Jump to content
27 posts in this topic

Recommended Posts

Could someone tell me What The RealTek Lan chip ID is  on the Z690 Gigabyte Gaming X and if the is a kext that could be used with a Monterey Install?

 in the EFI Folder I have tried to find it but I just find RealTek 2.5 gig lan.

 

 

 

Edited by BALDY_MAN
  • Like 1

Hi Bro - I don't know but I think you'll be very lucky and hard pressed to find a fully working Hack build on the z690 platform as it is relatively new but I hope you find what you're looking for, sorry to put a damper on your quest.

  • Like 1

"Realtek Gaming 2.5GbE Family Controller"
Hardware IDs:
PCI\VEN_10EC&DEV_8125&SUBSYS_E0001458&REV_05
PCI\VEN_10EC&DEV_8125&SUBSYS_E0001458
PCI\VEN_10EC&DEV_8125&CC_020000
PCI\VEN_10EC&DEV_8125&CC_0200

  • Like 1

I THINK The GIGABYTE Z690 UD  Will have a easy lan fIX With Lucy kext. and sound ALC897

 

@Rocky12 thanks for your help PCI\VEN_10EC&DEV_8125&SUBSYS_E0001458&REV_05 = RTL8125B So I believe I could use the Lucy kext to fix LAN And sound ALC1220-VB on the Gigabyte Z690 Gaming X @eSaFyour comments cool Bro

 

Edited by BALDY_MAN
UPdated
  • Like 2
13 hours ago, eSaF said:

Hi Bro - I don't know but I think you'll be very lucky and hard pressed to find a fully working Hack build on the z690 platform as it is relatively new but I hope you find what you're looking for, sorry to put a damper on your quest.

This motherboard is actually the first on which a successful boot of macOS was reported in mid-November, on a Forum-Which-Shall-Not-Be-Named-Here. And, for now, pretty much anything Z690 or B660 has been hacked rather painlessly by those who attempted. :thumbsup_anim:

OpenCore 0.7.7 has brought support for using E-cores and hyperthreading together, and Clover 5144 has hopefully caught up (still waiting for someone to test and report).

  • Like 1
  • Thanks 1
9 minutes ago, etorix said:

(still waiting for someone to test and report).

Just work very fine. Mobo H610M S2H.

MaLd0n 2022-02-05 at 10.09.28.png

MaLd0n 2022-02-05 at 10.09.44.png

All Folders is updated here

https://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/

@BALDY_MAN

or RealtekRTL8111.kext or LucyRTL8125Ethernet.kext

two kexts work for all Realtek lan cards after Skylake family

  • Like 2
  • Thanks 2
35 minutes ago, MaLd0n said:

Just work very fine. Mobo H610M S2H.

MaLd0n 2022-02-05 at 10.09.28.png

MaLd0n 2022-02-05 at 10.09.44.png

All Folders is updated here

https://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/

@BALDY_MAN

or RealtekRTL8111.kext or LucyRTL8125Ethernet.kext

two kexts work for all Realtek lan cards after Skylake family

@MaLd0n thank you for sharing your knowledge

 

  • Like 3

@MaLd0n  Thinking about getting the Z690 Gigabyte Gaming X. with a 12700k /12600k. I could use the hardware from my Z490 Hackintosh. I May leave it till next month. thanks again for your input

  • Like 1
1 hour ago, BALDY_MAN said:

Thinking about getting the Z690 Gigabyte Gaming X. with a 12700k /12600k. I could use the hardware from my Z490 Hackintosh. I May leave it till next month. thanks again for your input

Bro that sounds like one He££ of a beast when you get to do it and of course @MaLd0n will help you iron out any kinks along the way. Wish I could join the Z690 Club but the wife is keeping a tight grip on the purse strings :hysterical: She reckons I've spent enough my Drones so there is nothing left for p/c upgrade at the moment. There is a lot to be said for being single, I keep telling her we are only related by marriage so stop being a PITA about my spending. :hysterical:

Spoiler

 

 

  • Haha 1
1 hour ago, eSaF said:

 

for being single, I keep telling her we are only related by marriage so stop being a PITA about my spending. :hysterical:

  Hide contents

 

I'm pissing my self laughing your a funny bloke.  I will do you a good deal on my Z490 gigabyte master and 10700k if ya wish

 

 

1 minute ago, BALDY_MAN said:

 I will do you a good deal on my Z490 gigabyte master and 10700k if ya wish

 

Bro - which part of my post where I stated the wife and the purse strings you didn't understand? I wish I could take you up on the offer. The only way I could finance such a move is to borrow a pair of her stockings and pulling it over my head as a disguise. :hysterical: At the moment I am in 'Happy wife Happy Life' club and aim to keep it that way.

  • Like 1
  • Haha 3

 

up date just build  the new Gigabyte Z690 gaming X. pc hope to get it hackintosh soon. i had to mess about and Mod a waterblock back plate.so the block fitted the new LGA1700 socket. but when it went well with great Temps. room temps 24C  CPU Package 26 C . so a good start

 IMG_20220210_205123989.thumb.jpg.2cee87e7f7138595cd94c55be4222a4b.jpg

  • Like 5
  • 1 month later...
  • 1 year later...

Hi everyone,

@MaLd0n and @BALDY_MAN I have this same Gigabyte Z690 Gaming X (but DDR 4 version), with a 12400F and an RX 560. I've just buided it a few hours ago but I still haven't been able to have a working EFI for this. Could you give me some tips to follow? Thanks! :)

 

My previous hackintosh was based on an old Gigabyte H110-M and an i5 7500, so I'm really out-of-date with regards in Alder Lake.

u can use alder lake efi from link bellow

https://olarila.com/files/OPENCORE.MOD1/EFI.Opencore.Desktop.AlderLake.MOD.zip

*If you used SSDT instead DSDT uncheck RebaseRegions in Acpi tab

 

*After installation you need remove unnecessary files like unused Lan kexts

Bios/uefi in full default. Just enable xmp and vt-d

  • Like 2
×
×
  • Create New...