iCanaro Posted July 31, 2020 Share Posted July 31, 2020 (edited) 10 hours ago, mick3lson said: Puoi spiegare quali sono i passaggi per creare due partizioni efi sullo stesso disco, provo a installare il triplo avvio con Windows 10 Big Sur e Ubuntu Linux con bootloader a cielo aperto, Clover non ha alcun problema a gestire tre partizioni con tre sistemi operativi sullo stesso disco . plan and prepare the disc first, but you can also do it in the process of work. With GParted or PartedMagic or similar applications, in addition to the traditional EFI 200Mb FAT32, you create other primary partitions of 200 or 300MB FAT32 with boot/esp flags (otherwise they are not EFI and would not start anything) and as a label you can call them EFI1 EFI2 EFI3 etc.... In these EFI you can arrange the bootloaders you prefer, and if the BIOS does not natively recognize the entries, they can easily be added with a LivePE and BOOTICE, or directly from windows always with BOOTICE PS: These EFi you can allocate in a row side by side, or place each one next to the designated OS, both solutions are fine. Clover and the BIOS start everything smoothly.... OC, on the other hand, struggles more Edited July 31, 2020 by iCanaro 1 Link to comment Share on other sites More sharing options...
TrickyHunter Posted July 31, 2020 Share Posted July 31, 2020 7 hours ago, TrickyHunter said: Just to report on this one. The temporary solution is to change SMBIOS to MacPro7,1 (instead of iMacPro1,1 or iMac19,1) and use agdpmod=ignore (instead of agdpmod=pikera) in the boot args. This solution is mentioned in the OpenCore guide at here (search for Black screen after IOConsoleUsers: gIOScreenLock... on Navi). Now, I'm not sure this is the proper fix to be honest. But for now it'd work for beta 3 and hopefully it'd be fixed by the new WhateverGreen. FYI, @Alex HQuest More on this one. TL;DR: I spoke too soon. This only reduces the chance of black screen to about 25%. But it still happens. I managed to get some logs from the Console.app when this happens: Basically the below error appears in Console, and it appears hundreds of times per minutes. WindowServer [ERROR] - Unable to find display pipe for IOFB service Google the error gives me links to a lot of DisplayLink posts unrelated to Hackintosh at all. I have a feeling maybe in this case it's the beta 3 that has issues? Link to comment Share on other sites More sharing options...
chris1111 Posted July 31, 2020 Share Posted July 31, 2020 9 hours ago, luky35 said: I like the Reset NVRAM icon so I ask where to get it https://github.com/blackosx/OpenCanopyIcons 2 Link to comment Share on other sites More sharing options...
luky35 Posted July 31, 2020 Share Posted July 31, 2020 (edited) 51 minutes ago, chris1111 said: https://github.com/blackosx/OpenCanopyIcons Thank you very much, Edited July 31, 2020 by luky35 1 Link to comment Share on other sites More sharing options...
chris1111 Posted July 31, 2020 Share Posted July 31, 2020 39 minutes ago, luky35 said: Thank you very much, Choose the file in Set2/Tool/ResetNVRAM.icns rename Tool.icns Link to comment Share on other sites More sharing options...
chris1111 Posted July 31, 2020 Share Posted July 31, 2020 (edited) New version of My simple theme Black Version Spoiler Black version Selector30.zip Edited July 31, 2020 by chris1111 Change for Black version Selector30 1 3 Link to comment Share on other sites More sharing options...
Alex HQuest Posted July 31, 2020 Share Posted July 31, 2020 @TrickyHunter I know having two different video cards on OS X historically had odd results, and sometimes these are seen even on Windows... I still would recommend, at least for a troubleshooting exercise, you to remove your Ti card and whichever way you use to disable this Ti card, leaving only the XT card in the system, and then go from there. I would not rule the VBIOS either - sometimes some enhancements causes those oddities. Which is why I personally opt for the reference models (while using a water block to make them dead silent). Last but not least, check if there is an updated VBIOS for yours and give that a try. Wouldn't hurt if done correctly. Link to comment Share on other sites More sharing options...
luky35 Posted July 31, 2020 Share Posted July 31, 2020 40 minutes ago, chris1111 said: Choose the file in Set2/Tool/ResetNVRAM.icns rename Tool.icns Thank thank thank 1 Link to comment Share on other sites More sharing options...
Diepnguyen90hn Posted July 31, 2020 Share Posted July 31, 2020 Hi all, I've installed Big Sur beta 3 but how to make volume shortcut and bright shortcut work? before it worked well with Catalina. I just use Karabiner to change to F1,F2 and f3,4 Thank you Link to comment Share on other sites More sharing options...
chris1111 Posted July 31, 2020 Share Posted July 31, 2020 For those who would like the Linux volume icon on their Big Sur Boot with OpenCore ☞ See this post 2 Link to comment Share on other sites More sharing options...
markl18 Posted July 31, 2020 Share Posted July 31, 2020 hi does any one know why my alcl283 doesn't want to succeed in booting I did alcid=5 or 44 but it still fails Link to comment Share on other sites More sharing options...
ergot Posted July 31, 2020 Share Posted July 31, 2020 Guys, Stuck on booting...any idea what it can be? Seems like related to Apple NVME controller... Link to comment Share on other sites More sharing options...
jmacie Posted July 31, 2020 Share Posted July 31, 2020 (edited) since it seems slow 'til next beta, is there anyone who might take a look at my OC config.plist and debug txt on my Asus x99. On verbose it stops at pci configuration begin. I have never had an opencore for this board and it's getting hopeless over here. Thanks for any info, johnm I have gone through Dortania troubleshooting config.plist opencore-2020-07-31-202427.txt Broadwell-E OC 0.6.0 Good in sanity check Asus x99 pro usb3.1 i7-6800k Msi Radeon RX480 Edited July 31, 2020 by jmacie 1 Link to comment Share on other sites More sharing options...
Max.1974 Posted July 31, 2020 Share Posted July 31, 2020 3 hours ago, jmacie said: since it seems slow 'til next beta, is there anyone who might take a look at my OC config.plist and debug txt on my Asus x99. On verbose it stops at pci configuration begin. I have never had an opencore for this board and it's getting hopeless over here. Thanks for any info, johnm I have gone through Dortania troubleshooting config.plist opencore-2020-07-31-202427.txt Broadwell-E OC 0.6.0 Good in sanity check Asus x99 pro usb3.1 i7-6800k Msi Radeon RX480 Are you try install ? You need put this args on Nvram 1 Link to comment Share on other sites More sharing options...
jmacie Posted August 1, 2020 Share Posted August 1, 2020 @Max.1974 Thank you for this info, but I'm still stuck at pci configuration begin. I apologise for being off topic, and appreciate you helping. I'm going to keep trying with this new info you gave me. I may just go to Catalina to try to build a 0.5.9 install to get a bootloader working for my motherboard, then move forward. 1 Link to comment Share on other sites More sharing options...
AlfredoM Posted August 1, 2020 Share Posted August 1, 2020 On 7/24/2020 at 7:36 PM, pico joe said: used the @fusion71au methods to snapshots disabled, and follow step by step success story pico@picos-iMac / % sw_vers ProductName: macOS ProductVersion: 11.0 BuildVersion: 20A5323l pico@picos-iMac / % kextstat | grep AirPort 74 0 0xffffff8001e64000 0x127000 0x127000 com.apple.driver.AirPort.Atheros40 (700.74.5) 9753F22E-5C85-3E95-B543-0870CF03838A <73 43 14 8 6 5 3 1> pico@picos-iMac / % can you please write to me how you got this TP Link WDN 4800 with Open Core 0.6 up and running in Big Sure? In Catalina 10.15.6, even with Open Core 0.6, it runs flawlessly. I also have this WLAN card in my Hacki. Link to comment Share on other sites More sharing options...
TrickyHunter Posted August 1, 2020 Share Posted August 1, 2020 11 hours ago, Alex HQuest said: @TrickyHunter I know having two different video cards on OS X historically had odd results, and sometimes these are seen even on Windows... I still would recommend, at least for a troubleshooting exercise, you to remove your Ti card and whichever way you use to disable this Ti card, leaving only the XT card in the system, and then go from there. I would not rule the VBIOS either - sometimes some enhancements causes those oddities. Which is why I personally opt for the reference models (while using a water block to make them dead silent). Last but not least, check if there is an updated VBIOS for yours and give that a try. Wouldn't hurt if done correctly. Yeah, I know man. It's possible that the Ti is causing issues. I'm a bit too lazy to do that simply because I really need the Ti there for Windows so even if it worked I cannot remove it. And good point on the VBIOS. I'll try have a look at the update. 1 Link to comment Share on other sites More sharing options...
gulios Posted August 1, 2020 Share Posted August 1, 2020 (edited) On 7/9/2020 at 3:23 PM, lasn2096 said: Hello, I made a successful installation of Big Sur on my Lenovo 330 15IKB i3 notebook thanks to @Cyberdevs, but in my case with some KP like VoodooInput but solved, now I am new to this and I need your help in some points. 1. I have a Broadcom BCM94352Z that doesn't work, is there a kext for this? Bluetooh works very well. 2. Someone share a guide on how to build kexts from master. 3. Notice a forced closing when opening TextEdit in Big Sur. Is it a system bug? or just mine ... Did you resolve wifi for BCM94352Z ? I have BS beta 3, latest kexts, BT works fine but no wifi Tried brcmfx-driver=2 without success ;( Edited August 1, 2020 by gulios Link to comment Share on other sites More sharing options...
innerd Posted August 1, 2020 Share Posted August 1, 2020 If you're using airportbrcmfixup 2 Link to comment Share on other sites More sharing options...
gulios Posted August 1, 2020 Share Posted August 1, 2020 48 minutes ago, innerd said: If you're using airportbrcmfixup Thank you ! it works now In OC just addedhttps://github.com/acidanthera/bugtracker/issues/1021#issuecomment-657098236 Link to comment Share on other sites More sharing options...
OrpheusInHell Posted August 1, 2020 Share Posted August 1, 2020 FYI, I just compiled Opencore and now my boot drive is indeed macOS and no preboot anymore. 2 Link to comment Share on other sites More sharing options...
Max.1974 Posted August 1, 2020 Share Posted August 1, 2020 1 hour ago, OrpheusInHell said: FYI, I just compiled Opencore and now my boot drive is indeed macOS and no preboot anymore. Hi Orpheus, would nice if you share with us, thanks!!! Link to comment Share on other sites More sharing options...
Alex HQuest Posted August 1, 2020 Share Posted August 1, 2020 Slightly off-topic, but as many folks are asking about dual boot. TL;DR: Yes, just don't patch ACPI. 1 2 Link to comment Share on other sites More sharing options...
OrpheusInHell Posted August 2, 2020 Share Posted August 2, 2020 16 hours ago, Max.1974 said: Hi Orpheus, would nice if you share with us, thanks!!! I'm on a ryzen system mate. 1 1 Link to comment Share on other sites More sharing options...
iamprabhuantony Posted August 2, 2020 Share Posted August 2, 2020 4 hours ago, OrpheusInHell said: I'm on a ryzen system mate. Please share your EFI bro! 1 Link to comment Share on other sites More sharing options...
Recommended Posts