mboy Posted June 16, 2021 Share Posted June 16, 2021 1 hour ago, ameenjuz said: Make sure do not use BrcmBluetoothInjector.kext on macOS 12 If you want to install kexts in S/L/E or L/E then install these 3 kexts (BlueToolFixup.kext BrcmFirmwareRepo.kext BrcmPatchRAM3.kext) If you inject kexts with OpenCore or Clover then use (BlueToolFixup.kext BrcmFirmwareData.kext BrcmPatchRAM3.kext) Removed BrcmBluetoothInjector.kext. Still not working. Also BlueToolFixup.kext is not loading; BrcmFirmwareRepo and BrcmPatchRAM3 kexts are loaded. Link to comment Share on other sites More sharing options...
anonymous writer Posted June 16, 2021 Share Posted June 16, 2021 (edited) On 6/15/2021 at 4:19 PM, ameenjuz said: I have sleep problem do not wake my machine after sleep blackscreen occure If you are still searching for for a solution, read this. https://github.com/acidanthera/bugtracker/issues/1676 For me this help, but not after sleep. https://www.hackintosh-forum.de/forum/thread/35703-kurzanleitung-high-sierra-mojave-catalina-und-bigsur-auf-asus-zenbook-ux330uak/?postID=705772#post705772 Edited June 16, 2021 by anonymous writer Link to comment Share on other sites More sharing options...
MacWill Posted June 16, 2021 Share Posted June 16, 2021 6 hours ago, 5T33Z0 said: Thanks for sharing. I had a llok at it. And I have no idea why Ethernet is working for you at all. You are using a setup for ethernet which was used for catalina which is no longer required. Yoiu are using Deviceid 0x15f28086 and then you rename it with the Kernel Patch to 0x15F30000 which was okay for Catalina. This is no longer required since on Big Sur supports this controller natively. On Top of that you are using FakePCIID which does the same thing. IntelMausi is not even needed for this Controller anyway. This is only required for the Vision D. This EFI looks like it was traken from a vsion D. What is this for: HS80211Family.kext/Contents/PlugIns/IO80211NetBooter.kext and this: HS80211Family.kext Wifi? Your Fake_PCIID 225 kext is the first in the order of Kexts but Lilu, VirtualSMC should be first due to dependencies of other kext. All in all I am actually astounded that it even boots… EFI boot is on a memory card. I have Catalina and Monterey installed. Right now I need two different cards to start each system. Mainly because of the HS80211family.kext & AirPortAtheros40.kext (TP-Link TL-WDN480) which in the Monterey EFI I inserted the line "com.apple.iokit.IO80211FamilyLegacy". It boots but does not load temporarily. On Catalina Ethernet conflicts with wifi and I preferred to leave it disabled. The only difference between the two cards is the line inserted in AirPortAtheros40-1.kext and the arguments in nvram. I'm going to change the order of the kext. Thanks Link to comment Share on other sites More sharing options...
MacWill Posted June 16, 2021 Share Posted June 16, 2021 50 minutes ago, MacWill said: EFI boot is on a memory card. I have Catalina and Monterey installed. Right now I need two different cards to start each system. Mainly because of the HS80211family.kext & AirPortAtheros40.kext (TP-Link TL-WDN480) which in the Monterey EFI I inserted the line "com.apple.iokit.IO80211FamilyLegacy". It boots but does not load temporarily. On Catalina Ethernet conflicts with wifi and I preferred to leave it disabled. The only difference between the two cards is the line inserted in AirPortAtheros40-1.kext and the arguments in nvram. I'm going to change the order of the kext. Thanks Link to comment Share on other sites More sharing options...
Stefanalmare Posted June 16, 2021 Share Posted June 16, 2021 (edited) 5 hours ago, Hervé said: No, those would most likely have already been setup and they will not prevent this lack of graphics initialisation/boot to desktop. The issue is the Windows server problem when auto-login is not enabled. This is the 1st and quick thing to do after initial installation and 1st boot setup before any reboot is made and until OCLP 0.1.7 is applied. Failing that this is what happens. 'been there myself. The alternative is to make a separate installation of a pre-Monterey macOS version (Big Sur, Catalina or whatever), set that up with auto-login and upgrade that particular build to Monterey. In my particular case (Ivy Bridge/HD4000 Dell Latitude E6230), I found the build to be unstable and unreliable: runs very hot, CPU mostly at Turbo speeds, could only install with OC and boot patched system with Clover (!), sudden crashes out of the blue and KP on restart (apparently on IOPCIFamily kext). My conclusion is that this will need a lot more work and subsequent more developed/stable versions of Monterey to be useable/run properly. Thank you for tip. For me doesn't work. After Big Sur install, disable auto login, upgrade to Monterey and patching, I select Monterey in picker, start to boot 1 sec and after reboot directly in recovery without seeing picker anymore. Edited June 16, 2021 by Stefanalmare Link to comment Share on other sites More sharing options...
ITzTravelInTime Posted June 17, 2021 Share Posted June 17, 2021 15 hours ago, jsl2000 said: Thanks and can you share your config.plist for Monterey because my Asus P5Q PRO with GT 730 were quite similar to your hardware. Up to now it can boot to 11.5 beta 2 without any issue, but 12 beta it can show desktop only (unable to load Finder properly). Actually try adding the mousse kext if you haven't already, if it boots big sur i think it's reasonable to assume you just need this kext for the additional emulated cpu instructions. Link to comment Share on other sites More sharing options...
jsl2000 Posted June 17, 2021 Share Posted June 17, 2021 (edited) On 6/17/2021 at 9:13 AM, ITzTravelInTime said: Actually try adding the mousse kext if you haven't already, if it boots big sur i think it's reasonable to assume you just need this kext for the additional emulated cpu instructions. Thanks and I have solved it by myself. It can boot by OpenCore 0.6.8 or Clover 5136 now. Just one issue bothered me: Firefox 89.0.1 is not working smoothly as at Big Sur which frequently unexpected quit during operation. No such an issue with Safari or Google Chrome. [Edit] Both Firefox and Hackintool opened and immediately quit at Monterey beta1 in my LGA 775 mackintosh (Asus P5Q PRO). Hope they can be fixed at beta2 ASAP ! [Edit2] After tuning my config.plist both Firefox & Hackintool work normally now if booted with OpenCore 0.6.8. [Edit3] But Hackintool still opened and quit immediately if booted by Clover 5136 and Problem Report for Hackintool was attached here: Problem Report for Hackintool.rtf [Edit4] In Clover 5136 I need use old DSDT-EHC1.aml instead of new DSDT-EH01.aml to fix Hackintool immediate quit issue. Now both Firefox and Hackintool work normally after booted with Clover 5136 or Opencore 0.6.8. Edited June 18, 2021 by jsl2000 1 Link to comment Share on other sites More sharing options...
Middleman Posted June 17, 2021 Share Posted June 17, 2021 Happy to say I finally got Monterey going on my GA-Z170N-WIFI (Skylake) RX550 build! Biggest issue I faced was mainly using the USBMap kext. My USB devices and ports simply wouldn't respond with that enabled so I had to revert back to USBInjectAll and enable XHCIPortlimit. Also used a SSDT-GPU-Spoof for the RX550 as it wasn't natively enabled. Link to comment Share on other sites More sharing options...
LockDown Posted June 17, 2021 Share Posted June 17, 2021 1 hour ago, jsl2000 said: Thanks and I have solved it by myself. What solved it? Link to comment Share on other sites More sharing options...
jsl2000 Posted June 17, 2021 Share Posted June 17, 2021 (edited) 21 hours ago, ellaosx said: What solved it? Nothing special. Just double check my config.plist & related kexts for Clover 5136 and OpenCore 0.6.8 Need boot-argument: -lilubetaall -wegbeta -no_compat_check amfi_get_out_of_my_way=1 and newest Lilu, AppleALC, & Whatevergreen Edited June 18, 2021 by jsl2000 Link to comment Share on other sites More sharing options...
Middleman Posted June 17, 2021 Share Posted June 17, 2021 Not quite working on my Z170. Seems the biggest issue I have at the moment is display wake from sleep - once the system goes to sleep, nothing that I do seems to wake it up. Link to comment Share on other sites More sharing options...
Middleman Posted June 17, 2021 Share Posted June 17, 2021 Okay I seemed to have partially resolve this. I found what seems to be a warning of sorts in the screensaver section indicating that the display will go to sleep before the screensaver will kick in: When I set this to 1 min, my display could finally wake from sleep. Separate to this I also found a potential fix from Dortania guide, in the form of adding the CFG,CFG_USE_AGDC key to GPU's device properties in EFI. Link to comment Share on other sites More sharing options...
Stefanalmare Posted June 17, 2021 Share Posted June 17, 2021 17 minutes ago, Middleman said: Okay I seemed to have partially resolve this. I found what seems to be a warning of sorts in the screensaver section indicating that the display will go to sleep before the screensaver will kick in: When I set this to 1 min, my display could finally wake from sleep. Separate to this I also found a potential fix from Dortania guide, in the form of adding the CFG,CFG_USE_AGDC key to GPU's device properties in EFI. Set screen saver start time lower than sleep display. Link to comment Share on other sites More sharing options...
bisdak4920 Posted June 17, 2021 Share Posted June 17, 2021 20 hours ago, mboy said: Gmyle BT Broadcom 20702A0 USB working in BS not working in Monterery. i added BTFixup, BRCMBTInjector, BRCMFirmwarerepo and BRCMPatchRAM3 kexts to /L/E. Any ideas on how to get this dongle to work natively ? You need 3 kext to make it work. BTFixup, BRCMPatchRAM3 and BRCMFirmwaredata. Enjoy your USB BT. Link to comment Share on other sites More sharing options...
asdesoso Posted June 17, 2021 Share Posted June 17, 2021 2 hours ago, bisdak4920 said: You need 3 kext to make it work. BTFixup, BRCMPatchRAM3 and BRCMFirmwaredata. Enjoy your USB BT. Anyone has the BlueToolFixUp.kext? I also have the BCM20702A0. Thanks. Link to comment Share on other sites More sharing options...
PoMpIs Posted June 17, 2021 Share Posted June 17, 2021 (edited) 1 hour ago, asdesoso said: Anyone has the BlueToolFixUp.kext? I also have the BCM20702A0. Thanks. This?: https://drive.google.com/file/d/1TdoU2Sx9nUTgbAAECOEWSv6pIZGL10GJ/view?usp=sharing All Kext Bluetooth Monterey ( broadcom ) https://drive.google.com/file/d/1G7qK7Y-Oi6t_Ba0Bbcjqgm3LXzU6V7Vi/view?usp=sharing Regards Edited June 17, 2021 by PoMpIs 2 1 Link to comment Share on other sites More sharing options...
mboy Posted June 17, 2021 Share Posted June 17, 2021 4 hours ago, bisdak4920 said: You need 3 kext to make it work. BTFixup, BRCMPatchRAM3 and BRCMFirmwaredata. Enjoy your USB BT. now working placing these kexts in opencore kexts folder; I can connect headphones with BT; however my iphone pairs but then immediately disconnects, it was working in Big Sur. 1 Link to comment Share on other sites More sharing options...
devillived666 Posted June 17, 2021 Share Posted June 17, 2021 Installed and took forever to boot. Are there any additional boot args we should be using or changes to config.plist if our stuff worked on big sur? Link to comment Share on other sites More sharing options...
asdesoso Posted June 17, 2021 Share Posted June 17, 2021 3 hours ago, PoMpIs said: This?: https://drive.google.com/file/d/1TdoU2Sx9nUTgbAAECOEWSv6pIZGL10GJ/view?usp=sharing All Kext Bluetooth Monterey ( broadcom ) https://drive.google.com/file/d/1G7qK7Y-Oi6t_Ba0Bbcjqgm3LXzU6V7Vi/view?usp=sharing Regards Thanks for your kexts. But I tried with BCM20702A0 and other BCM2046B1, but both doesn´t work. I don´t know if I need set for these kexts a minimum kernel version or not. Cheers. 1 Link to comment Share on other sites More sharing options...
PoMpIs Posted June 17, 2021 Share Posted June 17, 2021 (edited) 44 minutes ago, asdesoso said: Thanks for your kexts. But I tried with BCM20702A0 and other BCM2046B1, but both doesn´t work. I don´t know if I need set for these kexts a minimum kernel version or not. Cheers. I do not have the laptop here, I'm going to look for it, but I do not remember the bluetooth model of the Lenovo 😅 Then I look at it, but it works ... I connected the iPhone ... to test it. I put the drivers because I don't like to disable it in the bios, but I never use it ... 🤷♀️ Regards Edited June 17, 2021 by PoMpIs 1 Link to comment Share on other sites More sharing options...
mboy Posted June 17, 2021 Share Posted June 17, 2021 4 hours ago, mboy said: now working placing these kexts in opencore kexts folder; I can connect headphones with BT; however my iphone pairs but then immediately disconnects, it was working in Big Sur. In Monterey these options are missing from the BT menu when pressing option-shift: Link to comment Share on other sites More sharing options...
eSaF Posted June 17, 2021 Share Posted June 17, 2021 Guys - Hate to be a killjoy but don't forget Monterey is at it's first Beta, I don't know how much of it is based on BS and even that is still in Beta stage so don't expect too much of all things working as expected. Until a few more Beta releases and the OC Devs get a grip of things, we will encounter quite a few anomalies on the way. 5 Link to comment Share on other sites More sharing options...
PoMpIs Posted June 17, 2021 Share Posted June 17, 2021 @asdesoso. I had not looked at about this mac, but my bluetooth comes out like this: It does not show as much information as in big sur? ¿? Regards Link to comment Share on other sites More sharing options...
asdesoso Posted June 17, 2021 Share Posted June 17, 2021 10 minutes ago, PoMpIs said: @asdesoso. I had not looked at about this mac, but my bluetooth comes out like this: It does not show as much information as in big sur? ¿? Regards Yes, Monterey shows less information than Big Sur in Bluetooth section. What chipset do you have, I can´t enable it. Thanks. 1 Link to comment Share on other sites More sharing options...
PoMpIs Posted June 17, 2021 Share Posted June 17, 2021 14 minutes ago, asdesoso said: Yes, Monterey shows less information than Big Sur in Bluetooth section. What chipset do you have, I can´t enable it. Thanks. Well I think it is this model: BCM92070MDLENO It is that I do not have windows installed on the laptop, and I have only taken the bluetooth capture, and I am not next to the laptop again until tomorrow Regards 1 Link to comment Share on other sites More sharing options...
Recommended Posts