NorthAmTrans Posted August 18, 2019 Share Posted August 18, 2019 @macprodude do you mind sending your config? Link to comment Share on other sites More sharing options...
Hackintosh Tech Posted August 18, 2019 Share Posted August 18, 2019 (edited) 15 minutes ago, NorthAmTrans said: @macprodude do you mind sending your config? Sure, but it's a Vega 64 Stock card i'm starting to wonder if there is an underlying problem between the VBIOS, Opencore and Whatevergreen, hard to tell unless someone else is having a similar issue. My RX580 works fine config.plist Edited August 18, 2019 by MacProDude Link to comment Share on other sites More sharing options...
NorthAmTrans Posted August 18, 2019 Share Posted August 18, 2019 @macprodude you might be right. Wanna try changing your UIscale to 01 in NVRAM? Link to comment Share on other sites More sharing options...
Hackintosh Tech Posted August 18, 2019 Share Posted August 18, 2019 i assumed because i have a 4k Display UI scale should be 02 and 01 for 1080p, which is why i have 02. but i will test this out. Okay so that is strange UIScale 01 which is suppose to be for 1080p Displays actually reduces the size of the boot logo, but i have now lost HIDPi on boot, its cosmetic i know but everything worked okay under 0.0.3 so i'm confused as to what changed to make the bootscreen behave the way it does. Link to comment Share on other sites More sharing options...
NorthAmTrans Posted August 18, 2019 Share Posted August 18, 2019 Im right there with you on wanting things right, even if it's cosmetic. I get caught up once a week in getting thunderbolt completely native. Im no help to anyone on it but sure as hell try. This might be for move like a dev @Pavo Link to comment Share on other sites More sharing options...
canyondust Posted August 18, 2019 Share Posted August 18, 2019 4 hours ago, NorthAmTrans said: You need to move all of your kext to the OC folder and make sure Lilu is at the top in your config. Also make sure they're all in the config. 2 I've migrated the kexts back out of /Library/Extensions to EFI/OC/Kexts. Everything still working Pretty happy with OC so far. It takes a little while for the picker to appear but I bet that is down to the scan options which I'll mess with later. So far so good! Link to comment Share on other sites More sharing options...
NorthAmTrans Posted August 19, 2019 Share Posted August 19, 2019 @canyondust nice! Yeah I toyed around with scan policies today but got caught up in life. Im curious as to what all we need to operate here with minimal scanning. Maybe just the two below for me (M.2 NVME). I love how Xcode converts it for you. http://opencore.one 0x00000400 - Allow EFI Partition Scan 0x00080000 - NVMe Scan 1 Link to comment Share on other sites More sharing options...
maddie Posted August 19, 2019 Share Posted August 19, 2019 (edited) 5 hours ago, MacProDude said: i assumed because i have a 4k Display UI scale should be 02 and 01 for 1080p, which is why i have 02. but i will test this out. Okay so that is strange UIScale 01 which is suppose to be for 1080p Displays actually reduces the size of the boot logo, but i have now lost HIDPi on boot, its cosmetic i know but everything worked okay under 0.0.3 so i'm confused as to what changed to make the bootscreen behave the way it does. Hey, try disabling SanitiseClearScreen in UEFI->Quirks, that's what fixed for my Vega 64. And Misc->Boot->Resolution, just set it to "Max". "WxH" is not a valid value, what @NorthAmTrans means is that setting it to a specific resolution that fits your screen. Also, since you're using a 4K display, leave UIScale to 02 Edited August 19, 2019 by maddie 1 Link to comment Share on other sites More sharing options...
NorthAmTrans Posted August 19, 2019 Share Posted August 19, 2019 19 minutes ago, maddie said: And Misc->Boot->Resolution, just set it to "Max". "WxH" is not a valid value, what @NorthAmTrans means is that setting it to a specific resolution that fits your screen. First off, you're the jam. I nabbed WxH from the doc but I must have misunderstood what it meant...and now I'm seeing that it's Width by Height. Dammit. Wow. Just wow. 1 Link to comment Share on other sites More sharing options...
canyondust Posted August 19, 2019 Share Posted August 19, 2019 3 hours ago, NorthAmTrans said: @canyondust nice! Yeah I toyed around with scan policies today but got caught up in life. Im curious as to what all we need to operate here with minimal scanning. Maybe just the two below for me (M.2 NVME). I love how Xcode converts it for you. http://opencore.one 0x00000400 - Allow EFI Partition Scan 0x00080000 - NVMe Scan Interesting! And you could keep a ‘scan all’ type EFI on a USB key if you needed to boot a wider range of devices. 1 Link to comment Share on other sites More sharing options...
matgeo Posted August 19, 2019 Share Posted August 19, 2019 11 hours ago, matgeo said: Is rename SAT0 to SATA recommended? Anyone? Link to comment Share on other sites More sharing options...
moozuki Posted August 19, 2019 Share Posted August 19, 2019 I have never renamed SAT0 to SATA, never had a single problem by not doing so. I take that as the rename is not needed. Link to comment Share on other sites More sharing options...
obus Posted August 19, 2019 Share Posted August 19, 2019 (edited) 13 hours ago, MacProDude said: Sure, but it's a Vega 64 Stock card i'm starting to wonder if there is an underlying problem between the VBIOS, Opencore and Whatevergreen, hard to tell unless someone else is having a similar issue. My RX580 works fine config.plist I have exactly the same problem with my Vega 64. Tried all sorts of combination without success. The funny thing is that if I have ShowPicker and UsePicker set to true (YES) the resolution is fine when the Apple progress bar is showing up after the OC boot menu. This was working in a previous version of OC for sure. Edited August 19, 2019 by obus Link to comment Share on other sites More sharing options...
maddie Posted August 19, 2019 Share Posted August 19, 2019 1 minute ago, obus said: I have exactly the same problem with my Vega 64. Tried all sorts of combination without success. The funny thing is that if I have ShowPicker and UsePicker set to true (YES) the resolution is fine when the Apple progress bar is showing up after the OC boot menu. @MacProDude @obus I had the same problem with my Vega 64 (the iMacPro1,1 build in my signature). I solved it by disabling SanitiseClearScreen, but maybe there's some other configuration that might affect it. This is my config.plist with the PlatformInfo section removed, for your reference.config.plist config.plist Link to comment Share on other sites More sharing options...
obus Posted August 19, 2019 Share Posted August 19, 2019 (edited) On 8/19/2019 at 11:16 AM, maddie said: @MacProDude @obus I had the same problem with my Vega 64 (the iMacPro1,1 build in my signature). I solved it by disabling SanitiseClearScreen, but maybe there's some other configuration that might affect it. This is my config.plist with the PlatformInfo section removed, for your reference.config.plist config.plist I have that disabled in my config too. We have the same settings. Still this was working in a previous version of OC. Edited August 23, 2019 by obus Providing Logfile Link to comment Share on other sites More sharing options...
maddie Posted August 19, 2019 Share Posted August 19, 2019 13 minutes ago, obus said: I have that disabled in my config too. We have the same settings. Still this was working in a previous version of OC. Hmm, then I have no clue now It was the same for me too, working in older OC, after updated to 0.0.4 with FwRuntimeServices, it's not working. But that disabling that option indeed solves my problem, so.. ¯\_(ツ)_/¯ 1 Link to comment Share on other sites More sharing options...
matgeo Posted August 19, 2019 Share Posted August 19, 2019 I need some help with upgrading to Mojave. I run the Mojave installer , it finishes the first stage and is asks me to restart. But , there is no option on OC to boot from Installer , just the High Sierra partition. After reboot I saw the installer files to be on the root of High Sierra and not on another partition/ I something wrong with my config? Can someone take a look, please? config.plist 1 Link to comment Share on other sites More sharing options...
NorthAmTrans Posted August 19, 2019 Share Posted August 19, 2019 9 hours ago, matgeo said: Anyone? Take a look at IOreg now and save it. Disable the patch then, if boot works fine, and look at IOreg and compare the two. Link to comment Share on other sites More sharing options...
matgeo Posted August 19, 2019 Share Posted August 19, 2019 @NorthAmTrans Boots fine. Ioreg doesn't show any diffirence , so I guess I don't need that patch. 1 Link to comment Share on other sites More sharing options...
NorthAmTrans Posted August 19, 2019 Share Posted August 19, 2019 @matgeo it's a good feeling slimming things down. Link to comment Share on other sites More sharing options...
Hackintosh Tech Posted August 19, 2019 Share Posted August 19, 2019 15 hours ago, maddie said: Hey, try disabling SanitiseClearScreen in UEFI->Quirks, that's what fixed for my Vega 64. And Misc->Boot->Resolution, just set it to "Max". "WxH" is not a valid value, what @NorthAmTrans means is that setting it to a specific resolution that fits your screen. Also, since you're using a 4K display, leave UIScale to 02 I had all those options before in still a massive bootlogo UIScale does nothing for my Vega 64 Link to comment Share on other sites More sharing options...
maddie Posted August 19, 2019 Share Posted August 19, 2019 5 minutes ago, MacProDude said: I had all those options before in still a massive bootlogo UIScale does nothing for my Vega 64 Hmm.. I guess it doesn't always work for everyone with similar setup. But I saw your uploaded config.plist has SanitiseClearScreen set to True so I thought you could give it a shot. UIScale works only when the resolution is correct I think, or it will only make the logo look even bigger. Link to comment Share on other sites More sharing options...
Hackintosh Tech Posted August 19, 2019 Share Posted August 19, 2019 Just now, maddie said: Hmm.. I guess it doesn't always work for everyone with similar setup. But I saw your uploaded config.plist has SanitiseClearScreen set to True so I thought you could give it a shot. UIScale works only when the resolution is correct I think, or it will only make the logo look even bigger. I have set that to false and the logo is still big. I must of tried every option. strange as it worked before updating OpenCore. 1 Link to comment Share on other sites More sharing options...
ludufre Posted August 19, 2019 Share Posted August 19, 2019 Hi, OpenCore supports RAID0 in APFS? Clover has a problem with bless that prevents using Kernel Cache. Link to comment Share on other sites More sharing options...
g0atbutt Posted August 20, 2019 Share Posted August 20, 2019 Does anyone happen to have an EFI.zip for a Ryzen build? I'm having a hard time with the AMD patches and would like to compare it to a working build. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts