STLVNUB Posted July 19, 2021 Share Posted July 19, 2021 23 minutes ago, antuneddu said: As a precaution, I always save a copy of the EFI on google drive or on Ntfs partition, by now it has happened, sorry can't you recreate it? For which hw i5 9400f ? I use dropbox but unfortunately save efi archive over same file name, should name as version Link to comment Share on other sites More sharing options...
miliuco Posted July 19, 2021 Share Posted July 19, 2021 (edited) 1 hour ago, STLVNUB said: know all that still not booting I'm sure that 0.6.9 worked but lost that one This 0.7.1 EFI is for my machine, it boots perfectly but you have to adapt it to your hack: SSDTs can be different IGPU DeviceProperties (if applicable) ATI X570 (I have RX 580, no code in config.plist) kexts can be different to yours it has iMac20,1 SMBIOS. EFI.zip 49 minutes ago, eSaF said: I know this question maybe pointless but these two settings can be overlooked as in my case, have you checked the BIOS settings and disable SecureBootMode also disable TPM? These two settings will inhibit Monterey from booting if enabled, they can be enabled again after successful boot. @STLVNUB Check what Esaf says, TPM or PTT disabled in BIOS and SecureBootModel=Disabled in config.plist (my EFI has Default). Edited July 19, 2021 by miliuco 3 Link to comment Share on other sites More sharing options...
SavageAUS Posted July 19, 2021 Share Posted July 19, 2021 Have we got a list of supported / working Ethernet adapters for Monterey?Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Slice Posted July 19, 2021 Share Posted July 19, 2021 1 hour ago, SavageAUS said: Have we got a list of supported / working Ethernet adapters for Monterey? Sent from my iPhone using Tapatalk The list will be too long for the forum. See here LAN and Wireless Why this question? You want to buy new one? Link to comment Share on other sites More sharing options...
STLVNUB Posted July 19, 2021 Share Posted July 19, 2021 (edited) 9 hours ago, miliuco said: This 0.7.1 EFI is for my machine, it boots perfectly but you have to adapt it to your hack: SSDTs can be different IGPU DeviceProperties (if applicable) ATI X570 (I have RX 580, no code in config.plist) kexts can be different to yours it has iMac20,1 SMBIOS. EFI.zip 2.2 MB · 7 downloads @STLVNUB Check what Esaf says, TPM or PTT disabled in BIOS and SecureBootModel=Disabled in config.plist (my EFI has Default). Thanks very much, I'm nearly there. Was able to boot to installer with an EFI generated with OC_Gen-X Same EFI folder was tweaked to boot to desktop. Now to try yours Thanks so much Edited July 19, 2021 by STLVNUB Link to comment Share on other sites More sharing options...
SavageAUS Posted July 19, 2021 Share Posted July 19, 2021 The list will be too long for the forum. See here LAN and Wireless Why this question? You want to buy new one?Smalltree kext is no longer working in Monterey so was seeing what options I have in case it does not get fixed. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Slice Posted July 20, 2021 Share Posted July 20, 2021 8 hours ago, SavageAUS said: Smalltree kext is no longer working in Monterey so was seeing what options I have in case it does not get fixed. Sent from my iPhone using Tapatalk For example PCIe RTL8111 should work https://aliexpress.ru/item/32258465908.html?spm=a2g0o.productlist.0.0.2f8255f6pU8E9u&algo_pvid=47613f3e-98ca-4646-84ee-6f17a53c37ad&algo_expid=47613f3e-98ca-4646-84ee-6f17a53c37ad-31&btsid=0b8b158f16267635732533736ed0cd&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_&item_id=32258465908&sku_id=56123908996 You also may acquire USB WiFi or USB LAN. At your will. 1 Link to comment Share on other sites More sharing options...
Riley Freeman Posted July 20, 2021 Share Posted July 20, 2021 IntelMausi is still working on my Z68. Link to comment Share on other sites More sharing options...
SavageAUS Posted July 20, 2021 Share Posted July 20, 2021 For example PCIe RTL8111 should workhttps://aliexpress.ru/item/32258465908.html?spm=a2g0o.productlist.0.0.2f8255f6pU8E9u&algo_pvid=47613f3e-98ca-4646-84ee-6f17a53c37ad&algo_expid=47613f3e-98ca-4646-84ee-6f17a53c37ad-31&btsid=0b8b158f16267635732533736ed0cd&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_&item_id=32258465908&sku_id=56123908996 You also may acquire USB WiFi or USB LAN. At your will.My Broadcom wifi and Bluetooth work great so I can survive for now and hopefully the devs of the kext will work out what’s wrong. Sent from my iPhone using Tapatalk 1 Link to comment Share on other sites More sharing options...
WizeMan Posted July 20, 2021 Share Posted July 20, 2021 Anyone figured out what gives with the super slow boot? Link to comment Share on other sites More sharing options...
SavageAUS Posted July 20, 2021 Share Posted July 20, 2021 Anyone figured out what gives with the super slow boot?Beta 2 & 3 have been fine. Which one are you on?Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
WizeMan Posted July 20, 2021 Share Posted July 20, 2021 (edited) 21 minutes ago, SavageAUS said: Beta 2 & 3 have been fine. Which one are you on? Sent from my iPhone using Tapatalk I am on beta 3 (21A5284e). OpenCore 0.7.1 and: - Lilu 1.5.4 - AppleALC 1.6.2 - VirtualSMC (SMCProcessor / SMCSuperIO) 1.2.5 - WhateverGreen 1.5.1 - IntelMausiEthernet 1.0.3 - SmallTreeIntel 82576 1.0.6 - My USBMap.kext All these worked no issue on Big Sur, not boot duration problems, but that's not the story with Monterey. I tried to disable SmallTreeIntel but not change. Edited July 20, 2021 by WizeMan Link to comment Share on other sites More sharing options...
LockDown Posted July 20, 2021 Share Posted July 20, 2021 27 minutes ago, WizeMan said: Anyone figured out what gives with the super slow boot? Check boot log for iokit stall. Link to comment Share on other sites More sharing options...
sonicthehedgehog2 Posted July 20, 2021 Share Posted July 20, 2021 1 hour ago, SavageAUS said: Beta 2 & 3 have been fine. Which one are you on? Sent from my iPhone using Tapatalk I'm stuck on beta 2...can't seem to get past the reboot after the update Link to comment Share on other sites More sharing options...
WizeMan Posted July 20, 2021 Share Posted July 20, 2021 1 hour ago, ellaosx said: Check boot log for iokit stall. no iokit stall ... here is the log, do you see something strange? opencore-2021-07-20-131611.txt Link to comment Share on other sites More sharing options...
SavageAUS Posted July 20, 2021 Share Posted July 20, 2021 no iokit stall ... here is the log, do you see something strange? opencore-2021-07-20-131611.txtPost EFI minus serials. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
WizeMan Posted July 20, 2021 Share Posted July 20, 2021 7 minutes ago, SavageAUS said: Post EFI minus serials. Sent from my iPhone using Tapatalk Thank you. Removed serials, MLB, rom, UUID. PS this is the debug build of OC 0.7.1 which I use to investigate this issue. EFI.zip Link to comment Share on other sites More sharing options...
SavageAUS Posted July 20, 2021 Share Posted July 20, 2021 18 minutes ago, WizeMan said: Thank you. Removed serials, MLB, rom, UUID. PS this is the debug build of OC 0.7.1 which I use to investigate this issue. EFI.zip 10.14 MB · 1 download EFI.zipTry the one attached. Use a USB or at least have a backup of yours on USB. Link to comment Share on other sites More sharing options...
WizeMan Posted July 20, 2021 Share Posted July 20, 2021 1 hour ago, SavageAUS said: EFI.zipTry the one attached. Use a USB or at least have a backup of yours on USB. Thank you. Will try and let you know. Apart from the architecture on config.plist was there any other change? Link to comment Share on other sites More sharing options...
SavageAUS Posted July 20, 2021 Share Posted July 20, 2021 Thank you. Will try and let you know. Apart from the architecture on config.plist was there any other change?Updated OC, removed not needed tools, updated kexts and drivers. Added to config.plist. Sent from my iPhone using Tapatalk 2 Link to comment Share on other sites More sharing options...
WizeMan Posted July 20, 2021 Share Posted July 20, 2021 1 hour ago, SavageAUS said: Updated OC, removed not needed tools, updated kexts and drivers. Added to config.plist. Sent from my iPhone using Tapatalk Thank you. Thought my drivers / kexts were already up to date. Will try tomorrow first thing as I had some family business and get back to you, mate. Link to comment Share on other sites More sharing options...
HenryV Posted July 21, 2021 Share Posted July 21, 2021 Seems like beta2 and beta3 have excessive hard drive thrashing after boot and then things settle down. Link to comment Share on other sites More sharing options...
WizeMan Posted July 21, 2021 Share Posted July 21, 2021 14 hours ago, SavageAUS said: Updated OC, removed not needed tools, updated kexts and drivers. Added to config.plist. Sent from my iPhone using Tapatalk Unfortunately, no change. Here you can see the system log at the time of boot. There are many lines that skip minutes. slowboot.log Link to comment Share on other sites More sharing options...
STLVNUB Posted July 21, 2021 Share Posted July 21, 2021 I have same problem, sometimes it boot super fast, 34seconds. other times over 4 minutes, weird 1 Link to comment Share on other sites More sharing options...
LockDown Posted July 21, 2021 Share Posted July 21, 2021 1 hour ago, WizeMan said: Unfortunately, no change. Here you can see the system log at the time of boot. There are many lines that skip minutes. slowboot.log 360.03 kB · 0 downloads Try only with virtualsmc. disregard no acceleration first Link to comment Share on other sites More sharing options...
Recommended Posts