PMheart Posted August 27, 2019 Share Posted August 27, 2019 33 minutes ago, hardcorehenry said: Sorry @PMheart , but I think this fragment has to be corrected: call in XNU kernel. Normally it is only the value of \texttt{EAX} that needs to be taken care of, which represents the exact CPUID. And the remainders are to be left as zeroes. For instance, \texttt{A9 06 03 00} stands for CPUID \texttt{0x0306A9} (Ivy Bridge). A good example can be found at \href{https://github.com/acidanthera/bugtracker/issues/365}{acidanthera/bugtracker\#365}. (See \texttt{Special NOTES for Haswell+ low-end}) I used to boot my Intel Pentium Haswell with fake CPUID Ivy Bridge 0x0306A0 Hello, Sorry, I didn't quite catch that. Could you please point out the changes that I am supposed to handle? Thanks! Link to comment Share on other sites More sharing options...
hardcorehenry Posted August 27, 2019 Share Posted August 27, 2019 (edited) "For instance, \texttt{A0 06 03 00} stands for CPUID \texttt{0x0306A0} (Ivy Bridge)" , thou I'm not using fake CPUID in favor of cpu family kernel patch(VDA decoding), it was the only fake CPUID I was able to boot my hackintosh Edited August 27, 2019 by hardcorehenry Link to comment Share on other sites More sharing options...
Sniki Posted August 27, 2019 Share Posted August 27, 2019 (edited) 2 hours ago, vit9696 said: does not even look like a CFG Lock (or any MSR stuff), more like dereferencing null pointer. Perhaps you should consider looking somewhere else. Thanks @vit9696 Do you have any suggestions/hint on where the problem could be ? I checked configuration.pdf many times but can't find any reference related to this problem Any idea ? I had the OC folder attached as well, Let me know if you need more files/logs for troubleshooting. Edited August 27, 2019 by Sniki Link to comment Share on other sites More sharing options...
tmbt Posted August 27, 2019 Share Posted August 27, 2019 (edited) 5 hours ago, tunglamvghy1210 said: I've the same issue but it stop booting. Have you fix it yet? Yes it seems the problem was Rehabman version of voodoops2. Now i'm using Acidanthera version and the error is gone : https://github.com/acidanthera/VoodooPS2 Mattia Edited August 27, 2019 by tmbt writing error Link to comment Share on other sites More sharing options...
canyondust Posted August 27, 2019 Share Posted August 27, 2019 5 minutes ago, bronxteck said: I did not try re enabling sip as. it does not bother me being disabled I ran SIP disabled for 3 years, and decided to enable it when I moved to OC. The only difference has been theoretical Link to comment Share on other sites More sharing options...
D-an-W Posted August 27, 2019 Share Posted August 27, 2019 Would anyone know the decimal number to use to in Scan Policy to enable USB scanning but not show EFI please? I currently have it set at 0 which works but also shows EFI, I also tried 5,177,603 but that didn't show any more and also gave an error before the boot selector screen. 1 Link to comment Share on other sites More sharing options...
bronxteck Posted August 27, 2019 Share Posted August 27, 2019 (edited) 11 hours ago, STLVNUB said: Can you please share your OC, mine does nothing all i did was use opencore configurator made a new config disabled anything that was default in all option menus. in smbios i just populated the generic section with the info i needed changed like serial and had to put a mac identifier if not OC defaults to mac pro 6,1 i selected all the check mark options across the bottom and set auto to auto instead of create. the other thing it needed was applepolicy checked like i explained in my previous post. i am not using any drivers or kexts just config with the smbios info i want changed deleted everything else oh and i set the gui text mode stuff for the bootpicker Edited August 27, 2019 by bronxteck Link to comment Share on other sites More sharing options...
canyondust Posted August 27, 2019 Share Posted August 27, 2019 2 hours ago, D-an-W said: Would anyone know the decimal number to use to in Scan Policy to enable USB scanning but not show EFI please? I currently have it set at 0 which works but also shows EFI, I also tried 5,177,603 but that didn't show any more and also gave an error before the boot selector screen. Try 3080451 (default + USB) Or 2818307 (default + USB - SCSI) Do people still use SCSI? (Really?) 1 Link to comment Share on other sites More sharing options...
STLVNUB Posted August 27, 2019 Share Posted August 27, 2019 (edited) 1 hour ago, bronxteck said: all i did was use opencore configurator made a new config disabled anything that was default in all option menus. in smbios i just populated the generic section with the info i needed changed like serial and had to put a mac identifier if not OC defaults to mac pro 6,1 i selected all the check mark options across the bottom and set auto to auto instead of create. the other thing it needed was applepolicy checked like i explained in my previous post. i am not using any drivers or kexts just config with the smbios info i want changed deleted everything else oh and i set the gui text mode stuff for the bootpicker Ok, I used DEBUG version, maybe that exasperated the problem THANKS edit: I'm a lazy SOAB, could you please give me your OC without serial etc. Edited August 27, 2019 by STLVNUB Link to comment Share on other sites More sharing options...
bronxteck Posted August 27, 2019 Share Posted August 27, 2019 when I get home I guess. that's funny because the only thing my config is being used for is the serial number LOL. my SMC was replaced and it came with no serial. that's the reason I attempted to try OC on the iMac. apple serializer is too old to run on my machine to fix the issue and I already closed the machine so can't dump then edit and re upload the rom. unless serializer can be modified to run on new systems. Link to comment Share on other sites More sharing options...
STLVNUB Posted August 27, 2019 Share Posted August 27, 2019 (edited) 1 hour ago, bronxteck said: when I get home I guess. that's funny because the only thing my config is being used for is the serial number LOL. my SMC was replaced and it came with no serial. that's the reason I attempted to try OC on the iMac. apple serializer is too old to run on my machine to fix the issue and I already closed the machine so can't dump then edit and re upload the rom. unless serializer can be modified to run on new systems. All good, sorted it out myself, thanks for your help edit: still no go, what you using it on. Stick with Clover for time being. Edited August 27, 2019 by STLVNUB Link to comment Share on other sites More sharing options...
D-an-W Posted August 27, 2019 Share Posted August 27, 2019 2 hours ago, canyondust said: Try 3080451 (default + USB) Or 2818307 (default + USB - SCSI) Do people still use SCSI? (Really?) Neither works, just gives an error "OCS: Failed to parse real field of type 1" on the screen before the boot picker and no additional entries. Will stick to 0 for now. Link to comment Share on other sites More sharing options...
Pavo Posted August 27, 2019 Share Posted August 27, 2019 3 hours ago, bronxteck said: all i did was use opencore configurator made a new config disabled anything that was default in all option menus. in smbios i just populated the generic section with the info i needed changed like serial and had to put a mac identifier if not OC defaults to mac pro 6,1 i selected all the check mark options across the bottom and set auto to auto instead of create. the other thing it needed was applepolicy checked like i explained in my previous post. i am not using any drivers or kexts just config with the smbios info i want changed deleted everything else oh and i set the gui text mode stuff for the bootpicker You should not be using any OpenCore configurator right now, none of them work properly for creating a proper config. Plain and simple. Link to comment Share on other sites More sharing options...
STLVNUB Posted August 27, 2019 Share Posted August 27, 2019 1 minute ago, Pavo said: You should not be using any OpenCore configurator right now, none of them work properly for creating a proper config. Plain and simple. Did you read it??? We using it on Apple, no real need for ANY config Link to comment Share on other sites More sharing options...
Hackintosh Tech Posted August 27, 2019 Share Posted August 27, 2019 Anyone had issues with boot up times with Opencore, on the Left is Clover and the right is opencore. the difference is annoying. https://youtu.be/tQ6Z3tP999M Link to comment Share on other sites More sharing options...
canyondust Posted August 27, 2019 Share Posted August 27, 2019 2 hours ago, D-an-W said: Neither works, just gives an error "OCS: Failed to parse real field of type 1" on the screen before the boot picker and no additional entries. Will stick to 0 for now. Interesting. I used the old pdf. I’ll double check that the bitmap hasn’t changed. Link to comment Share on other sites More sharing options...
canyondust Posted August 27, 2019 Share Posted August 27, 2019 (edited) 3 hours ago, D-an-W said: Neither works, just gives an error "OCS: Failed to parse real field of type 1" on the screen before the boot picker and no additional entries. Will stick to 0 for now. Try 3080963 (default + usb + hfs) EDIT: Or 2687750 (Scan FS Lock, Scan Device Lock, Allow APFS, Allow HFS, Allow Sata, Allow NMVE, Allow USB) Edited August 27, 2019 by canyondust 1 1 Link to comment Share on other sites More sharing options...
PMheart Posted August 28, 2019 Share Posted August 28, 2019 14 hours ago, hardcorehenry said: "For instance, \texttt{A0 06 03 00} stands for CPUID \texttt{0x0306A0} (Ivy Bridge)" , thou I'm not using fake CPUID in favor of cpu family kernel patch(VDA decoding), it was the only fake CPUID I was able to boot my hackintosh Sorry for my stupidness. I still didn't get it. Might you want to make this patch a quirk or? 1 Link to comment Share on other sites More sharing options...
mhaeuser Posted August 28, 2019 Share Posted August 28, 2019 @D-an-W as the error says, you end up having a *real* field, so remove punctuation 1 Link to comment Share on other sites More sharing options...
D-an-W Posted August 28, 2019 Share Posted August 28, 2019 1 hour ago, Download-Fritz said: @D-an-W as the error says, you end up having a *real* field, so remove punctuation Good morning @Download-Fritz I assume that means the commas I put in there to make it look the same as before I changed it? For example I entered 5,177,603 and should have maybe just typed 5177603? Link to comment Share on other sites More sharing options...
hardcorehenry Posted August 28, 2019 Share Posted August 28, 2019 6 hours ago, PMheart said: Sorry for my stupidness. I still didn't get it. Might you want to make this patch a quirk or? Sorry for not being precise, I meant there's probably misprint Ivy Bridge is 0x0306A0 not 0x0306A9. Sorry for the confusion I made. Link to comment Share on other sites More sharing options...
D-an-W Posted August 28, 2019 Share Posted August 28, 2019 7 hours ago, canyondust said: Try 3080963 (default + usb + hfs) EDIT: Or 2687750 (Scan FS Lock, Scan Device Lock, Allow APFS, Allow HFS, Allow Sata, Allow NMVE, Allow USB) BINGO! 3080963 did the trick along with the tip from @Download-Fritz as I was wrongly add the commas but should just have let Xcode do that for me. Many thanks @canyondust & @Download-Fritz 1 Link to comment Share on other sites More sharing options...
bronxteck Posted August 28, 2019 Share Posted August 28, 2019 (edited) On 8/27/2019 at 4:36 PM, STLVNUB said: All good, sorted it out myself, thanks for your help edit: still no go, what you using it on. Stick with Clover for time being. ok here it goes EFI.zip looks like you have to re bless OC after apple updates. sudo bless --device /dev/disk0s1 --file BOOTx64.efi --setBoot Edited August 28, 2019 by bronxteck 1 Link to comment Share on other sites More sharing options...
STLVNUB Posted August 29, 2019 Share Posted August 29, 2019 20 hours ago, bronxteck said: ok here it goes EFI.zip looks like you have to re bless OC after apple updates. sudo bless --device /dev/disk0s1 --file BOOTx64.efi --setBoot Thanks Link to comment Share on other sites More sharing options...
STLVNUB Posted August 29, 2019 Share Posted August 29, 2019 Wow. Why does OC work on iMac10,1 but don't on my Hackintosh Link to comment Share on other sites More sharing options...
Recommended Posts