Jump to content

[pre-release] macOS Monterey


1,859 posts in this topic

Recommended Posts


GRRRRRR... lost bluetooth again...

Has anyone ever seen a thing like this? ie after lunch i had bluetooth after that i left the hack on and when i returned home i no longer had bluetooth.
I turned on the hackintool and verified that the entries in the ethernet and bluetooth folder had changed order by themselves and in the list of ports the port of my Fenvi T 919 is not present for this reason I created a new USBmap.kext and still without bluetooth.
As you can see in the photos below everything I've just described, can someone help me with this before I pull out the rest of my hair?
Thanks

IMG_0294.jpeg

IMG_0295.jpeg

IMG_0296.jpeg

IMG_0296 2.jpeg

Edited by MorenoAv
  • Sad 1
Link to comment
Share on other sites

3 hours ago, MorenoAv said:

GRRRRRR... lost bluetooth again...

Has anyone ever seen a thing like this? ie after lunch i had bluetooth after that i left the hack on and when i returned home i no longer had bluetooth.
I turned on the hackintool and verified that the entries in the ethernet and bluetooth folder had changed order by themselves and in the list of ports the port of my Fenvi T 919 is not present for this reason I created a new USBmap.kext and still without bluetooth.
As you can see in the photos below everything I've just described, can someone help me with this before I pull out the rest of my hair?
Thanks

 

turn off the hack and disconnect the power supply from the mains for 5 minutes, you will see that the bluetooth returns to you when you turn it back on

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

WiFi and BT are working, sound is working, boot and reboot takes a bit too long. Had to remove FakePCIID.kext so Ethernet is not working.  I was getting reboots after every 10 min. of use. If I remove FakePCIID_Intel_I225-V I get an instant crash after boot. 

Tried to apply I225-V patch but it didn't work.

 

1.thumb.png.e7877ce20de36bc2fdc6c60f2f29915c.png

Link to comment
Share on other sites

For ASUS P5Q PRO MB (LGA 775) hackintoshs which need EFI (legacy boot) of OpenCore 0.6.8 or Clover 5136 to test Big Sur or Monterey please PM me for sharing.

Screen Shot 2021-06-19 at 6.38.37 AM.png

Screen Shot 2021-06-19 at 6.39.52 AM.png

Edited by jsl2000
  • Like 3
Link to comment
Share on other sites

2 hours ago, jsl2000 said:

For ASUS P5Q PRO MB (LGA 775) hackintoshs which need EFI (legacy boot) of OpenCore 0.6.8 or Clover 5136 to test Big Sur or Monterey please PM me for sharing.

Screen Shot 2021-06-19 at 6.38.37 AM.png

Screen Shot 2021-06-19 at 6.39.52 AM.png

I have the same smbios however when I try to open the installer it doesn't let me update it...😩

Tried with NVRAM -> boot-args: -no_compat_check 

Still nothing

677875747_Screenshot2021-06-19at02_05_01.png.c36a233b78654919ea7bc3778387d345.png

Link to comment
Share on other sites

4 hours ago, ombra88 said:

I have the same smbios however when I try to open the installer it doesn't let me update it...😩

Tried with NVRAM -> boot-args: -no_compat_check 

Still nothing

677875747_Screenshot2021-06-19at02_05_01.png.c36a233b78654919ea7bc3778387d345.png

For proper update I have to use iMac19,1 instead of iMac15,1

For example in Gigabyte GA-965P-DS4 (LGA 775)

 

 

Screen Shot 2021-06-19 at 2.22.14 PM.png

Screen Shot 2021-06-19 at 2.22.32 PM.png

Edited by jsl2000
  • Like 2
Link to comment
Share on other sites

@jsl2000 how well do the GT710 and GT730 cards perform for you in Monterey? I'm thinking about upgrading my X79 but with the graphics card shortage these are pretty much the only card options available. I would have preferred getting a Radeon of some kind.

Edited by Riley Freeman
Link to comment
Share on other sites

12 minutes ago, Riley Freeman said:

@jsl2000 how well do the GT710 and GT730 cards perform for you in Monterey? I'm thinking about upgrading my X79 but with the graphics card shortage these are pretty much the only card options available. I would have preferred getting a Radeon of some kind.

According to my experience and testing with other GPUs GT710/GT730 performs around IGPU HD4000.

IGPU HD4600 is better than these 2.

My advice is RX560, RX570 or RX580 perform much better and can be used until Mac OS 13 coming.

4 hours ago, Middleman said:

Finally managed to install it on my Z490 Aorus Xtreme with i9-11900K also, but the GPUs including GTX1060 don't have any acceleration.

Without Nvidia web driver GTX1060 can not get hardware acceleration at 10.14.x or higher !

Link to comment
Share on other sites

17 minutes ago, jsl2000 said:

According to my experience and testing with other GPUs GT710/GT730 performs around IGPU HD4000.

IGPU HD4600 is better than these 2.

My advice is RX560, RX570 or RX580 perform much better and can be used until Mac OS 13 coming.

 

I want to get a RX560 but it's pretty much impossible right now. Even second-hand. So I'll likely end up having to get a GT710/730. So long as the UI is smooth and not choppy I guess it'll do.

Link to comment
Share on other sites

1 hour ago, jsl2000 said:

According to my experience and testing with other GPUs GT710/GT730 performs around IGPU HD4000.

IGPU HD4600 is better than these 2.

My advice is RX560, RX570 or RX580 perform much better and can be used until Mac OS 13 coming.

Without Nvidia web driver GTX1060 can not get hardware acceleration at 10.14.x or higher !

I switched to iMacPro1,1 and iMac19,1 and it doesn't boot from r9 290x but only from iGPU 🙄. Any idea?

Under system report both GPUs are perfectly recognized though 

Link to comment
Share on other sites

3 minutes ago, ombra88 said:

I switched to iMacPro1,1 and iMac19,1 and it doesn't boot from r9 290x but only from iGPU 🙄. Any idea?

Under system report both GPUs are perfectly recognized though 

Can you show your hardware signature ?

LGA 775 Hackintoshs have no IGPU.

For those higher than Z77 (Ivy Bridge) with IGPU can select boot order of IGPU or dGPU in BIOS.

  • Thanks 1
Link to comment
Share on other sites

7 minutes ago, jsl2000 said:

Can you show your hardware signature ?

LGA 775 Hackintoshs have no IGPU.

For those higher than Z77 (Ivy Bridge) with IGPU can select boot order of IGPU or dGPU in BIOS.

 

Haswell LGA 1150 and R9 290x

-CPU: i7 4770K

-MB: Asus Z87-K

-GPU: AMD R9 290X 

Link to comment
Share on other sites

12 minutes ago, ombra88 said:

 

 

Haswell LGA 1150 and R9 290x

-CPU: i7 4770K

-MB: Asus Z87-K

-GPU: AMD R9 290X 

For your hardware its default is IGPU HD4600.

You can try to change it in BIOS>Advanced>SystemAgent(SA)Configuration>Graphics>PCIe instead of IGPU (default)

and maybe should add agdpmod=pikera to prevent blank screen during booting.

Edited by jsl2000
  • Thanks 1
Link to comment
Share on other sites

20 minutes ago, jsl2000 said:

For your hardware its default is IGPU HD4600.

You can try to change it in BIOS>Advanced>SystemAgent(SA)Configuration>Graphics>PCIe instead of IGPU (default)

and maybe should add agdpmod=pikera to prevent blank screen during booting.

I see, tried with it but nothing still stuck with apple logo and scattered lines when booting.

It's crazy to leave dGPUs doing nothing for this new os..😤

Link to comment
Share on other sites

Guest 5T33Z0
19 minutes ago, D-an-W said:

Hi folks, got a spare partition with Big Sur currently installed. Is Monterey now possible on my ancient hardware (In Sig)?

 

Read the thread. There are guides on how to get IvyBridge working. It's complicated but not impossible. But if you ask me, it's not worth it.

Link to comment
Share on other sites

Guest 5T33Z0
On 6/16/2021 at 11:49 PM, MacWill said:

 

Captura de Tela 2021-06-16 às 18.41.12.png

 

Thanks for the screenshot. What does "ID do DIspositvo" mean in english. I don't have that in my list.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...