pitrysha Posted February 6, 2020 Share Posted February 6, 2020 3 hours ago, telepati said: Yes, I did. All Hotkeys working without any problem. I am using my setup like a real Mac now. I don't want to see the boot picker cause I have just one boot drive, here are my settings; PollAppleHotKeys YES ShowPicker NO (if you want to see boot entries start to click multiple times to Opt/Alt button when you saw the Motherboard Logo if doesn't work for you use ESC button) TakeoffDelay 5000 Timeout 0 UsePicker YES KeySupport NO You must add AppleUsbKbDxe.efi driver. That's it. At what point to press? I have Logitech K810 and MX Anywhere 2, the keyboard can affect the keystroke , can set anothe delay no 5000? Link to comment Share on other sites More sharing options...
telepati Posted February 6, 2020 Share Posted February 6, 2020 (edited) 34 minutes ago, pitrysha said: At what point to press? I have Logitech K810 and MX Anywhere 2, the keyboard can affect the keystroke , can set anothe delay no 5000? I already wrote it. When you see Motherboard logo start to press and hold while apple logo comes for Command-R and Command+Opt+P+R Edited February 6, 2020 by telepati Link to comment Share on other sites More sharing options...
skyflying5 Posted February 7, 2020 Share Posted February 7, 2020 (edited) hi, when i choose the boot mac then i stuck at a black screen can somebody help solve it thx config.plist opencore-2020-02-07-072850.txt 00:000 00:000 OCB: Failed to match a default boot option Edited February 7, 2020 by skyflying5 Link to comment Share on other sites More sharing options...
Matgen84 Posted February 7, 2020 Share Posted February 7, 2020 (edited) Hi All guys Since I add a Broadcom card to my Z390 Aorus master config, I can't boot. Reset Nvram in Picker ---> no success Please, help me opencore-2020-02-07-144848.txt Edited February 7, 2020 by Matgen84 1 Link to comment Share on other sites More sharing options...
Smiley1986 Posted February 8, 2020 Share Posted February 8, 2020 (edited) Hi Everybody! I cannot migrate from clover, and I don't understand why. This is an old P8P67 WS Revolution with i7-3370 and a RX 580 Nitro+. I need to go opencore, because the clover crash when I try to load the ApfsDriverLoader.efi. So just have only one way, the opencore. I fixed a lot of memory allocation error, and I so the next step will be the kernel start, but i stuck here. Completly freeze, and I don't know, where can I start finding this problem. This installer with clover boot without any issue (I use OsxAptioFixDrv in clover), so it will be a configuration error, but i couldn't found any solution. Here is my log opencore-2020-02-08-121735.txt and config config.plist Thanks in advance! Edited February 8, 2020 by Smiley1986 Link to comment Share on other sites More sharing options...
nmano Posted February 8, 2020 Share Posted February 8, 2020 (edited) 9 ACPI Sleep patch 9 ACPI patch for sleep config-OC.plist All Intel Motherboard. I test X99,X299. Edited February 8, 2020 by nmano 2 2 Link to comment Share on other sites More sharing options...
nmano Posted February 8, 2020 Share Posted February 8, 2020 On 2/7/2020 at 6:59 AM, Matgen84 said: Hi All guys Since I add a Broadcom card to my Z390 Aorus master config, I can't boot. Reset Nvram in Picker ---> no success Please, help me opencore-2020-02-07-144848.txt If your card worked before clover. Give me detail about kext, patch Link to comment Share on other sites More sharing options...
ameenjuz Posted February 9, 2020 Share Posted February 9, 2020 when I boot latest builded opencore then this issue is appear on boot screen OC: configuration requires vault but no vault provided any know how to fix it I couldn't create vault.plist Link to comment Share on other sites More sharing options...
jinbingmao Posted February 9, 2020 Share Posted February 9, 2020 57 minutes ago, anmool said: when I boot latest builded opencore then this issue is appear on boot screen OC: configuration requires vault but no vault provided any know how to fix it I couldn't create vault.plist Vault=Optional Link to comment Share on other sites More sharing options...
ameenjuz Posted February 9, 2020 Share Posted February 9, 2020 1 minute ago, jinbingmao said: Vault=Optional how to fix it OC: configuration requires vault but no vault provided my boot is stuck with this Link to comment Share on other sites More sharing options...
canyondust Posted February 9, 2020 Share Posted February 9, 2020 1 hour ago, anmool said: how to fix it OC: configuration requires vault but no vault provided my boot is stuck with this Literally, set the ‘vault’ parameter in config.plist to ‘optional’ Link to comment Share on other sites More sharing options...
ameenjuz Posted February 9, 2020 Share Posted February 9, 2020 1 hour ago, canyondust said: Literally, set the ‘vault’ parameter in config.plist to ‘optional’ thanks man worked 1 Link to comment Share on other sites More sharing options...
mathew2019 Posted February 9, 2020 Share Posted February 9, 2020 (edited) Booting stuck on PCI configuration end and apfs_module_Start:1683.... My configuration is i9 10940X + X299 Asus Prime deluxe II motherboard + Radeon VII graphics. I am able to boot with clover but on open core booting is stuck on PCI configuration end + apfs_module_Start:1683.... I have tested OC on my other i9 9900K +z390 motherboard system and it works well Do I need to add any quirks or any tweaks for X299? I have TSC sync kext for 14core is already added. Any help appreciated Thank you Edited February 9, 2020 by mathew2019 Link to comment Share on other sites More sharing options...
Matgen84 Posted February 9, 2020 Share Posted February 9, 2020 On 2/8/2020 at 2:24 PM, nmano said: If your card worked before clover. Give me detail about kext, patch It's a OOB wifi card no kexts needed. I think it's a NVRAM issue, my config is very unstable on OpenCore : after clear CMOS, i can boot via Opencore 0.5.5. Since I update to Opencore 0.5.6 Beta, I can't. Config.plist in attachment OC-config.plist Link to comment Share on other sites More sharing options...
telepati Posted February 9, 2020 Share Posted February 9, 2020 (edited) @Matgen84 any verbose screen? I checked your config.plist. First, of all, you don't need these ACPI patches you are already using WEG. Remove all. Also, add AWAC.aml and checksum RTC patch. No need to set ProtectSecureBoot quirks YES. Make this NO. Edited February 9, 2020 by telepati 1 Link to comment Share on other sites More sharing options...
startergo Posted February 9, 2020 Share Posted February 9, 2020 On 2/8/2020 at 8:10 AM, nmano said: 9 ACPI Sleep patch 9 ACPI patch for sleep config-OC.plist All Intel Motherboard. I test X99,X299. Is this doing the same as HibernationFixup.kext? 1 Link to comment Share on other sites More sharing options...
nmano Posted February 9, 2020 Share Posted February 9, 2020 (edited) 3 hours ago, startergo said: Is this doing the same as HibernationFixup.kext? Test1-with HibernationFixup.kext Test2-with HibernationFixup.kext + patch test3-Just patch Restart your System each time. Edited February 9, 2020 by nmano Link to comment Share on other sites More sharing options...
telepati Posted February 10, 2020 Share Posted February 10, 2020 (edited) @vit9696 You are confusing me. You are saying do not use AppleUsbKbDxe.efi Ivy Bridge (3rd generation Core) and above motherboards. But if I am not using it on my TUF Z390 Hotkeys are doesn't work. I am using these settings and just Alt/Opt, Command+V Command+S etc. working but Command+R and Command+Opt+P+R unusable. PollAppleHotKeys YES ShowPicker NO TakeoffDelay 5000 Timeout 0 UsePicker YES KeySupport YES If I add AppleUsbKbDxe.efi and set KeySupport NO all Hotkeys are working without any problem. What should we do now are we using this efi driver or not? Note: I am using Apple Numerical Wired Keyboard. Edited February 10, 2020 by telepati Link to comment Share on other sites More sharing options...
canyondust Posted February 10, 2020 Share Posted February 10, 2020 20 minutes ago, telepati said: @vit9696 You are confusing me. You are saying do not use AppleUsbKbDxe.efi Ivy Bridge (3rd generation Core) and above motherboards. But if I am not using it on my TUF Z390 Hotkeys are doesn't work. I am using these settings and just Alt/Opt, Command+V Command+S etc. working but Command+R and Command+Opt+P+R unusable. PollAppleHotKeys YES ShowPicker NO TakeoffDelay 5000 Timeout 0 UsePicker YES KeySupport YES If I add AppleUsbKbDxe.efi and set KeySupport NO all Hotkeys are working without any problem. What should we do now are we using this efi driver or not? Note: I am using Apple Numerical Wired Keyboard. I’m on Z170 and exhibit the same behavior, but mine does work within a very small time window. I have to press the hot keys within about 100ms of the bios logo disappearing. I’m also on an Apple numerical wired keyboard. Link to comment Share on other sites More sharing options...
telepati Posted February 10, 2020 Share Posted February 10, 2020 (edited) 39 minutes ago, canyondust said: I’m on Z170 and exhibit the same behavior, but mine does work within a very small time window. I have to press the hot keys within about 100ms of the bios logo disappearing. I’m also on an Apple numerical wired keyboard. Are you holding or repeatedly press? Cause I tried both it never worked. But with AppleUsbKbDxe.efi its working like a crazy. Edited February 10, 2020 by telepati Link to comment Share on other sites More sharing options...
canyondust Posted February 10, 2020 Share Posted February 10, 2020 23 minutes ago, telepati said: @vit9696 You are confusing me. You are saying do not use AppleUsbKbDxe.efi Ivy Bridge (3rd generation Core) and above motherboards. But if I am not using it on my TUF Z390 Hotkeys are doesn't work. I am using these settings and just Alt/Opt, Command+V Command+S etc. working but Command+R and Command+Opt+P+R unusable. PollAppleHotKeys YES ShowPicker NO TakeoffDelay 5000 Timeout 0 UsePicker YES KeySupport YES If I add AppleUsbKbDxe.efi and set KeySupport NO all Hotkeys are working without any problem. What should we do now are we using this efi driver or not? Note: I am using Apple Numerical Wired Keyboard. I’m on Z170 and exhibit the same behavior, but mine does work within a very small time window. I have to press the hot keys within about 100ms of the bios logo disappearing. I’m also on an Apple numerical wired keyboard. Link to comment Share on other sites More sharing options...
canyondust Posted February 10, 2020 Share Posted February 10, 2020 1 hour ago, telepati said: Are you holding or repeatedly press? Cause I tried both it never worked. But with AppleUsbKbDxe.efi its working like a crazy. I’ve been able to do it both was. Timing of the press is the most critical. I’m going to try messing with takeoff delay values and switch the protocol from auto to AMI. AppleUsbKbDxe also works perfectly for me but I’m trying not to use it. Link to comment Share on other sites More sharing options...
Matgen84 Posted February 10, 2020 Share Posted February 10, 2020 13 hours ago, telepati said: @Matgen84 any verbose screen? I checked your config.plist. First, of all, you don't need these ACPI patches you are already using WEG. Remove all. Also, add AWAC.aml and checksum RTC patch. No need to set ProtectSecureBoot quirks YES. Make this NO. Thanks. I can boot but with Black Screen instead of macOS Desktop! How to find verbose screen? Link to comment Share on other sites More sharing options...
telepati Posted February 10, 2020 Share Posted February 10, 2020 (edited) 2 hours ago, Matgen84 said: Thanks. I can boot but with Black Screen instead of macOS Desktop! How to find verbose screen? Add boot-argument -v I checked again you already have it. But remove those boot arg; slide=255 agdpmod=pikera darkwake=8 Edited February 10, 2020 by telepati 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted February 10, 2020 Share Posted February 10, 2020 (edited) 1 hour ago, telepati said: Add boot-argument -v I checked again you already have it. But remove those boot arg; slide=255 agdpmod=pikera darkwake=8 I try and let you know. Thanks. Edit: @telepati It seems to work now (thanks for your advice on patches). In verbose mode, I see several ACPI error. I have to find the file to find out more Edited February 10, 2020 by Matgen84 1 Link to comment Share on other sites More sharing options...
Recommended Posts