Tiem Posted June 3, 2020 Share Posted June 3, 2020 25 minutes ago, MacNB said: Does OpenCanopy appear when you set Show_picker = True ? If not, then check your EFI/Resources folder for the Font, Labels & Image folders are not empty. Ya everything works as should but no matter what I set, I can't get the loader to pull up the picker on OPT. PollAppleHotKeys also has no effect, on or off. Link to comment Share on other sites More sharing options...
Sherlocks Posted June 3, 2020 Share Posted June 3, 2020 i switched Clover to OC. everything is fine with OC 0.5.9. i wonder BlacklistAppleUpdate feature. BlacklistAppleUpdate default is true. also i used it. my default boot disk is macos partition in nvram. i trid to update 10.15.6 beta1 from 10.15.5. system reboot and enter update partition in boot picker.u pdate 1stage, then system reboot. in boot picker, forget my default boot disk. only enter 1st disk. i have to enter macos disk with arrow key. can BlacklistAppleUpdate prevent this problem? i think that after 1stage, seems to try update FW. Link to comment Share on other sites More sharing options...
mhaeuser Posted June 3, 2020 Share Posted June 3, 2020 @Sherlocks Currently, yes, unfortunately, it's in the Errata document. A fix will be available soon. 1 Link to comment Share on other sites More sharing options...
tluck Posted June 3, 2020 Share Posted June 3, 2020 14 hours ago, makk said: Thanks tluck! Will give it a try. Do you use DeviceProperties? well yes if needed... for example, i set DualLink=1 etc for my gfx Link to comment Share on other sites More sharing options...
Sherlocks Posted June 3, 2020 Share Posted June 3, 2020 [mention=980913]Sherlocks[/mention] Currently, yes, unfortunately, it's in the Errata document. A fix will be available soon.thanks alot나의 SM-N960N 의 Tapatalk에서 보냄 Link to comment Share on other sites More sharing options...
el_charlie Posted June 3, 2020 Share Posted June 3, 2020 (edited) 13 hours ago, tluck said: my laptop with AUO LCD is prone to glitches and freezes UNLESS i inject the EDID from an LG LCD that works great How did you end up getting a LG display EDID for your hack? What was the rationale? I edited my EDID in my Clover days, but now I'm on OpenCore 0.5.9 and I don't inject the EDID anymore. EDIT: Did you use the Catalina Patcher from dosdude1? So, you still use the Pre-Catalina SMBIOS? because technically we can use a newer smbios and use the vanilla installer. I don't know how to proceed. Edited June 3, 2020 by el_charlie Link to comment Share on other sites More sharing options...
Tiem Posted June 3, 2020 Share Posted June 3, 2020 17 minutes ago, el_charlie said: How did you end up getting a LG display EDID for your hack? What was the rationale? I edited my EDID in my Clover days, but now I'm on OpenCore 0.5.9 and I don't inject the EDID anymore. EDIT: Did you use the Catalina Patcher from dosdude1? So, you still use the Pre-Catalina SMBIOS? because technically we can use a newer smbios and use the vanilla installer. I don't know how to proceed. Hackintool (Displays tab) Link to comment Share on other sites More sharing options...
el_charlie Posted June 3, 2020 Share Posted June 3, 2020 7 minutes ago, Tiem said: Hackintool (Displays tab) I know how to prepare my EDID, the question is how did you come to the conclusion that an LG LCD was the answer? Link to comment Share on other sites More sharing options...
Tiem Posted June 3, 2020 Share Posted June 3, 2020 4 minutes ago, el_charlie said: I know how to prepare my EDID, the question is how did you come to the conclusion that an LG LCD was the answer? I'm assuming probably like the rest of us. Trial and error. He tried it and it worked. Link to comment Share on other sites More sharing options...
Humanate Posted June 3, 2020 Share Posted June 3, 2020 Hi. I am having an issue since 0.5.9, Windows will not boot. I get blue screen with "ACPI_BIOS_ERROR_STOP" My windows installation is on a separate NVME SSD to my macOS installation. If I revert to 0.5.8 all is well and Windows boots. I've attached the 0.5.9 EFI I'm using, could someone have a look? 0.5.9.zip Link to comment Share on other sites More sharing options...
el_charlie Posted June 3, 2020 Share Posted June 3, 2020 17 hours ago, tluck said: And yes, dosdude1 method works with OC to get Mojave/Catalina on HD3000 boxes. see github.com/tluck for my EFI for OC. I tried using the Catalina Patcher from dosdude1 to install on my laptop and the installer freezes and the start of the progress bar. What I'm doing wrong? Do I need to create the USB using the patcher or modify my SMBIOS to boot the vanilla Catalina installer? Link to comment Share on other sites More sharing options...
canyondust Posted June 4, 2020 Share Posted June 4, 2020 @vit9696 just read your 0.5.9 release notes on Dortania. Thank you for the words, and all of the effort you and Acidanthera put into to make and support Open Core. Have a fantastic summer! Link to comment Share on other sites More sharing options...
tluck Posted June 4, 2020 Share Posted June 4, 2020 (edited) 11 hours ago, Tiem said: I'm assuming probably like the rest of us. Trial and error. He tried it and it worked. my son's AUO LCD broke and i replaced with an LG. and besides being a much superior LCD, it didnt have any glitches! So i have another T420 with AUO and it still sucks to look at but with the LG EDID it doesn't freeze up. 6 hours ago, el_charlie said: I tried using the Catalina Patcher from dosdude1 to install on my laptop and the installer freezes and the start of the progress bar. What I'm doing wrong? Do I need to create the USB using the patcher or modify my SMBIOS to boot the vanilla Catalina installer? don't know why it freezes? turn on -v to see what is really going on. So yes. you build a the USB with the dosude1 tool with standard appStore Catalina. my SMBIOS is mbp8,1. format the USB as GPT. Then if you want to boot directly from the USB, just put the same OC (or Clover) EFI onto the ESP of the USB. obviously you need to make made sure the OC bundle is fulling working on macOS (then it will work for an installer too). i did so by switching from Clover to OC. have been using OC for about 3 weeks now, and after the learning curve to get the config right, it works without any issues. Edited June 4, 2020 by tluck Link to comment Share on other sites More sharing options...
Tiem Posted June 4, 2020 Share Posted June 4, 2020 1 hour ago, tluck said: my son's AUO LCD broke and i replaced with an LG. and besides being a much superior LCD, it didnt have any glitches! So i have another T420 with AUO and it still sucks to look at but with the LG EDID it doesn't freeze up. I really wish there was a way and a database for this kind of thing. I hate my display's firmware (LG 850). I have to inject a TB display so macOS knows where to draw the desktop. Without it, windows are restored randomly or placed outside the viewport. Even happens connected to a real Mac. Not to mention the 20m long notice that the display will shutdown soon when you put it sleep is just r/{censored}design Link to comment Share on other sites More sharing options...
subandit Posted June 4, 2020 Share Posted June 4, 2020 in dortania guide it says: Note that you should not add your generated DSDT.aml here, it is already in your firmware. So if present, remove the entry for it in your config.plist and under EFI/OC/ACPI. in my build i need to put DSDT.aml to make sleep working nicely. without dsdt i have instant-wake problem is there anything I miss? OC 0.5.9 - mojave 10.14.6 asus h81m-k i5-4670 rx560 OC.zip Link to comment Share on other sites More sharing options...
hardcorehenry Posted June 4, 2020 Share Posted June 4, 2020 38 minutes ago, subandit said: in dortania guide it says: Note that you should not add your generated DSDT.aml here, it is already in your firmware. So if present, remove the entry for it in your config.plist and under EFI/OC/ACPI. in my build i need to put DSDT.aml to make sleep working nicely. without dsdt i have instant-wake problem is there anything I miss? OC 0.5.9 - mojave 10.14.6 asus h81m-k i5-4670 rx560 OC.zip First, iMac15,1(Haswell+Radeon) is more compatible to your build than iMac14,2(Haswell+Nvidia). Second, for your mobo, I’d remove any USB related kext(USBInjectAll/Map/Ports) and only add power via config.plist>DeviceProperties>Add Link to comment Share on other sites More sharing options...
mhkmichaell Posted June 4, 2020 Share Posted June 4, 2020 Hi @Download-Fritz@vit9696. I think the UnblockFsContent not work in 059. Don’t see my OS disk. On 058 it works perfectly. Link to comment Share on other sites More sharing options...
subandit Posted June 4, 2020 Share Posted June 4, 2020 1 hour ago, hardcorehenry said: First, iMac15,1(Haswell+Radeon) is more compatible to your build than iMac14,2(Haswell+Nvidia). Second, for your mobo, I’d remove any USB related kext(USBInjectAll/Map/Ports) and only add power via config.plist>DeviceProperties>Add thank you for reply ! but somehow i only able to type in capital in those data, so instead of e803 its E803 generate new imac 15,1 dont install usb kexts disabled dsdt in plist. but sleep problem re accure, instant wake to be pricise OC.zip Link to comment Share on other sites More sharing options...
hardcorehenry Posted June 4, 2020 Share Posted June 4, 2020 (edited) 56 minutes ago, subandit said: thank you for reply ! but somehow i only able to type in capital in those data, so instead of e803 its E803 generate new imac 15,1 dont install usb kexts disabled dsdt in plist. but sleep problem re accure, instant wake to be pricise OC.zip Change in DeviceProperties: AAPL,ig-platform-id Data <0b001204> Adding this patches might also help. PATCHES.zip EDIT: You don't need XhciPortLimit Enabled Edited June 4, 2020 by hardcorehenry Link to comment Share on other sites More sharing options...
mhaeuser Posted June 4, 2020 Share Posted June 4, 2020 @mhkmichaell No logs, no support Link to comment Share on other sites More sharing options...
frozenowl Posted June 4, 2020 Share Posted June 4, 2020 On 5/25/2020 at 3:40 AM, ajacocks said: This is my first time using OpenCore, so please forgive any obvious errors. I followed the (very complete) guide at https://dortania.github.io/OpenCore-Desktop-Guide and that answered a lot of questions. However, I am repeatedly not able to get past the error, shown in the attached image. It's the "[EB|#LOG:EXITBS:START]" error, which the guide makes several suggestions to remedy, none of which help me. There is no way to disable CFG-LOCK, so I have enabled AppleXcpmCfgLock and AppleCpuPmCfgLock. My system is a Dell Optiplex 7050 Core i6-6500, with a AMD Radeon R5 340X video card. I've tried every USB port, on the machine, both USB2 and USB3, based on some comments that I have found, online. I've attached my boot log, and EFI folder, here, as well. Thanks for any suggestions! - Alex opencore-2020-05-25-032818.txt EFI.zip //There is no way to disable CFG-LOCK// Try this: https://www.youtube.com/watch?v=W4JXVNJsK98 Fixing your BIOS CFG Lock for the perfect Hackintosh Link to comment Share on other sites More sharing options...
subandit Posted June 4, 2020 Share Posted June 4, 2020 3 hours ago, hardcorehenry said: Change in DeviceProperties: AAPL,ig-platform-id Data <0b001204> Adding this patches might also help. PATCHES.zip EDIT: You don't need XhciPortLimit Enabled now sleep takes longer time, and unable to wake at all should i return to dsdt route, its working smooth actually. but i wonder why dortania dont recommend it OC.zip Link to comment Share on other sites More sharing options...
iCanaro Posted June 4, 2020 Share Posted June 4, 2020 I imagine that if Dortiana says to throw you off a bridge, you do it 1 Link to comment Share on other sites More sharing options...
hardcorehenry Posted June 4, 2020 Share Posted June 4, 2020 8 minutes ago, subandit said: now sleep takes longer time, and unable to wake at all should i return to dsdt route, its working smooth actually. but i wonder why dortania dont recommend it OC.zip This patches and settings are working for my build without issues. If it doesn’t work for you there’s no point of keeping them. Link to comment Share on other sites More sharing options...
subandit Posted June 4, 2020 Share Posted June 4, 2020 1 minute ago, hardcorehenry said: This patches and settings are working for my build without issues. If it doesn’t work for you there’s no point of keeping them. Thank you, even its not working as expected i have learn alot from it. thanks again for your time! Link to comment Share on other sites More sharing options...
Recommended Posts