davidm71 Posted April 20, 2020 Share Posted April 20, 2020 12 hours ago, Andrey1970 said: Simply download OpenCore source code from master and launch macbuild.toolhttps://github.com/acidanthera/OpenCorePkg/archive/master.zip Morning, Thanks for the link. Tried to compile it with XCode but it fails saying there is a lexical or preprocessor issue. Its been a while since I played with XCode but I suppose theres something in build settings that needs to be configured? Thanks Link to comment Share on other sites More sharing options...
FlipBot76 Posted April 20, 2020 Share Posted April 20, 2020 (edited) CPU: Intel Xeon X5680 MB: X58 Boot type: USB OC Legacy OC version: 0.5.7 Failing to boot the macOS installer after first reboot when installing. Anyone seen this error before? (XNU hook) 72:857 00:161 OCB: Performing OcShowSimpleBootMenu... 0 73:015 00:158 OCB: BootNext has not been found 73:175 00:159 OCB: BootOrder is unavailable - Not Found 73:336 00:160 OCB: Initial default is 0, fallback 84:492 11:155 OCB: Should boot from macOS Installer (T:2|F:0|DEF:0) 84:813 00:321 OCB: Perform boot macOS Installer to dp PcieRoot(0x0)/Pci()/Sata()/HD(2,GPT,,,)/\macOS Install Data\Locked Files\Boot Files\boot.efi (0/0) 84:996 00:182 OCB: Matching <> args on type 2 0 85:165 00:168 OCOS: OS set: <null> Mac OS X 10.15 85:326 00:161 OCOS: OS set: Apple Inc. Mac OS X 10.15 85:516 00:189 Trying XNU hook on \macOS Install Data\Locked Files\Boot Files\prelinkedkernel 86:050 00:534 Kext reservation size 7487488 99:463 13:412 Comp kernel (26165004 bytes) cannot be read at 00000000 99:759 00:295 Result of XNU hook on \macOS Install Data\Locked Files\Boot Files\prelinkedkernel is Invalid Parameter 110:953 11:193 OC: Boot failed - Aborted 111:249 00:296 OCB: StartImage failed - Aborted Edited April 20, 2020 by FlipBot76 Link to comment Share on other sites More sharing options...
Pavo Posted April 20, 2020 Share Posted April 20, 2020 13 hours ago, davidm71 said: Xcode complains that I don't have a developer certificate installed so won't compile... Showing Recent Issues No signing certificate "Mac Development" found: No "Mac Development" signing certificate matching team ID "5DG8PLV54H" with a private key was found. Sounds like you are trying to compile OCBuilder app itself. Just download the release and run it. 3 Link to comment Share on other sites More sharing options...
davidm71 Posted April 20, 2020 Share Posted April 20, 2020 Just now, Pavo said: Sounds like you are trying to compile OCBuilder app itself. Just download the release and run it. Unfortunately I can't find the 0.5.8 release. Anyway to overcome the compilation error? Must be something simple.. Thanks Link to comment Share on other sites More sharing options...
Pavo Posted April 20, 2020 Share Posted April 20, 2020 1 minute ago, davidm71 said: Unfortunately I can't find the 0.5.8 release. Anyway to overcome the compilation error? Must be something simple.. Thanks I wasn't talking about OpenCore 0.5.8 release I was talking OCBuilder.app download the release of that and run the app to compile OpenCore 0.5.8 automatically. https://github.com/Pavo-IM/ocbuilder/releases/download/7.2.4/OCBuilder.app.zip Link to comment Share on other sites More sharing options...
davidm71 Posted April 20, 2020 Share Posted April 20, 2020 4 minutes ago, Pavo said: I wasn't talking about OpenCore 0.5.8 release I was talking OCBuilder.app download the release of that and run the app to compile OpenCore 0.5.8 automatically. https://github.com/Pavo-IM/ocbuilder/releases/download/7.2.4/OCBuilder.app.zip Thank you. So much more easier than using XCode. Thanks Link to comment Share on other sites More sharing options...
Andrey1970 Posted April 20, 2020 Share Posted April 20, 2020 1 hour ago, davidm71 said: Morning, Thanks for the link. Tried to compile it with XCode but it fails saying there is a lexical or preprocessor issue. Its been a while since I played with XCode but I suppose theres something in build settings that needs to be configured? Thanks Simply make that that I wrote. You don't need to launch xcode. The third-party utility OCBuilder it isn't necessary. Link to comment Share on other sites More sharing options...
xdnuos Posted April 20, 2020 Share Posted April 20, 2020 (edited) Hello, I converter Clover to OC but when I sleep my laptop can't wake. In clover everything work fine. Spec: i5 3230M + HD4000 only Here is my OC folder OC.zip Edited April 20, 2020 by xdnuos Link to comment Share on other sites More sharing options...
Maf3r0 Posted April 20, 2020 Share Posted April 20, 2020 Please, can anybody help-me to understand how SwapKeys are supposed to work? Eg: By defaul, in my kb, Alt=Option and Win=Comand but I'll do like to leave as real Mac where Alt=Cmd and Win=Opt. Is that possible at OpenCore interface? Because even with SwapKeys=Yes this have no effect to me. Link to comment Share on other sites More sharing options...
topolino1 Posted April 20, 2020 Share Posted April 20, 2020 My computer GA-Z390-M-Gaming. i9 9900K. G. Skill 32GB 3200 MHz DDR4 EFI-OpenCore-0.5.8-DEBUG 2020-04-19 Catalina 10.15.3 1. After resetting nvram, the keyboard and mouse in PickerMode will not work. Is it normal? Similar settings on my other computer Gigabyte GA-Z170, everything works. 2. PickerAudioAssist and appla sound do not work at startup. Settings:: AudioCodec - 2 AudioOut - Testowałe,: -1, 0, 1, 2, 3, 4. I hear nothing. PlayChime - yes Debug fragment: 07:651 00:002 OC: Requested console mode is 0x0 (max: 0) from 07:654 00:002 OCAU: System volume is 0 (calculated from 0) - Success 07:657 00:002 OCAU: Matching PciRoot(0x0)/Pci(0x1F,0x3)/VenMsg(A9003FEB-D806-41DB-A491-5405FEEF46C3,02000000)... 07:697 00:002 OCAU: 1/3 PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x1)/VenMsg(A9003FEB-D806-41DB-A491-5405FEEF46C3,00000000) (6 outputs) - Success 07:738 00:002 OCAU: 2/3 PciRoot(0x0)/Pci(0x1F,0x3)/VenMsg(A9003FEB-D806-41DB-A491-5405FEEF46C3,00000000) (6 outputs) - Success 07:749 00:002 OCAU: 3/3 PciRoot(0x0)/Pci(0x1F,0x3)/VenMsg(A9003FEB-D806-41DB-A491-5405FEEF46C3,02000000) (1 outputs) - Success 07:752 00:002 OCAU: Setting language to en-US:0 07:755 00:002 OCAU: Language for audio en-US:0 - Success 14:236 00:003 OC: Wave Resources\Audio\OCEFIAudio_en_Loading.wav was requested What do I need to add? Similar settings on my other computer Gigabyte GA-Z170, everything works.. 3. I have this problem: When starting, I always get this error: No Arguments are initialised for method [_STA] ACPI Error: Method parse/execution failed [\_TZ.TZ10._STA] (Node ffffff804f171090)), AE_AML_UINITIALIZED_LOCAL (20160938/psparse-632) ACPI Error: Method execution failed [\_TZ.TZ10._STA] (Node ffffff804f171090)), AE_AML_UINITIALIZED_LOCAL (20160938/uteval-183) Someone has a similar problem here, unfortunately I could not find someone to solve this problem. Anyone met with this? What do I need to add? Thanks for the help. Link to comment Share on other sites More sharing options...
davidm71 Posted April 20, 2020 Share Posted April 20, 2020 Hi, Was wondering if there is a tool for creating custom SSDT-EC and SSDT-PLUG AML files Opencore requires? Wonder if Hackintool does that? Second wonder if I have a Kabylake motherboard running a Skylake processor I would suppose I need a readymade version of Skylake SSDT files off of the Opencore guide? THANKS Link to comment Share on other sites More sharing options...
insanefrancis Posted April 20, 2020 Share Posted April 20, 2020 1 minute ago, davidm71 said: Hi, Was wondering if there is a tool for creating custom SSDT-EC and SSDT-PLUG AML files Opencore requires? You can create these with corpnewt's SSDTTime Link to comment Share on other sites More sharing options...
MorenoAv Posted April 20, 2020 Share Posted April 20, 2020 (edited) Or MaciASL, and compile it... Edited April 20, 2020 by MorenoAv 1 Link to comment Share on other sites More sharing options...
davidm71 Posted April 20, 2020 Share Posted April 20, 2020 30 minutes ago, insanefrancis said: You can create these with corpnewt's SSDTTime Wouldn't you know it had it already installed. Just not use all its features. Such as HPET IRQ conflicts. What a great little tool! Thank you Link to comment Share on other sites More sharing options...
nijhawank Posted April 20, 2020 Share Posted April 20, 2020 On 4/18/2020 at 4:01 PM, nijhawank said: I converted my Clover based Catalina installation to OpenCore and everything is perfect. Amazing work by team Acidanthera @Download-Fritz @vit9696 @Andrey1970 However I now tried to upgrade my 10.15.2 installation to 10.15.4 (I’m using the full Installer), the Installer says that my Mac needs a firmware update to install to APFS volume and it asks me to pick a HFS+ partition instead. See the attached screenshot. I can however workaround the problem by choosing Macbookpro14,1 instead of Macbookpro13,1 that I normally use. It seems OpenCore is spoofing / reporting an older Boot ROM when using Macbookpro13,1. My hack is a Lenovo T460 laptop with i5-6300u and is better matched with Macbookpro13,1 but even otherwise the problem of spoofing an older Boot ROM seems to be a bug with OpenCore. I’m using OpenCore 0.5.7. What you all think? @vit9696 @Andrey1970 @Download-Fritz Any thoughts on this? Link to comment Share on other sites More sharing options...
ghost8282 Posted April 20, 2020 Share Posted April 20, 2020 7 hours ago, ghost8282 said: Hello, I have some problem with the boot audio, I'd want to play chime at startup. The setup seems correct, but I have an error in OpenCore log (OCAU: Cannot find specified audio device - Not Found). From Opencore log: 07:634 00:006 OCAU: Matching PciRoot(0x1)/Pci(0x2,0x0)/VenMsg(A9003FEB-D806-41DB-A491-5405FEEF46C3,00000000)... 07:640 00:006 HdaCodecAudioIoGetOutputs(): start 07:647 00:006 HdaCodecGetSupportedPcmRates(): start 07:653 00:006 HdaCodecGetOutputDac(): start 07:659 00:006 HdaCodecGetSupportedPcmRates(): start 07:665 00:006 HdaCodecGetOutputDac(): start 07:671 00:006 HdaCodecGetSupportedPcmRates(): start 07:677 00:006 HdaCodecGetOutputDac(): start 07:683 00:005 HdaCodecGetSupportedPcmRates(): start 07:689 00:006 HdaCodecGetOutputDac(): start 07:695 00:005 OCAU: 1/2 PciRoot(0x0)/Pci(0x1,0x4)/Pci(0x0,0x1)/VenMsg(A9003FEB-D806-41DB-A491-5405FEEF46C3,00000000) (4 outputs) - Success 07:701 00:006 HdaCodecAudioIoGetOutputs(): start 07:707 00:005 HdaCodecGetSupportedPcmRates(): start 07:713 00:005 HdaCodecGetOutputDac(): start 07:719 00:005 HdaCodecGetSupportedPcmRates(): start 07:725 00:006 HdaCodecGetOutputDac(): start 07:732 00:006 HdaCodecGetSupportedPcmRates(): start 07:738 00:006 HdaCodecGetOutputDac(): start 07:744 00:006 HdaCodecGetSupportedPcmRates(): start 07:750 00:006 HdaCodecGetOutputDac(): start 07:756 00:006 HdaCodecGetSupportedPcmRates(): start 07:762 00:006 HdaCodecGetOutputDac(): start 07:768 00:006 HdaCodecGetSupportedPcmRates(): start 07:775 00:006 HdaCodecGetOutputDac(): start 07:781 00:006 HdaCodecGetSupportedPcmRates(): start 07:787 00:006 HdaCodecGetOutputDac(): start 07:793 00:005 OCAU: 2/2 PciRoot(0x0)/Pci(0x2,0x0)/VenMsg(A9003FEB-D806-41DB-A491-5405FEEF46C3,00000000) (7 outputs) - Success 07:799 00:006 OCAU: Cannot find specified audio device - Not Found 07:806 00:006 OC: Audio connection failed - Not Found The 4 outputs device is HDAU from my nvidia gpu card, the 7 outputs device is HDEF from the integrated audio device. From gfxutil -f HDEF: ./gfxutil -f HDEF 00:02.0 8086:1d20 /PCI0@0/HDEF@2 = PciRoot(0x1)/Pci(0x2,0x0) Relevant section of config.plist: <key>Audio</key> <dict> <key>AudioCodec</key> <integer>0</integer> <key>AudioDevice</key> <string>PciRoot(0x1)/Pci(0x2,0x0)</string> <key>AudioOut</key> <integer>0</integer> <key>AudioSupport</key> <true/> <key>MinimumVolume</key> <integer>20</integer> <key>PlayChime</key> <true/> <key>VolumeAmplifier</key> <integer>1000</integer> </dict> ....... <key>Drivers</key> <array> <string>HfsPlusLegacy.efi</string> <string>OpenRuntime.efi</string> <string>UsbMouseDxe.efi</string> <string>AudioDxe.efi</string> <string>OpenCanopy.efi</string> </array> HDEF is Realtek ALC899 (Vendor ID: 0x10EC0899). I tried AudioOut from 0 to 7, same error. I'm able to dump the codec from the OpenShell with HdaCodecDump, see attached. Audio resources are in their place: Not sure why OpenCore is reporting the address PciRoot(0x0)/Pci(0x2,0x0) instead of PciRoot(0x1)/Pci(0x2,0x0) as specified in the config.plist? Do you think is it a bug? I thought to open a github issue for this, but not sure where to place, if in "Bug in OpenCore or KEXTs" or in "Bug in tools or applications", and if this can be classified as a bug...I know vit9696 and all the devs have a lot of work to do and I don't want to make them waste time for nothing. What do you think? Thanks dump.txt Issue solved, thanks to vit9696, here is his reply, I think it can help some other people: https://github.com/acidanthera/bugtracker/issues/864 So I simply changed the address in the config.plist (Audio section) from PciRoot(0x1)/Pci(0x2,0x0) ---> which was the address reported by gfxutil, to PciRoot(0x0)/Pci(0x2,0x0) ---> which is the address seen by opencore, and now chime works good. 1 Link to comment Share on other sites More sharing options...
markl18 Posted April 20, 2020 Share Posted April 20, 2020 (edited) hi does anyone know how to get out of this kp applelpc::notifyplatformaspm registering with plugin with aspm support false panic(cpu 0 caller somebody if there wouldnt be a limit of download pics to 1 mb I would have posted an actual kp @Andrey1970 ti mogeg pomoch Edited April 20, 2020 by markl18 Link to comment Share on other sites More sharing options...
Andrey1970 Posted April 20, 2020 Share Posted April 20, 2020 3 hours ago, nijhawank said: @vit9696 @Andrey1970 @Download-Fritz Any thoughts on this? Check Test_OpenCore-0.5.7-DEBUG.zip 1 1 Link to comment Share on other sites More sharing options...
davidm71 Posted April 21, 2020 Share Posted April 21, 2020 10 hours ago, Pavo said: I wasn't talking about OpenCore 0.5.8 release I was talking OCBuilder.app download the release of that and run the app to compile OpenCore 0.5.8 automatically. https://github.com/Pavo-IM/ocbuilder/releases/download/7.2.4/OCBuilder.app.zip AfpsDriverLoader.efi didn't get compiled and is missing from the build after running that app. Have everything else I think. Link to comment Share on other sites More sharing options...
nijhawank Posted April 21, 2020 Share Posted April 21, 2020 3 hours ago, Andrey1970 said: Check Test_OpenCore-0.5.7-DEBUG.zip Will check and let know. But may I ask what is this? Just a debug build and you expect me to provide the logs or you have made some changes and want me to give a try? Thanks for it. Link to comment Share on other sites More sharing options...
Pavo Posted April 21, 2020 Share Posted April 21, 2020 26 minutes ago, davidm71 said: AfpsDriverLoader.efi didn't get compiled and is missing from the build after running that app. Have everything else I think. Apparently you haven't been keeping up with current development of committed changes to OpenCore, ApfsDriverLoader.efi is no longer created because its built into OpenCore.efi. Please make sure you know what you are doing before submitting an issue. 1 Link to comment Share on other sites More sharing options...
davidm71 Posted April 21, 2020 Share Posted April 21, 2020 1 minute ago, Pavo said: Apparently you haven't been keeping up with current development of committed changes to OpenCore, ApfsDriverLoader.efi is no longer created because its built into OpenCore.efi. Please make sure you know what you are doing before submitting an issue. Sorry trying my best to learn as much as possible. Thank you for taking time to reply. Thank you. 1 Link to comment Share on other sites More sharing options...
Andrey1970 Posted April 21, 2020 Share Posted April 21, 2020 7 minutes ago, nijhawank said: Will check and let know. But may I ask what is this? Just a debug build and you expect me to provide the logs or you have made some changes and want me to give a try? Thanks for it. I made some changes. Simply confirm that the mbp13,1 installation works. 1 Link to comment Share on other sites More sharing options...
ameenjuz Posted April 21, 2020 Share Posted April 21, 2020 25 minutes ago, Andrey1970 said: I made some changes. Simply confirm that the mbp13,1 installation works. Hi Andrey 1970 i have issue AllowSetDefault=true do not work with External GUI when i reache gui it is not select default partition and also not work hide unhide partition using space button please help me i attached config with latest commit changes config.plist Link to comment Share on other sites More sharing options...
Matgen84 Posted April 21, 2020 Share Posted April 21, 2020 @vit9696 Could you tell to me how to use macbuild.tool for building only X64 (I don't need IA32), Please. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts