Jump to content

Asrock Z490M ITX/AC + i5 10600K + RX570 (iHack 20,1 Build)


lorys89
 Share

2 posts in this topic

Recommended Posts

ASROCK Z490M ITX/AC Hackintosh Build

 

mobo.png.f542e11b6d60cb460f25e8b2d4335310.pngpc.jpeg.d5c53de2be0c3e2fef52076d6b170ed3.jpeg

Computer Spec:

Component Brank
CPU Intel i5 10600K (6C-12T 12MB CML)
iGPU Intel® UHD Graphics
GPU SAPPHIRE NITRO+ RX570 4GB GDDR5
Lan 2.5 GBPS Realtek 8125
Lan 1.0 GBPS Intel I219 V11
Audio Realtek ALC1200
Ram CORSAIR 32GB DDR4 3600 MHz
Wifi + Bluetooth DW1820A (BCM94350ZAE)
1° NVMe SSD SAMSUNG 970 EVO PLUS 500 GB (MACOS)
2° NVMe SSD SAMSUNG 970 EVO PLUS 500 GB (WIN)
1° SATA SSD SAMSUNG 860 EVO 500 GB (BACKUP)
2° SATA SSD SAMSUNG 870 EVO 500 GB (DATI)
SmBios iMac 20,1
BootLoader OpenCore 0.7.7
macOS

Monterey 12.2 beta 2

 

 

What works :

  •  Intel UHD iGPU HDMI/DP Output
  •  Intel UHD iGPU - H264 & HEVC
  •  SHAPPIRE NITRO+ RX570 HDMI/DP OUTPUT (with audio)
  •  SHAPPIRE NITRO+ RX570 - H264 & HEVC
  •  ALC1200 jack headphone (Front)
  •  ALC1200 jack line-out (Rear)
  •  ALC1200 jack microphone (Front & Rear)
  •  ALC1200 jack linee-in (Rear)
  •  ALC1200 HDMI/DP Audio Output (IGPU)
  •  All USB Ports (port mapping performed)
  •  SpeedStep / Sleep / Wake
  •  HID Key PWRB & SLPB
  •  Wi-Fi and Bluetooth DW1820A (BCM94350ZAE) Module
  •  1° CONTROLLER NVME PciE Gen3x4
  •  2° CONTROLLER NVME PciE Gen3x4
  •  CONTROLLER SATA III
  •  All Sensors (CPU, GPU, NVME, SATA, FANS)
  •  Realtek RTL8125 LAN
  •  Intel I219 V11 LAN
  •  NVRAM
  •  Windows 11 boot from OpenCore

 

PERIPH.thumb.png.352dbc3fcc60a648c63c6f6dd5fc04ca.pngPCI-LIST.png.04c7af88aefdd4d2fde32c885fe46cf5.png

SENSOR.png.f47dd3f006cb403d9bdd6c1d96871d4a.png

USB-IO.thumb.png.0ead0272d162e5c42050220b2d4c9ea3.png

USB-INT.png.f91d405235267591b83f3502b3855e89.png

 

Bios settings

Enable :

  • SATA Operation : AHCI
  • XHCI Hand-Off
  • XMP 2.0 Profile 1 or AUTO
  • Primary Graphics Adapter : AUTO
  • Share Memory : 128Mb
  • IGPU Multi-Monitor

Disable :

  • Secure Boot
  • Intel SGX
  • Fastboot
  • CFG LOCK
  • Boot From Onboard LAN
  • CSM
Edited by lorys89
  • Like 1
  • Thanks 2
Link to comment
Share on other sites

  • 1 year later...

Hey mate, if there is no Radeon Graphics card installed, does this build run monitor on iGPU DP & or HDMI ports on motherboard back panel?


Does sleep and wake work?

 

also about the Intel Wifi card you removed, is this M Key or E Key and what about the antennas on the board, do they connect okay to the Dell Broadcom card you used? Did this card work without kernel extensions and are you on Monterey or Ventura confirmed working no additional kernel extensions for the WIFI/BT? 

 

thx

Edited by draylax
Link to comment
Share on other sites

 Share

×
×
  • Create New...