Ludox Posted October 15, 2020 Share Posted October 15, 2020 10 minutes ago, corint1 said: I don't believe you ... You do not believe me? According to Te do I tell lies? 1 Link to comment Share on other sites More sharing options...
corint1 Posted October 15, 2020 Share Posted October 15, 2020 I said I don't believe you, not that you're lying ... and I was referring strictly to the clover ... let's see what we can do and not get annoyed in vain ... you shared an OC config file and no of clover as I think everyone expected ... 1 Link to comment Share on other sites More sharing options...
kushwavez Posted October 15, 2020 Share Posted October 15, 2020 29 minutes ago, ludox said: use done this config .. remove or insert what you need for your hardware configuration and test .. and let me know opencore 6.2 config.plist.zip Thanks for that, unfortunately exactly the same with your config.plist. No new updates in Software Update, with Utility it's downloading 12 GB. (NVRAM is reseted again). Anyway no problem, I have time. Interesting: Yesterday I updated my 3 systems from Beta 6 to 9 without any issues/changes with SIP enabled (Clover v5124) Link to comment Share on other sites More sharing options...
eSaF Posted October 15, 2020 Share Posted October 15, 2020 Ok let's take the heat out of the Thread, I think because we are all of different languages, our choice of words in translation may come across unintentionally abrasive to others which maybe looked upon as unfriendly to the original poster I am sure no malice was intended. 7 1 Link to comment Share on other sites More sharing options...
JorgeMax Posted October 15, 2020 Share Posted October 15, 2020 Here's how: Spoiler See if "authenticated-root" is active My config.plist with the key "SecureBootModel = Disable" SIP: 67000000 OpenCore 0.6.2 shows 3.82GB and the update was made without error In Clover 5124 the SIP is at 0x67, and it gives me the same status as the SIP in the terminal But as Clover doesn't have the "SecureBootModel" key it shows me more than 12GB of download 2 Link to comment Share on other sites More sharing options...
kushwavez Posted October 15, 2020 Share Posted October 15, 2020 2 minutes ago, JorgeMax said: Here's how: Reveal hidden contents See if "authenticated-root" is active My config.plist with the key "SecureBootModel = Disable" SIP: 67000000 OpenCore 0.6.2 shows 3.82GB and the update was made without error In Clover 5124 the SIP is at 0x67, and it gives me the same status as the SIP in the terminal But as Clover doesn't have the "SecureBootModel" key it shows me more than 12GB of download on Clover to disable auth-root boot with CsrActiveConfig=0xFFF 1 Link to comment Share on other sites More sharing options...
OrpheusInHell Posted October 15, 2020 Share Posted October 15, 2020 Fingers crossed... 2 2 Link to comment Share on other sites More sharing options...
OrpheusInHell Posted October 15, 2020 Share Posted October 15, 2020 Well, that was flawless !!! 3 Link to comment Share on other sites More sharing options...
Ludox Posted October 15, 2020 Share Posted October 15, 2020 3 hours ago, ludox said: Solution since had the same problem to upgrade from 9 to 10Since clover was unable to download the 4gb 10 and returned me to 12gb here's what I did:1-I temporarily booted with Opencore 6.2 with all upgrading kexts on a USB stick2- 4gb detection in normal download3-After the first reboot, restart with the Clover 5124 until the update installation is complete.4- Starting with normal Clover 5124 BG beta 10, all perfectly working. Here is the proof of the final result of my above procedure 1 1 1 Link to comment Share on other sites More sharing options...
Sherlocks Posted October 15, 2020 Share Posted October 15, 2020 i think beta10 performance is not good.also in safari, youtube playback is error.Sent from my SM-N960N using Tapatalk 1 Link to comment Share on other sites More sharing options...
erice Posted October 15, 2020 Share Posted October 15, 2020 @jlrycm Hello. I have a card with the same chip as you. Would you be kind enough to share your config.plist? Thanks anyway. Link to comment Share on other sites More sharing options...
naiclub Posted October 15, 2020 Share Posted October 15, 2020 Just now, ludox said: Here is the proof of the final result of my above procedure More importantly, I don't like OC very much. 1 Link to comment Share on other sites More sharing options...
d5aqoep Posted October 15, 2020 Share Posted October 15, 2020 (edited) Updated both my PCs in the sig to Beta 10. Following things are crucial: SecureBootModel = Disable in config.plist. You can use and Plist Editor or even OpenCore Configurator for it Update to latest OpenCore 0.6.3 from dropdown list here Update to latest Lilu, Whatevergreen, AppleALC and VirtualSMC kexts from link above Installer was glitching out, failing 1st time and Z390 one which was OTA updated from Beta 1 continuously. After update to beta 10 midway, OpenCore lost boot menu. Did a fresh install of Beta 9 and then the update to Beta 10 went smooth. Too much drama. Edited October 15, 2020 by d5aqoep 2 1 Link to comment Share on other sites More sharing options...
corint1 Posted October 15, 2020 Share Posted October 15, 2020 (edited) 1 hour ago, ludox said: Here is the proof of the final result of my above procedure sorry ... yes ...you have right ...clover 5124 boot on beta 10 ... but , can you help me with voodooIC2 ? ... on this version clover dont load voodooInput.kext ...from any place ... thank you ... Edited October 15, 2020 by corint1 Link to comment Share on other sites More sharing options...
OrpheusInHell Posted October 15, 2020 Share Posted October 15, 2020 As far as I'm concerned the graphics drivers seemed to have improved a lot (RX 5700XT). I had some video playback issues when resizing the player in different applications. Now it seems to work just fine. Link to comment Share on other sites More sharing options...
Ludox Posted October 15, 2020 Share Posted October 15, 2020 19 minutes ago, corint1 said: sorry ... yes ...you have right ...clover 5124 boot on beta 10 ... but , can you help me with voodooIC2 ? ... on this version clover dont load voodooInput.kext ...from any place ... thank you ... I try, attach your clover efi if you use it for Big Sur, and opencore Link to comment Share on other sites More sharing options...
corint1 Posted October 15, 2020 Share Posted October 15, 2020 (edited) 22 minutes ago, ludox said: I try, attach your clover efi if you use it for Big Sur, and opencore thank you ... https://mab.to/X4gM5AxYh use this efi for Lenovo Ideapad 520S Edited October 15, 2020 by corint1 Link to comment Share on other sites More sharing options...
BALDY_MAN Posted October 15, 2020 Share Posted October 15, 2020 Hi All. thanks for your help. I managed to update my Hack at last. I made a new EFI 0.6.3. I had to enable SIP. (Couldn't up date if disabled) SecureBootMode set to disabled 4 Link to comment Share on other sites More sharing options...
Ludox Posted October 15, 2020 Share Posted October 15, 2020 23 minutes ago, corint1 said: thank you ... https://mab.to/X4gM5AxYh use this efi for Lenovo Ideapad 520S i removed the voodoo kexts i added other options and drives try like that (clover) EFI 5124 Ok.zip 23 minutes ago, corint1 said: Link to comment Share on other sites More sharing options...
corint1 Posted October 15, 2020 Share Posted October 15, 2020 22 minutes ago, ludox said: i removed the voodoo kexts i added other options and drives try like that (clover) bad luck ... KP ... right after boot .... I'm sad, even though I'm a fan of clover, but I think I'll have to go to OC forever ... even though I have sleep problems with OC ... will restart with KP or only KP .... or do not go to sleep ... and the battery will discharge ... Link to comment Share on other sites More sharing options...
eSaF Posted October 15, 2020 Share Posted October 15, 2020 7 minutes ago, corint1 said: even though I have sleep problems with OC Could be a USB port remaining opened that is causing sleep problem - did you map your USB ports or are you using the USBInjectAll.kext? Link to comment Share on other sites More sharing options...
Ludox Posted October 15, 2020 Share Posted October 15, 2020 Lenovo vga intel hd 4400 or? Link to comment Share on other sites More sharing options...
Ludox Posted October 15, 2020 Share Posted October 15, 2020 To clarify The procedure I did is on the ASUS Z87 plus in signature, as can be seen in the photos. Tonight I update the Acer E1 notebook in signature, it may be that the above procedure is not good for it, or just the configuration it already has for the beta 9 and it works, or if there are problems I will have to proceed differently .. This I will find out later. Link to comment Share on other sites More sharing options...
eSaF Posted October 15, 2020 Share Posted October 15, 2020 51 minutes ago, BALDY_MAN said: I made a new EFI 0.6.3. I had to enable SIP. (Couldn't up date if disabled) SecureBootMode set to disabled That is also a finding on my machine. With SIP totally enabled and SecureBootMode set to Disabled was the only way to get the latest update so that is a thought going forward unless the OC Devs and/or Apple change up the game with the next update. 2 Link to comment Share on other sites More sharing options...
corint1 Posted October 15, 2020 Share Posted October 15, 2020 4 minutes ago, eSaF said: Could be a USB port remaining opened that is causing sleep problem - did you map your USB ports or are you using the USBInjectAll.kext? I tried both options ... with USBInjectAll and a kext generated with the Hackintool application, in which I deleted all inactive ports ... how else can I generate a kext? ... can it be from ssd? I use a toshiba ssd ... I tried all the hibernate modes 0, 3, 25 ... the same thing ... random kp or battery discharge ... 9 minutes ago, ludox said: Tonight I update the Acer E1 notebook in signature, it may be that the above procedure is not good for it, or just the configuration it already has for the beta 9 and it works, or if there are problems I will have to proceed differently .. This I will find out later. do not use for trackpad voodooI2C ? Link to comment Share on other sites More sharing options...
Recommended Posts