Andres ZeroCross Posted August 8, 2019 Share Posted August 8, 2019 1 hour ago, Matgen84 said: Thanks. I try "AvoidRuntimeDefrag= YES" after update config.plist 0.0.3--->0.0.4 Right, SATA drives=internal. But on your desktop screenshot, the drives are yellow icons as external drives. On my old system, there are grey icons as internal disks. I got it,, you mean all hot plug storage is still in grey icon in your system??? Maybe this will explain 1. All Hot Plug harddisk device must be Orange / White icon for USB Flashdisk . It's default 2. Orange icon can be changed to grey with Orange Disk icon Patch (old patch) But remember,,, put kext patch in config.plist doesn't mean patch is working after reboot. You need to verify Hot plug status in IOREG Output. There is special way in catalina to rebuild kextcache / prelinked kernel. You need to sudo mount -uw / sudo killAll Finder Then rebuild kextcache / prelinkedkernel (or just run Kext Utility.app), without command above your prelinked kernel is not rebuilt and patch actually didn't work 1 Link to comment Share on other sites More sharing options...
iTTT Posted August 8, 2019 Share Posted August 8, 2019 my OC setting almost done. i set Resolution to 3840x2160, but the Apple logo still has the lowest resolution and so big. anyone know how to solve this? thanks. 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted August 8, 2019 Share Posted August 8, 2019 (edited) Hi Guys, I can't boot correctly. But I've this line below before OC Menu. How to solve them, please. Edited August 8, 2019 by Matgen84 Link to comment Share on other sites More sharing options...
obus Posted August 8, 2019 Share Posted August 8, 2019 (edited) 3 hours ago, Andres ZeroCross said: Don't mix new booter feature with old files. Update your opencore and applesupport files to latest version. And reupload your config.plist Ok.Compiled a new set of OC and AppleSupportFiles. Created a new config.plist from Docs. Attached you have my "old" working config.plist and the new I just created. opencore-2019-08-08-112129.txt config_new.plist config_old.plist Edited August 8, 2019 by obus Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted August 8, 2019 Share Posted August 8, 2019 (edited) 1 hour ago, obus said: Ok.Compiled a new set of OC and AppleSupportFiles. Created a new config.plist from Docs. Attached you have my "old" working config.plist and the new I just created. opencore-2019-08-08-112129.txt config_new.plist config_old.plist Use this, and post the result config.plist 2 hours ago, Matgen84 said: Hi Guys, I can't boot correctly. But I've this line below before OC Menu. How to solve them, please. What did you change before?? it's look like bad config.plist or different setup/version between OpenCore Files (drivers + bootloader) with config.plist Edited August 8, 2019 by Andres ZeroCross 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted August 8, 2019 Share Posted August 8, 2019 14 minutes ago, Andres ZeroCross said: Use this, and post the result config.plist What did you change before?? Like bad config.plist or different setup/version between OpenCore Files (drivers + bootloader) with config.plist I've delete unfortunately my previous OC Config.plist. So I try to configure new one, there is some difficulties. Could you take a look at the file, if you have the time config.plist.zip Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted August 8, 2019 Share Posted August 8, 2019 12 minutes ago, Matgen84 said: I've delete unfortunately my previous OC Config.plist. So I try to configure new one, there is some difficulties. Could you take a look at the file, if you have the time config.plist.zip New config.plist must be sync with new OpenCore file and AppleSupport file. How can i know about that?? Did you use latest drivers from AppleSupport Pkg and latest OpenCore files? 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted August 8, 2019 Share Posted August 8, 2019 (edited) 9 minutes ago, Andres ZeroCross said: New config.plist must be sync with new OpenCore file and AppleSupport file. How can i know about that?? Did you use latest drivers from AppleSupport Pkg and latest OpenCore files? I try your OC Config.plist and report. I don't find memcheck tools. EDIT: OpenCore file and AppleSupport file are compiling 08/06/2019 Edited August 8, 2019 by Matgen84 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted August 8, 2019 Share Posted August 8, 2019 8 minutes ago, Matgen84 said: I try your OC Config.plist and report. I don't find memcheck tools. EDIT: OpenCore file and AppleSupport file are compiling 08/06/2019 I didn't give you any config.plist yet 1 Link to comment Share on other sites More sharing options...
obus Posted August 8, 2019 Share Posted August 8, 2019 52 minutes ago, Andres ZeroCross said: Use this, and post the result config.plist Hey @Andres ZeroCross what did you change. It works like charm but I can't see what is changed! I tested for hours and didn't get any positive result. Do you remember what you changed? Thank's a lot anyway. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted August 8, 2019 Share Posted August 8, 2019 (edited) 2 minutes ago, obus said: Hey @Andres ZeroCross what did you change. It works like charm but I can't see what is changed! I tested for hours and didn't get any positive result. Do you remember what you changed? Thank's a lot anyway. Cmon,, you just need compare it with your config_new.plist above Some change to msr patch (xeon), booter combination, Edited August 8, 2019 by Andres ZeroCross Link to comment Share on other sites More sharing options...
Matgen84 Posted August 8, 2019 Share Posted August 8, 2019 9 minutes ago, Andres ZeroCross said: I didn't give you any config.plist yet Because of multi quote, I believe it. So I'm waiting. Thanks Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted August 8, 2019 Share Posted August 8, 2019 4 minutes ago, Matgen84 said: Because of multi quote, I believe it. So I'm waiting. Thanks Try this, and post the result config.plist 1 Link to comment Share on other sites More sharing options...
obus Posted August 8, 2019 Share Posted August 8, 2019 10 minutes ago, Andres ZeroCross said: Cmon,, you just need compare it with your config_new.plist above Some change to msr patch (xeon), booter combination, DisableIoMapper = YES was the culprit. Tested so much that I forgot the most basic stuff for my CPU. Cheers again mate for your input Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted August 8, 2019 Share Posted August 8, 2019 7 minutes ago, obus said: DisableIoMapper = YES was the culprit. Tested so much that I forgot the most basic stuff for my CPU. Cheers again mate for your input Function DisableIOMapper is to drop table DMAR. Best options to handle DMAR table is DisableIOMapper instead dart=0 or drop DMAR from ACPI -> Block Link to comment Share on other sites More sharing options...
Matgen84 Posted August 8, 2019 Share Posted August 8, 2019 (edited) 25 minutes ago, Andres ZeroCross said: Try this, and post the result config.plist I can't try now because since 1 hours I can't restart or shutdown on my Aorus config (Clover). I don't find the solution... Go to: REPORT: Some issue Edited August 8, 2019 by Matgen84 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted August 8, 2019 Share Posted August 8, 2019 33 minutes ago, Matgen84 said: I can't try now because since 1 hours I can't restart or shutdown on my Aorus config (Clover). I don't find the solution... Go to: REPORT: Some issue Your photo is useless,, i can't read the log. What string field of???? 1 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted August 8, 2019 Share Posted August 8, 2019 46 minutes ago, Matgen84 said: I can't try now because since 1 hours I can't restart or shutdown on my Aorus config (Clover). I don't find the solution... Go to: REPORT: Some issue Take a photo of files in EFI/OC/Drivers Link to comment Share on other sites More sharing options...
Matgen84 Posted August 8, 2019 Share Posted August 8, 2019 15 minutes ago, Andres ZeroCross said: Your photo is useless,, i can't read the log. What string field of???? I do my best, below Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted August 8, 2019 Share Posted August 8, 2019 1 minute ago, Matgen84 said: I do my best, below There are many miss spell in your config.plist and many options is miss in your config.plist. Where did you get this config.plist?? You just need to edit SampleFull.plist from OpenCore bootloader's DOC and rename it to config.plist. But try this first,, config.plist Link to comment Share on other sites More sharing options...
Matgen84 Posted August 8, 2019 Share Posted August 8, 2019 2 minutes ago, Andres ZeroCross said: There are many miss spell in your config.plist and many options is miss in your config.plist. Where did you get this config.plist?? You just need to edit SampleFull.plist from OpenCore bootloader's DOC and rename it to config.plist. But try this first,, config.plist I used the samplefull precisely... with no luck My Drivers I test your config.plist tomorrow morning, because I've to to the emergency now Good night Thanks Link to comment Share on other sites More sharing options...
obus Posted August 8, 2019 Share Posted August 8, 2019 (edited) On 1/27/2019 at 5:37 PM, Andres ZeroCross said: i just use GoldFish64's AudioDxe.efi+BoochimeDxe.efi in Drivers64UEFI 1. set PlayAsync=True in config.plist 2. Put custom "sound.wav and sound_night.wav" ini Theme Folder 3. Custom "bootchime.wav" in root of EFI partition to overide Bootchimedxe.efi's default sound. 4. Use Clover r4862 just it. Hi @Andres ZeroCross Sorry if this is off topic but I don't know where to ask for guidance. I am running OC latest version and downloaded and compiled the latest Goldfish/AudioPkg. Putting Audio.dxe and BootChimeDxe.efi in the drivers folder and BootChimeCFG.efi and HdaCodecDump.efi in the Tools folder. Configured BootChimeCFG.efi in Shell. Cleaned NVRAM and Configured sound out to Spdif optical and volume to 40%. Tested the sound and everything sounds great. Rebooted and the sound started to play at the Apple Prgres bar as it should, with perfect quality but it didn't play the the full waw-file only the last part of it. It seems like some files are loading to late. Any ideas? Edited August 8, 2019 by obus Link to comment Share on other sites More sharing options...
lanzaozijun Posted August 9, 2019 Share Posted August 9, 2019 (edited) I set the resolution to 2560x1440, but the startup resolution is still 1024x768. After launching, Hackintool shows the following... How to solve these problems? Thank you. config.plist Edited August 9, 2019 by lanzaozijun Link to comment Share on other sites More sharing options...
maddie Posted August 9, 2019 Share Posted August 9, 2019 11 minutes ago, lanzaozijun said: 我将分辨率设置为2560x1440，但启动分辨率仍为1024x768。 启动后，Hackintool显示以下情况......如何解决这些问题？ 谢谢。 config.plist This is an English speaking forum, please use English only, or not a lot of people can help you out here. You need to provide some more information on this, what is the OpenCore version you're using? And what is the goal are you trying to achieve? Try setting ProvideConsoleGop=true, SanitiseClearScreen=true, ConsoleControl=true to see if it works? Link to comment Share on other sites More sharing options...
lanzaozijun Posted August 9, 2019 Share Posted August 9, 2019 Thank you for your reminder. OpenCore version 0.0.3 starts smoothly to macOS 10.14.6 Model and hardware are as follows: imac18,3 | i7-8700K | GIGABYTE Z370N | RX560 | 32GB RAM But the power information seems to have some problems here... ProvideConsoleGop = true, SanitiseClearScree n = true, ConsoleControl = true does not seem to have any effect on starting low resolution. . . Link to comment Share on other sites More sharing options...
Recommended Posts