deeveedee Posted January 12, 2021 Share Posted January 12, 2021 (edited) This is a OC noob question... When testing CLOVER with a revised config.plist, I enjoyed the option to manually select the config.plist at boot time. This allowed me to retain a stable, working config.plist baseline in EFI/CLOVER, so that if my revised config.plist caused a boot failure, I could easily revert to the working baseline config.plist without having to boot from a different EFI volume. Does OC offer a similar manual selection of the config.plist, so that I can retain multiple config.plist versions in EFI/OC, including a stable, working baseline config.plist? Edited January 12, 2021 by tonyx86 Link to comment Share on other sites More sharing options...
MacNB Posted January 12, 2021 Share Posted January 12, 2021 (edited) 42 minutes ago, tonyx86 said: This is a OC noob question... When testing CLOVER with a revised config.plist, I enjoyed the option to manually select the config.plist at boot time. This allowed me to retain a stable, working config.plist baseline in EFI/CLOVER, so that if my revised config.plist caused a boot failure, I could easily revert to the working baseline config.plist without having to boot from a different EFI volume. Does OC offer a similar manual selection of the config.plist, so that I can retain multiple config.plist versions in EFI/OC, including a stable, working baseline config.plist? No. Keep a USB OC stick with a working config handy. Workaround : if you can get into OC Shell from the OC boot menu, then you can use shell commands to to navigate to the the EFI/OC folder and rename the filename of your working backup copy of the config to config.plist. Edited January 12, 2021 by MacNB 1 Link to comment Share on other sites More sharing options...
deeveedee Posted January 12, 2021 Share Posted January 12, 2021 Thanks - I currently do the test with the USB stick and keep the working baseline on my SSD. Not difficult - just wondering. Link to comment Share on other sites More sharing options...
H4cktosh Posted January 13, 2021 Share Posted January 13, 2021 17 hours ago, 5T33Z0 said: I am getting the same error. You could try this app: thx sir this is what i need for 1 Link to comment Share on other sites More sharing options...
Sherlocks Posted January 16, 2021 Share Posted January 16, 2021 (edited) Anyone who has this issue about AllowSetDefault? when used previous macOS version(11.0), there is no problem. but since update 11.1 beta1, in bootpicker, press ctrl+number, then boot macOS, and check nvram -p, there is no autostart(?) nvram key. restart system, no default boot partition that i pressed it. my laptop use latest OC version(last commit) with native nvram. Edited January 16, 2021 by Sherlocks Link to comment Share on other sites More sharing options...
mhaeuser Posted January 16, 2021 Share Posted January 16, 2021 2 hours ago, Sherlocks said: but since update 11.1 beta1, in bootpicker, press ctrl+number, then boot macOS, and check nvram -p, there is no autostart(?) nvram key. Default entry is not in the Apple GUID. 2 hours ago, Sherlocks said: restart system, no default boot partition that i pressed it. What is anyone supposed to do without a log? Link to comment Share on other sites More sharing options...
Sherlocks Posted January 16, 2021 Share Posted January 16, 2021 29 minutes ago, Download-Fritz said: Default entry is not in the Apple GUID. What is anyone supposed to do without a log? here is log opencore-2021-01-16-153841.txt process 1. nvram reset 2. got bootpicker, and ctrl+2(my macOS partition), then get OC log file. and get nvram keys sherlocks@Sherlocksui-MacBookPro ~ % nvram -p prev-lang:kbd ko:252 bluetoothActiveControllerInfo z%e0%89%04%00%00%00%00@%14%ac%d1%b8%e2%a4%d0 backlight-level i%05 SystemAudioVolume F run-efi-updater No%00 csr-active-config g%00%00%00 boot-args keepsyms=1 applbkl=0 sherlocks@Sherlocksui-MacBookPro ~ % Link to comment Share on other sites More sharing options...
mhaeuser Posted January 16, 2021 Share Posted January 16, 2021 2 hours ago, Sherlocks said: here is log opencore-2021-01-16-153841.txt 256 kB · 1 download There is nothing regarding set default at all, probably your config and/or hotkey support is broken. 2 hours ago, Sherlocks said: and get nvram keys 2 hours ago, Download-Fritz said: Default entry is not in the Apple GUID. Read... Link to comment Share on other sites More sharing options...
Andrey1970 Posted January 17, 2021 Share Posted January 17, 2021 8 hours ago, Sherlocks said: here is log opencore-2021-01-16-153841.txt 256 kB · 4 downloads process 1. nvram reset 2. got bootpicker, and ctrl+2(my macOS partition), then get OC log file. and get nvram keys sherlocks@Sherlocksui-MacBookPro ~ % nvram -p prev-lang:kbd ko:252 bluetoothActiveControllerInfo z%e0%89%04%00%00%00%00@%14%ac%d1%b8%e2%a4%d0 backlight-level i%05 SystemAudioVolume F run-efi-updater No%00 csr-active-config g%00%00%00 boot-args keepsyms=1 applbkl=0 sherlocks@Sherlocksui-MacBookPro ~ % 00:466 00:007 OC: Driver OpenCanopy.efi at 7 is successfully loaded! OpenCanopy never supported index keys. Use ctrl+enter. 2 Link to comment Share on other sites More sharing options...
Sherlocks Posted January 17, 2021 Share Posted January 17, 2021 (edited) 1 hour ago, Andrey1970 said: 00:466 00:007 OC: Driver OpenCanopy.efi at 7 is successfully loaded! OpenCanopy never supported index keys. Use ctrl+enter. it's is not working. opencore-2021-01-17-020803.txt Last login: Sun Jan 17 11:08:54 on console sherlocks@Sherlocksui-MacBookPro ~ % nvram -p prev-lang:kbd ko:252 fmm-computer-name Sherlocks%ec%9d%98 MacBook%c2%a0Pro SystemAudioVolumeDB %db backlight-level i%05 run-efi-updater No%00 SystemAudioVolume %25 bluetoothActiveControllerInfo z%e0%89%04%00%00%00%00@%14%ac%d1%b8%e2%a4%d0 csr-active-config g%00%00%00 boot-args keepsyms=1 applbkl=0 sherlocks@Sherlocksui-MacBookPro ~ % EDIT1. i tested keys on keyboard in keytester.efi. i can input key except ctrl, fn, windowskey, alt, shift key. EDIT2. in keytester, ctrl + 1, showing keytester : Edited January 17, 2021 by Sherlocks Link to comment Share on other sites More sharing options...
cyrhex Posted January 17, 2021 Share Posted January 17, 2021 weird my macos mojave 10.14.6 it wont boot using OC 0.6.5 but it boots fine under bigsur 11.0.1,,had no boot issue using OC 0.6.3...specs pentium g5400,sapphire rx 570,ga-h310m h 2.0 Link to comment Share on other sites More sharing options...
bronxteck Posted January 17, 2021 Share Posted January 17, 2021 Sherlocks have you tried using system preferences / startup disk prefpane so that mac os re-blesses the volume you want to boot default? Link to comment Share on other sites More sharing options...
Sherlocks Posted January 17, 2021 Share Posted January 17, 2021 Sherlocks have you tried using system preferences / startup disk prefpane so that mac os re-blesses the volume you want to boot default?it is working that you mentioned for me in macOS.But i want to easily use ctrl + index in Bootpicker.Sent from my SM-N960N using Tapatalk Link to comment Share on other sites More sharing options...
deeveedee Posted January 17, 2021 Share Posted January 17, 2021 Not sure I completely understand your ctrl + index requirement, but ctrl + enter works fine. In OC 0.6.5, if I clear NVRAM, I can always restore my default boot option by using ctrl + enter in the Bootpicker. Then during subsequent boots, the selection that I "ctrl + entered" is always chosen by default. Link to comment Share on other sites More sharing options...
Sherlocks Posted January 17, 2021 Share Posted January 17, 2021 Not sure I completely understand your ctrl + index requirement, but ctrl + enter works fine. In OC 0.6.5, if I clear NVRAM, I can always restore my default boot option by using ctrl + enter in the Bootpicker. Then during subsequent boots, the selection that I "ctrl + entered" is always chosen by default.can you show me nvram -p result in terminal?did you use opencanopy?Sent from my SM-N960N using Tapatalk Link to comment Share on other sites More sharing options...
eSaF Posted January 17, 2021 Share Posted January 17, 2021 20 minutes ago, tonyx86 said: ctrl + enter works fine. In OC 0.6.5, if I clear NVRAM, I can always restore my default boot option by using ctrl + enter in the Bootpicker. Then during subsequent boots, the selection that I "ctrl + entered" is always chosen by default. @Sherlocks - Absolutely!!! This is how it is on my machine also (using Opencanopy in OC 0.6.6). 2 Link to comment Share on other sites More sharing options...
deeveedee Posted January 17, 2021 Share Posted January 17, 2021 27 minutes ago, Sherlocks said: can you show me nvram -p result in terminal? did you use opencanopy? I'm not using opencanopy. My complete OC 0.6.5 EFI is attached to the first post in my rig's thread here. nvram -p Spoiler tony@Tonys-Mac-mini ~ % nvram -p boot-args keepsyms=1 darkwake=2 igfxonln=1 igfxagdc=0 rtcfx_exclude=B0-B3,B7 run-efi-updater No%00 prev-lang:kbd en-US:0%00 fmm-computer-name Tony%e2%80%99s Mac mini SystemAudioVolume F csr-active-config %00%00%00%00 Link to comment Share on other sites More sharing options...
Sherlocks Posted January 17, 2021 Share Posted January 17, 2021 There is nothing regarding set default at all, probably your config and/or hotkey support is broken. Read... [mention=895511]Download-Fritz[/mention] [mention=1135927]vit9696[/mention] okay. here is summary about my issue. UEFI - Input - KeySupportMode. Auto : probably my system chosen V2. but cursor is freeze after cursor moved 3 times over quickly or normally. both ctrl + index and enter is working. i can use "AllowSetDefault" V1: cursor is not freeze, both ctrl + index and enter isn't working. i never use "AllowSetDefault". i tried it at many times V2: cursor is freeze after cursor moved 3 times over quickly or normally. both ctrl + index and enter is working. i can use "AllowSetDefault" AMI: everything is not working. i can't type any keys in bootpicker. can i use both V1 and "AllowSetDefault" option without freezing?orany tips for V2 and "AllowSetDefault" without freezing? thanks in advance Link to comment Share on other sites More sharing options...
eSaF Posted January 17, 2021 Share Posted January 17, 2021 @Sherlocks - I don't know if this is pertaining to the query you're describing but this is how those settings are in my config.plist. Spoiler Link to comment Share on other sites More sharing options...
Stefanalmare Posted January 17, 2021 Share Posted January 17, 2021 Hi all! I have at home 2 old PCs and I started for fun to BS Hackintosh them. HP xw4600 (Intel core2 quad q9300, 8GB DDR2 SDRAM, RX470 NITRO+) works like a dream with all the mac features ( :) I mean all), but for the other, HP DC7800 (Core2 Duo E7200, HD7750, 8GB DDR2 SDRAM), its impossible to make emulated NVRAM working. In attach: orig tables, IOReg, OC debug, OC folder. Devs, a hand? Thank you! Arhivă.zip Link to comment Share on other sites More sharing options...
Sherlocks Posted January 17, 2021 Share Posted January 17, 2021 [mention=980913]Sherlocks[/mention] - I don't know if this is pertaining to the query you're describing but this is how those settings are in my config.plist. Spoiler yes it is correct.for me, Auto and V2 is no problem. but cursor is freeze after some moved up and down.so i'm using v1 now.Sent from my SM-N960N using Tapatalk 1 Link to comment Share on other sites More sharing options...
deeveedee Posted January 18, 2021 Share Posted January 18, 2021 15 hours ago, Sherlocks said: for me, Auto and V2 is no problem. but cursor is freeze after some moved up and down. so i'm using v1 now. Could this have anything to do with your UIScale? See here. Link to comment Share on other sites More sharing options...
deeveedee Posted January 18, 2021 Share Posted January 18, 2021 20 hours ago, Stefanalmare said: Hi all! I have at home 2 old PCs and I started for fun to BS Hackintosh them. HP xw4600 (Intel core2 quad q9300, 8GB DDR2 SDRAM, RX470 NITRO+) works like a dream with all the mac features ( :) I mean all), but for the other, HP DC7800 (Core2 Duo E7200, HD7750, 8GB DDR2 SDRAM), its impossible to make emulated NVRAM working. In attach: orig tables, IOReg, OC debug, OC folder. Devs, a hand? Thank you! This thread might help. Link to comment Share on other sites More sharing options...
Stefanalmare Posted January 18, 2021 Share Posted January 18, 2021 2 hours ago, tonyx86 said: This thread might help. Thanx man! But my problem is to have nvram, not to install or upgrade. This will be the next step. Link to comment Share on other sites More sharing options...
deeveedee Posted January 18, 2021 Share Posted January 18, 2021 Ok - maybe I'm missing something. Part of that thread was intended to show how to emulate NVRAM and then to provide a work-around for installing Big Sur. Are you saying you followed the Dortania NVRAM emulation and that didn't work for you? Link to comment Share on other sites More sharing options...
Recommended Posts