD Graphics 520 Realtek ALC256 audio Realtek RTL8168/8111 PCI-E Gigabit Ethernet Adapter WI-FI DW1560 Sources: https://dortania.github.io/OpenCore-Install-Guide/config-laptop.plist/kaby-lake.html#deviceproperties https://www.insanelymac.com/forum/topic/351969-pre-release-macos-ventura/page/8/#comment-2784082 https://osxlatitude.com/forums/topic/17292-macos-ventura-130-beta1-early-feedback-and-findings/ https://dortania.github.io/builds/?product=OpenCorePkg&viewall=true&version=0.8.2&sha=d804b31f8dff32081fd9f04d28e01c5643016d6c https://github.com/zmlu/Hackintosh-OC-Colorful-C.B150M-i5-6500-Skylake-HD530/blob/main/Ventura/EFI/OC/config.plist Hi, a very brief description of installing macOS Ventura on a Dell Vostro. the camera is not connected. HD Graphics 520 is normal by my standards, audio, wired internet work. wi-fi is detected and working)After closing and opening the laptop lid, the system wakes up. Touchpad, gesture, keyboard work,Booting macOS Ventura from an external SSD drive As described above, there are some pitfalls. I'm just a user - this is my hobby and experiments. Pre.OC 0.8.2 macOS Ventura. https://drive.google.com/file/d/1sZ80ItkXzg-BIS02tkEJ878ltJ60AYbc/view?usp=sharing От всего сердца Благодарю разработчиков,программистов From the bottom of my heart I thank the developers, programmers) Alexander’s MacBook Pro.ioreg.zip config.plist Edited July 5, 2022 by alexmac67 Add config.plist 7 Link to comment Share on other sites More sharing options...
carlo_67 Posted July 3, 2022 Share Posted July 3, 2022 2 hours ago, SavageAUS said: Ok, quindi solo i plugin AirportBrcmFixup.kext sono stati rimossi e aggiunti il bootarg? Ho la stessa scheda wifi nel mio laptop e mi sono appena reso conto che non sto nemmeno usando AirportBrcmFixup.kext so does it work? because I just copied the procedure here https://www.macos86.it/topic/5792-wifi-lentoooo/?tab=comments#comment-131599 thank you Lorys89 https://github.com/acidanthera/AirportBrcmFixup Link to comment Share on other sites More sharing options...
vrishcons Posted July 3, 2022 Share Posted July 3, 2022 Hi all, With ease no hackintosh works, without testing our patience. Me too had and having the same issue. After fighting, got my HP Omen i7 7700HQ with nividia 1050( anyways disabled with boot arg in open core). The problem for me this works with open core 0.8.2 but Monterey work with clover. Guys have any suggestions to get clover 5147 (Latest) work? DSDT doesn't get recognised fully. Link to comment Share on other sites More sharing options...
Recommended Posts