Guest 5T33Z0 Posted June 18, 2022 Share Posted June 18, 2022 Hmmm, then I guess this is a property provided by Whatevergreen. Thanks for testing Link to comment Share on other sites More sharing options...
D3v1L Posted June 18, 2022 Share Posted June 18, 2022 1 minute ago, 5T33Z0 said: Hmmm, then I guess this is a property provided by Whatevergreen. Thanks for testing at the moment i need to go out for work...btw when i come at home, i'll try with this mode + weg and reply! 😉 Link to comment Share on other sites More sharing options...
PoMpIs Posted June 18, 2022 Share Posted June 18, 2022 I can only use SMBios iMacPro1.1 on my B660, if I go to MacPro7.1 I lose CPU turbos. If I use iMac20,2 the RX6600 works, but I lose DRM and USBs... I'm at a dead end.. With iMacPro1,1 the 6600 works with Henbury, but it only reaches the ventura desktop once in ten attempts.. If I use the RX6650XT, it works like a charm and loads the desktop every time, but I lose DRM in Ventura, in Monterey if DRM works. I'm gonna go crazy 😆 Link to comment Share on other sites More sharing options...
eSaF Posted June 18, 2022 Share Posted June 18, 2022 (edited) 2 hours ago, FrDakota said: (I don't see any lock in the new SystemPreferences) Hi - Maybe I am off track with your query or maybe you're referring to this Setting in Ventura (attached) Spoiler Edited June 18, 2022 by eSaF Link to comment Share on other sites More sharing options...
ichelash Posted June 18, 2022 Share Posted June 18, 2022 Test 85, getting a repeat of this for more than an hour Intel HD 530, @Cyberdevs EFI Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 18, 2022 Share Posted June 18, 2022 2 minutes ago, ichelash said: Test 85, getting a repeat of this for more than an hour Intel HD 530, @Cyberdevs EFI Post your EFI folder and I'll take a look. Link to comment Share on other sites More sharing options...
ichelash Posted June 18, 2022 Share Posted June 18, 2022 Just now, Cyberdevs said: Post your EFI folder and I'll take a look. It’s the one you sent to me, I’m trying to install Ventura now Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 18, 2022 Share Posted June 18, 2022 1 minute ago, ichelash said: It’s the one you sent to me, I’m trying to install Ventura now Did you change anything in my EFI? because I don't get any errors when I use that EFI folder. Link to comment Share on other sites More sharing options...
ichelash Posted June 18, 2022 Share Posted June 18, 2022 Just now, Cyberdevs said: Did you change anything in my EFI? because I don't get any errors when I use that EFI folder. Nope. just as it comes Link to comment Share on other sites More sharing options...
ichelash Posted June 18, 2022 Share Posted June 18, 2022 16 minutes ago, Cyberdevs said: Did you change anything in my EFI? because I don't get any errors when I use that EFI folder. Stuck here Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 18, 2022 Share Posted June 18, 2022 15 minutes ago, ichelash said: Stuck here For the installation you need to remove the DeviceProperties once you have installed Ventura you can use the iGPU settings. 1 1 Link to comment Share on other sites More sharing options...
ichelash Posted June 18, 2022 Share Posted June 18, 2022 1 minute ago, Cyberdevs said: For the installation you need to remove the DeviceProperties once you have installed Ventura you can use the iGPU settings. Alright..on it Link to comment Share on other sites More sharing options...
maly70 Posted June 18, 2022 Share Posted June 18, 2022 Hello Mates, I installed Ventura b 1 a Gigabyte z490 Pro, gpu 10400, then installed same os into Gigabyte z590 Vision G and Gigabyte Z590 Elite AX with Nvidia 710 all works fine except vision G and Elite Ax no full acceleration(because of Nvidia card). Cyberdevs, you are the best I saw that helps from his heart, keep it up 7 minutes ago, Cyberdevs said: For the installation you need to remove the DeviceProperties once you have installed Ventura you can use the iGPU settings. You are the best Cyberdevs, keep it up 3 1 Link to comment Share on other sites More sharing options...
ichelash Posted June 18, 2022 Share Posted June 18, 2022 5 minutes ago, maly70 said: Hello Mates, I installed Ventura b 1 a Gigabyte z490 Pro, gpu 10400, then installed same os into Gigabyte z590 Vision G and Gigabyte Z590 Elite AX with Nvidia 710 all works fine except vision G and Elite Ax no full acceleration(because of Nvidia card). Cyberdevs, you are the best I saw that helps from his heart, keep it up You are the best Cyberdevs, keep it up The fellas around this forum are the best ever. Mad respect to everyone helping around here. 4 Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 18, 2022 Share Posted June 18, 2022 6 minutes ago, maly70 said: no full acceleration(because of Nvidia card). you can plug your display to the mainborad's display output instead of the nVidia GPU while if the iGPU is supported you can also disable the nVidia like shown in the picture: 1 1 Link to comment Share on other sites More sharing options...
SchlachtbankHS Posted June 18, 2022 Share Posted June 18, 2022 14 hours ago, anerik70 said: XFX Radeon RX570 8GB is the problem! I did this: 1. Boot with the EFI I use for Monterrey. Run de installer from macOS Monterrey (I created a partition for ventura). 2. System reboot (change to ventura EFI what I send you in the last reply) and continue the installer. When the partition name change and recovery macOS 13 appears, reboot again with the Monterrey's EFI and enter to recovery macOS 12. 3. Change the os.dmg as the MacRumors guide explain. 4. Reboot with the ventura EFI and let the installer finish (it finish in black screen when config window should appears. It is because your rx570). At this point ventura is installed but no graphics usable. 5. Change my rx470 for a non Polaris card and boot ventura (there is video And the config windows appears). 6. Finish the config. I tried with another gpu (gt760) but got stuck at the same point. I double checked my EFI with yours and it’s the same Link to comment Share on other sites More sharing options...
maly70 Posted June 18, 2022 Share Posted June 18, 2022 37 minutes ago, Cyberdevs said: you can plug your display to the mainborad's display output instead of the nVidia GPU while if the iGPU is supported you can also disable the nVidia like shown in the picture: Dear Cyberdevs, I installed Ventura into z490 with igpu 10400 and working great, still waiting for Nvidia patch Thank you Link to comment Share on other sites More sharing options...
MaLd0n Posted June 18, 2022 Share Posted June 18, 2022 11 hours ago, surenmunoo said: Hi I just tried it and it boots but I don't have wifi, bluetooth and use of the 10G Network Port. Alsomy Thunderbolt bolts don't show in Hackintool. Don't use it. This file is from my mobo. U need edit ur. Is personal thing not generic. 2 Link to comment Share on other sites More sharing options...
MifJpnAlphaPlus Posted June 18, 2022 Share Posted June 18, 2022 Hello everyone. Everyone posted a lot, so I was able to boot well. (Thank you very much) There are three things that don't work. I made almost all nightly builds, but is it still not working? (i9 10900F, RX-570, Asus Tuf Gaming 570 pro) 1, ALC1200 does not work. 2, I don't feel that WEG is moving. (Pikera etc. will be ignored and purple lines will be displayed in the middle of startup) 3, BCM20702 USB Dongle doesn't work on the same kext as Monterey. I'm looking forward to Ventura working well in the future. Please let me know if you have any information. Thank you. OC.zip 2 Link to comment Share on other sites More sharing options...
D3v1L Posted June 18, 2022 Share Posted June 18, 2022 4 hours ago, 5T33Z0 said: Hmmm, then I guess this is a property provided by Whatevergreen. Thanks for testing nothing to do... with fb_name and WEG, black screen and "no signal" on monitor Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 18, 2022 Share Posted June 18, 2022 @MifJpnAlphaPlus Try this, test it on a USB disc first and if it works you can replace your own efi. For the audio it's better to use the DeviceProperties rather than injecting it via nvram. OC.zip 3 1 Link to comment Share on other sites More sharing options...
FirstTimeCustomac Posted June 18, 2022 Share Posted June 18, 2022 Anyone able to inject Orinoco framebuffer? Or has it been removed from macOS Ventura? Link to comment Share on other sites More sharing options...
Stefanalmare Posted June 18, 2022 Share Posted June 18, 2022 3 minutes ago, FirstTimeCustomac said: Anyone able to inject Orinoco framebuffer? Or has it been removed from macOS Ventura? Hhehehheheheh! I'm in the same situation. No way to make RX 570 working in Ventura. Any hint? Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 18, 2022 Share Posted June 18, 2022 12 minutes ago, FirstTimeCustomac said: Anyone able to inject Orinoco framebuffer? Or has it been removed from macOS Ventura? No it's still there: These Device ID are available in AMD9500Controller.kext: Spoiler 0x67E01002 0x67E31002 0x67E81002 0x67EB1002 0x67EF1002 0x67FF1002 0x67E11002 0x67E71002 0x67E91002 0x67C01002 0x67C11002 0x67C21002 0x67C41002 0x67C71002 0x67DF1002 0x67D01002 0x67C81002 0x67C91002 0x67CA1002 0x67CC1002 0x67CF1002 3 Link to comment Share on other sites More sharing options...
FirstTimeCustomac Posted June 18, 2022 Share Posted June 18, 2022 (edited) 32 minutes ago, Stefanalmare said: Hhehehheheheh! I'm in the same situation. No way to make RX 570 working in Ventura. Any hint? I do have RX 580 that just works. Initially, it was showing all purple line on top and displayport did not work(Only HDMI worked) before reaching the desktop but after adding -lilubetaall all worked out except Orinoco FB being injected. 23 minutes ago, Cyberdevs said: No it's still there Thank you for confirming that This is what I have I've tried - SSDT method, - Changing part# in vBIOS to Mac Edition's part# which worked in previous macOS versions. - @name, string (DeviceProperty) - fb_name, string (DeviceProperty) None of these seem to inject Orinoco FrameBuffer. Any suggestions? Edited June 18, 2022 by FirstTimeCustomac Link to comment Share on other sites More sharing options...
Recommended Posts