john jairo garcia garcia Posted February 17, 2022 Share Posted February 17, 2022 hello, I am trying to install MONTEREY, in my pc with these specifications but I have not been able to upload the system I leave the error that gives me do not know much of the subject I hope I can help or guide me Specs macOS MONTEREY CPU: Intel Core™ i7-11700KF Motherboard: MSI H510I PRO RAM: OLOy DDR4 2x16GB UDIMM, total 32 GB, 3000 MHz CL16. Graphics Card:MSI Gaming AMD Radeon RX 6600 XT 8GB GDDR6 128-Bit HDMI/DP Torx Fan RGB Wifi Card: WiFi Plug & Play M.2 NGFF BCM94360NG 802.11ac Bluetooth 4.0, WiFi 500 GB Crucial MX500 Sequential reads/writes up to 560/510MB/s1 SEKC SM250512G NVMe M.2 2280 PCIe Gen 3x4 512GB Errror Spoiler opencore-2022-02-16-21 00:000 00:000 AAPL: #[EB.H.IS|!] Err(0xE) <- RT.GV boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82 00:056 00:056 AAPL: #[EB.H.IS|!] Err(0xE) <- RT.GV boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82 00:112 00:056 AAPL: #[EB|H:IS] 0 00:168 00:056 AAPL: #[EB|LOG:INIT] 2022-02-16T21:22:54 00:225 00:056 AAPL: #[EB|VERSION] <"boot.efi 540.80.2~11 (Official), built 2021-12-17T18:41:20-0800"> 00:281 00:056 AAPL: #[EB|BUILD] <"BUILD-INFO[298]:{"DisplayName":"boot.efi","DisplayVersion":"540.80.2~11","RecordUuid":"4C1050E5-0AC2-49AF-A6E3-E8F54238A54E","BuildTime":"2021-12-17T18:41:20-0800","ProjectName":"efiboot","ProductName":"boot.efi","SourceVersion":"540.80.2","BuildVersion":"11","BuildConfiguration":"Release","BuildType":"Official"}"> 00:338 00:056 AAPL: #[EB.CFG.DEV|!] Err(0xE) <- RT.GV booter-strict-xmlparser 7C436110-AB2A-4BBB-A880-FE41995C9F82 00:394 00:056 AAPL: #[EB|CFG:DEV] r5 0x0 0x0 00:451 00:056 AAPL: #[EB|H:IS] 0 00:507 00:056 AAPL: #[EB|WL:MODE] 0 00:563 00:056 AAPL: #[EB|CFG:ARG] boot-save-log 0x0000000000000002 (0x0000000000000002 < 0xFFFFFFFFFFFFFFFF) default 00:619 00:056 AAPL: #[EB|CFG:ARG] wake-save-log 0x0000000000000002 (0x0000000000000002 < 0x0000000000000002) default 00:675 00:056 AAPL: #[EB|CFG:ARG] console 0x0000000000000001 (0x0000000000000001 < 0x0000000000000001) default 00:732 00:056 AAPL: #[EB|CFG:ARG] serial 0x0000000000000001 (0x0000000000000001 < 0x0000000000000000) default 00:788 00:056 AAPL: #[EB|CFG:ARG] preoslog 0x0000000000000001 (0x0000000000000001 < 0xFFFFFFFFFFFFFFFF) default 00:844 00:056 AAPL: #[EB|CFG:ARG] timestamps 0x0000000000000000 (0x0000000000000000 < 0xFFFFFFFFFFFFFFFF) default 00:901 00:056 AAPL: #[EB|CFG:ARG] log-level 0x0000000000000001 (0x0000000000000001 & 0x0000000000000021) default 00:957 00:056 AAPL: #[EB|CFG:ARG] breakpoint 0x0000000000000000 (0x0000000000000000 & 0x0000000000000000) default 01:013 00:056 AAPL: #[EB|CFG:ARG] kc-read-size 0x0000000000100000 (0x0000000000100000 < 0xFFFFFFFFFFFFFFFF) default 01:069 00:055 AAPL: #[EB|H:IS] 0 01:125 00:056 AAPL: #[EB|WL] 0 0 0x01 0x01 0 0x00 01:181 00:056 AAPL: #[EB|BRD:NV] Mac-CFF7D910A743CAAF 01:238 00:056 AAPL: #[EB|B:VAw] 01:294 00:056 AAPL: #[EB|B:IAw] 01:351 00:056 AAPL: #[EB|WL] 0 0 0x01 0x01 2 0x00 01:408 00:056 AAPL: #[EB|B:RRVAR] <909090909090> 01:464 00:056 AAPL: #[EB.BST.IDT|+] 01:521 00:056 AAPL: #[EB|BM] J185AP 01:579 00:058 AAPL: #[EB.BST.IDT|-] 01:635 00:055 AAPL: #[EB|WL] 0 0 0x01 0x01 3 0x00 01:691 00:056 AAPL: #[EB|WL] 0 0 0x01 0x01 4 0x00 01:748 00:056 AAPL: #[EB|BRD:NV] Mac-CFF7D910A743CAAF 01:804 00:056 AAPL: #[EB|WL] 0 0 0x01 0x01 5 0x00 01:860 00:056 AAPL: #[EB.H.CHK|BM] 0x0000000000000000 01:917 00:056 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82 01:973 00:056 AAPL: #[EB|WL] 0 0 0x01 0x01 23 0x0E 02:029 00:056 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82 02:086 00:056 AAPL: #[EB|WL] 0 0 0x01 0x01 24 0x0E 02:142 00:056 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-image 7C436110-AB2A-4BBB-A880-FE41995C9F82 02:199 00:056 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82 02:255 00:056 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82 02:312 00:056 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-image 7C436110-AB2A-4BBB-A880-FE41995C9F82 02:368 00:056 AAPL: #[EB|H:NOT] 02:424 00:056 AAPL: #[EB|SB:P] 0x1 02:481 00:056 AAPL: #[EB.B.MN|BM:+SB] 02:537 00:056 AAPL: #[EB|LIMG:DP] Acpi(PNP0A03,0)/Pci(17|0)/SATA(0,FFFF)/HD(Part2,SigEF3BF3D3-126B-4C92-B701-DD938770E15A)/VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842) 02:594 00:056 AAPL: #[EB|LIMG:FP] \B768B97A-0227-4B93-BEA7-C1FAEFFB0C31\System\Library\CoreServices\boot.efi 02:940 00:346 AAPL: #[EB|LIMG:OPT] 02:997 00:056 AAPL: #[EB.OPT.LXF|F] <"\\B768B97A-0227-4B93-BEA7-C1FAEFFB0C31\\System\\Library\\CoreServices\\com.apple.Boot.plist"> 03:053 00:055 AAPL: #[EB.LD.LF|IN] 0 1 <"\\B768B97A-0227-4B93-BEA7-C1FAEFFB0C31\\System\\Library\\CoreServices\\com.apple.Boot.plist"> <"0"> 03:109 00:056 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"\\B768B97A-0227-4B93-BEA7-C1FAEFFB0C31\\System\\Library\\CoreServices\\com.apple.Boot.plist"> 03:165 00:056 AAPL: #[EB.OPT.LXF|LF!] Err(0xE) 03:222 00:056 AAPL: #[EB.OPT.LXF|F] <"Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist"> 03:278 00:056 AAPL: #[EB.LD.LF|IN] 0 1 <"Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist"> <"0"> 03:335 00:056 AAPL: #[EB|KF] <""> 03:391 00:056 AAPL: #[EB|MBA:CL] <""> 03:447 00:056 AAPL: #[EB|MBA:NV] <"-v keepsyms=1 slide=170"> 03:504 00:056 AAPL: #[EB|MBA:KF] <""> 03:560 00:056 AAPL: #[EB|MBA:OUT] <"-v keepsyms=1 slide=170 chunklist-security-epoch=0 -chunklist-no-rev2-dev"> 03:617 00:056 AAPL: #[EB|LOG:VERBOSE] 2022-02-16T21:22:57 03:674 00:056 AAPL: #[EB.CSR.S|VAR] 0x00000040 03:730 00:056 AAPL: #[EB|OPT:BM] 0x280102 03:787 00:056 AAPL: #[EB.OPT.LXF|F] <"\\B768B97A-0227-4B93-BEA7-C1FAEFFB0C31\\System\\Library\\CoreServices\\PlatformSupport.plist"> 03:843 00:056 AAPL: #[EB.LD.LF|IN] 0 1 <"\\B768B97A-0227-4B93-BEA7-C1FAEFFB0C31\\System\\Library\\CoreServices\\PlatformSupport.plist"> <"0"> 03:900 00:057 AAPL: #[EB|P:CPR] N 03:956 00:056 AAPL: #[EB|P:MPI] N 04:012 00:056 AAPL: #[EB|P:BPI] N 04:068 00:056 AAPL: #[EB|KMR] 216113152 04:125 00:056 AAPL: #[EB.CS.CSKSD|+] 04:181 00:056 AAPL: #[EB.CS.CSKSD|!] Err(0xE) <- RT.GV boot-info-payload 8D63D4FE-BD3C-4AAD-881D-86FD974BC1DF 04:237 00:056 AAPL: #[EB|WL] 0 0 0x01 0x01 6 0x0E 04:293 00:056 AAPL: #[EB.CS.LFC|+] 04:349 00:056 AAPL: #[EB.LD.LF|IN] 0 1 <"System\\Library\\Caches\\com.apple.corestorage\\EncryptedRoot.plist.wipekey"> <"0"> 04:414 00:064 AAPL: #[EB.FS.AGSVH|PU] B768B97A-0227-4B93-BEA7-C1FAEFFB0C31 04:470 00:055 AAPL: #[EB.FS.AGSVH|!] Err(0xE) <- BS.LocHB 59D76AE4-37E3-55A7-B460-EF13D46E6020 04:526 00:055 AAPL: #[EB.G.CS|-?] Ok(0) 04:583 00:056 AAPL: #[EB.LD.LF|IN] 0 1 <"<null string>"> <"1"> 04:642 00:058 AAPL: #[EB.B.SBS|SZ] 727608 04:704 00:062 AAPL: #[EB|B:SHA] <807ed9ab9a8409a4f3362a9d4fc438fa4ca48018> 04:761 00:057 AAPL: #[EB.WL.PWLFNV|!] Err(0xE) <- RT.GV wake-failure 7C436110-AB2A-4BBB-A880-FE41995C9F82 04:818 00:056 AAPL: #[EB.WL.DT|!] Err(0xE) <- EB.WL.PWLFNV 04:874 00:056 AAPL: #[EB.WL.PWLFRTC|NONE] 04:931 00:057 AAPL: #[EB.WL.DT|!] Err(0xE) <- EB.WL.PWLFRTC 04:989 00:057 AAPL: #[EB.LD.LKC|D] <"boot\System\Library\KernelCollections\BootKernelExtensions.kc.development"> 05:047 00:057 AAPL: #[EB.LD.LF|IN] 0 1 <"boot\\System\\Library\\KernelCollections\\BootKernelExtensions.kc.development"> <"0"> 05:107 00:059 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"boot\\System\\Library\\KernelCollections\\BootKernelExtensions.kc.development"> 05:164 00:057 AAPL: #[EB.LD.LKC|R.2] <"boot\System\Library\KernelCollections\BootKernelExtensions.kc"> 05:221 00:057 AAPL: #[EB.LD.LF|IN] 0 1 <"boot\\System\\Library\\KernelCollections\\BootKernelExtensions.kc"> <"0"> 06:241 01:019 AAPL: #[EB|SB:P] 0x1 06:307 00:066 AAPL: #[EB|SB:SBGMFNS] j185ap.im4m 06:365 00:057 AAPL: #[EB|SB:MF] boot\\System\\Library\\KernelCollections\\BootKernelExtensions.kc.j185ap.im4m 06:423 00:057 AAPL: #[EB.LD.LF|IN] 0 1 <"boot\\System\\Library\\KernelCollections\\BootKernelExtensions.kc.j185ap.im4m"> <"0"> 06:619 00:196 AAPL: #[EB|SB:MKRN] 06:682 00:062 AAPL: #[EB.LD.LKFS|-?] Ok(0) 06:739 00:056 AAPL: #[EB.LD.LKC|-?] Ok(0) 06:796 00:056 AAPL: #[EB|BST:REV1] 06:852 00:056 AAPL: #[EB|CSR:OUT] 0x00000040 06:908 00:056 AAPL: #[EB.BST.FBS|+] 06:965 00:057 AAPL: #[EB.BST.FBS|ADSZ] 0 07:022 00:056 AAPL: #[EB.BST.FBS|KSSZ] 0 07:079 00:056 AAPL: #[EB|SB:SBGMFNS] j185ap.im4m 07:135 00:056 AAPL: #[EB|RH:PF] usr\standalone\OS.dmg.root_hash 07:193 00:057 AAPL: #[EB|RH:MF] <"usr\\standalone\\OS.dmg.root_hash.j185ap.im4m"> 07:250 00:056 AAPL: #[EB.LD.LF|IN] 0 1 <"usr\\standalone\\OS.dmg.root_hash"> <"0"> 07:310 00:060 AAPL: #[EB.LD.LF|IN] 0 1 <"usr\\standalone\\OS.dmg.root_hash.j185ap.im4m"> <"0"> 07:368 00:057 AAPL: #[EB.BST.FBS|RHPSZ] 229 07:779 00:411 AAPL: #[EB.BST.FBS|RHMSZ] 3626 07:836 00:056 AAPL: #[EB|LOG:DT] 2022-02-16T21:23:01 07:892 00:056 AAPL: #[EB|LOG:EXITBS:START] 2022-02-16T21:23:01 Quote Link to comment Share on other sites More sharing options...
MaLd0n Posted February 17, 2022 Share Posted February 17, 2022 Use EFI folder from link bellowhttps://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/ Check tutorialhttps://www.olarila.com/topic/20908-guide-easy-fast-and-perfect-hackintosh-vanilla-step-by-step-clover-and-opencore-bootloader/ Some Basic Information -Use USB2 port for easy installation with no remap USB -Delete old EFI folder and paste new. Don't use merge files -Don't use Drag and Drop into EFI partition. Use Copy/Paste instead -Reset NVRAM one time - OpenCore use entry "Reset Nvram" / Clover use F11 key on boot screen Bios/UEFI Configuration -Sata = AHCI mode -Secure Boot = Disable if need -CSM = Disable with AMD cards -If you have only IGPU use -igfxvesa bootarg for easy installation Quote Link to comment Share on other sites More sharing options...
john jairo garcia garcia Posted February 20, 2022 Author Share Posted February 20, 2022 hello friend, I have tried everything in the tutorial. but the pc always stays in the apple and does not go up to install. On 2/17/2022 at 11:02 AM, MaLd0n said: Use EFI folder from link bellowhttps://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/ Check tutorialhttps://www.olarila.com/topic/20908-guide-easy-fast-and-perfect-hackintosh-vanilla-step-by-step-clover-and-opencore-bootloader/ Some Basic Information -Use USB2 port for easy installation with no remap USB -Delete old EFI folder and paste new. Don't use merge files -Don't use Drag and Drop into EFI partition. Use Copy/Paste instead -Reset NVRAM one time - OpenCore use entry "Reset Nvram" / Clover use F11 key on boot screen Bios/UEFI Configuration -Sata = AHCI mode -Secure Boot = Disable if need -CSM = Disable with AMD cards -If you have only IGPU use -igfxvesa bootarg for easy installation Quote Link to comment Share on other sites More sharing options...
MaLd0n Posted February 20, 2022 Share Posted February 20, 2022 post one photo in error screen Quote Link to comment Share on other sites More sharing options...
john jairo garcia garcia Posted February 20, 2022 Author Share Posted February 20, 2022 3 hours ago, MaLd0n said: post one photo in error screen Quote Link to comment Share on other sites More sharing options...
MaLd0n Posted February 20, 2022 Share Posted February 20, 2022 2 hours ago, john jairo garcia garcia said: just use correct folder https://tinyurl.com/ecar44y5 Quote Link to comment Share on other sites More sharing options...
john jairo garcia garcia Posted February 20, 2022 Author Share Posted February 20, 2022 32 minutes ago, MaLd0n said: solo usa la carpeta correcta https://tinyurl.com/ecar44y5 friend with this folder I don't recognize anything on the usb. why can this happen? Quote Link to comment Share on other sites More sharing options...
MaLd0n Posted February 20, 2022 Share Posted February 20, 2022 7 minutes ago, john jairo garcia garcia said: friend with this folder I don't recognize anything on the usb. why can this happen? u need a correct procedure bios/uefi in default, disable only csm if have amd gpu delete old efi folder and paste new. dont merge files. dont use drag and drop into efi partition, use copy/paste instead Check here https://www.olarila.com/topic/12857-hackintosh-how-to-mount-efi-partition-on-macos-or-windows/ Quote Link to comment Share on other sites More sharing options...
john jairo garcia garcia Posted February 21, 2022 Author Share Posted February 21, 2022 (edited) Hace 7 horas, MaLd0n dijo: necesitas un procedimiento correcto bios/uefi por defecto, deshabilite solo csm si tiene amd gpu elimine la carpeta efi anterior y pegue la nueva. no fusionar archivos. no use arrastrar y soltar en la partición efi, use copiar / pegar en su lugar Consulte aquí https://www.olarila.com/topic/12857-hackintosh-how-to-mount-efi-partition-on-macos-or-windows/ Thank you it has worked, I updated the bios of my board and it works, as I can see my windows disk, and how to remove it so that I don't get the letters at the beginning of the mac. Edited February 21, 2022 by john jairo garcia garcia Quote Link to comment Share on other sites More sharing options...
john jairo garcia garcia Posted February 28, 2022 Author Share Posted February 28, 2022 (edited) On 2/20/2022 at 4:20 PM, MaLd0n said: u need a correct procedure bios/uefi in default, disable only csm if have amd gpu delete old efi folder and paste new. dont merge files. dont use drag and drop into efi partition, use copy/paste instead Check here https://www.olarila.com/topic/12857-hackintosh-how-to-mount-efi-partition-on-macos-or-windows/ please help how can i view my windows disk in the menu Edited February 28, 2022 by john jairo garcia garcia Quote Link to comment Share on other sites More sharing options...
Anto65 Posted February 28, 2022 Share Posted February 28, 2022 Verify that ScanPolicy is set to 0 Quote Link to comment Share on other sites More sharing options...
MaLd0n Posted February 28, 2022 Share Posted February 28, 2022 3 hours ago, john jairo garcia garcia said: please help how can i view my windows disk in the menu here EFI 02.zip Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.