eSaF Posted July 10, 2020 Share Posted July 10, 2020 25 minutes ago, eSaF said: You may have a point there because I just swopped out the EFI Folder for the one I used in Beta1, rebooted, cleaned the NVRAM and now all is well so what ever it was is gone. No I celebrated too soon because after a couple of reboots it's back. I will investigate further. 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted July 10, 2020 Share Posted July 10, 2020 Just now, Blu24 said: There is a lot that needs to be fixed. if your still have issues I can configure it for you but it’s better if you do it. To be corrected: Please delete all archived and disabled folders SSDT-EC-USBX(disabled) is missing from your APCI folder also you have not injected your EFI folder. Set to true AppleCpuPmCfgLock, AppleXcpmCfgLock,ApplePanic ScanPolicy set to 0 Remove: booter-fileset-kernel booter-fileset-basesystem(not needed for 0.6.0 issue has been addressed) boot-args: -v keepsyms=1 debug=0x100 alcid=1 slide=1 -lilubetaall (not needed for 0.6.0 issue has been addressed) Let me know how you get on Thanks. Some precisions: USBX is included in USBPorts.kext @AudioGod's kext The BIOS is unlock so AppleCpuPmCfgLock, AppleXcpmCfgLock not needed booter-fileset-kernel booter-fileset-basesystem, lilubetaall are removed in USB. I upload the wrong config.plist I have no sound with alcid=1 on Catalina My Scanpolicy work fine on Catalina My issue: Second stage, macOS Big Sur stuck at less than one minute (with Apple logo and progress bar). I can boot from USB drive. Maybe Important: I try to install Big Sur on external drive connected to USB3 front panel. I let you know other test Link to comment Share on other sites More sharing options...
Blu24 Posted July 10, 2020 Share Posted July 10, 2020 (edited) 51 minutes ago, Matgen84 said: Thanks. Some precisions: USBX is included in USBPorts.kext @AudioGod's kext The BIOS is unlock so AppleCpuPmCfgLock, AppleXcpmCfgLock not needed booter-fileset-kernel booter-fileset-basesystem, lilubetaall are removed in USB. I upload the wrong config.plist I have no sound with alcid=1 on Catalina My Scanpolicy work fine on Catalina My issue: Second stage, macOS Big Sur stuck at less than one minute (with Apple logo and progress bar). I can boot from USB drive. Maybe Important: I try to install Big Sur on external drive connected to USB3 front panel. I let you know other test sorry, This boot-args should work with your Gigabyte Z390 Aorus Master keepsyms=1 debug=0x100 alcid=16 shikigva=80 OpenCore recommends USBMap.kext. This USBMap.kext is configured for Aorus Master USBMap.kext.zip (iMac19,1) Edited July 10, 2020 by Blu24 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted July 10, 2020 Share Posted July 10, 2020 57 minutes ago, Blu24 said: sorry, This boot-args should work with your Gigabyte Z390 Aorus Master keepsyms=1 debug=0x100 alcid=16 shikigva=80 OpenCore recommends USBMap.kext. This USBMap.kext is configured for Aorus Master USBMap.kext.zip (iMac19,1) Always same issue: Second stage, macOS Big Sur stuck at less than one minute (with Apple logo and progress bar). It's incredible ! TODO: Redownload macOS Big Sur Beta Full installer recreate USB Installer createinstallmedia method Do you know the right way for createinstallmedia Big Sur Beta 2, maybe I make a mistake ! Link to comment Share on other sites More sharing options...
Taruga Posted July 10, 2020 Share Posted July 10, 2020 I don't know why, but I can only boot to desktop with booter-fileset-kernel booter-fileset-basesystem nvram settings. If I try to boot using kernel collections, It boots to a black screen and a mouse pointer. I see nothing else. Link to comment Share on other sites More sharing options...
Stefanalmare Posted July 10, 2020 Share Posted July 10, 2020 20 minutes ago, Taruga said: I don't know why, but I can only boot to desktop with booter-fileset-kernel booter-fileset-basesystem nvram settings. If I try to boot using kernel collections, It boots to a black screen and a mouse pointer. I see nothing else. Disable AirportBrcmFixup.kext. But you'll have no wifi. Link to comment Share on other sites More sharing options...
Blu24 Posted July 10, 2020 Share Posted July 10, 2020 35 minutes ago, Matgen84 said: Always same issue: Second stage, macOS Big Sur stuck at less than one minute (with Apple logo and progress bar). It's incredible ! TODO: Redownload macOS Big Sur Beta Full installer recreate USB Installer createinstallmedia method Do you know the right way for createinstallmedia Big Sur Beta 2, maybe I make a mistake ! I'm going to compile the latest EFI for you. I'll be back in about 40 minutes Link to comment Share on other sites More sharing options...
mnfesq Posted July 10, 2020 Share Posted July 10, 2020 7 hours ago, pg7 said: test with this EFI and say if you already have the HDD all in the OC menu! mnfesq OC HP.zip Thanks but it did not work. I kept getting a KP due to VoodooInput.kext. I tried adjusting the settings but could not get the EFI to boot even though it is mostly identical to mine. Link to comment Share on other sites More sharing options...
eSaF Posted July 10, 2020 Share Posted July 10, 2020 2 hours ago, eSaF said: No I celebrated too soon because after a couple of reboots it's back. I will investigate further. Ok - I don't know what fixed the recurring files in the Bin after every boot up but I rolled back to an earlier EFI Folder with a clean install and it seems to be fixed, so fingers crossed I am hoping the problem is solved but will keep an eye on it over time. Link to comment Share on other sites More sharing options...
MorenoAv Posted July 10, 2020 Share Posted July 10, 2020 My only problem is the HEVC or better said the lack of HEVC, anyone knows how do I fix it? Without HEVC I have no Netflix in safari, edge or firefox... Thanks Link to comment Share on other sites More sharing options...
mnfesq Posted July 10, 2020 Share Posted July 10, 2020 3 hours ago, chris1111 said: It is with great pride that I announce the boot on the HP ProBook 6570B With the latest OpenCore Boottloader I just say thanks to the DEVS and all friends Users I am jealous that your HP can see your internal drives while mine cannot. Could you please post your DSDT for your HP ProBook (and any SATA SSDT) so that I can compare the code with mine and see if mine is missing something. Thanks. Link to comment Share on other sites More sharing options...
dariuxzy Posted July 10, 2020 Share Posted July 10, 2020 (edited) 21 minutes ago, mnfesq said: Thanks but it did not work. I kept getting a KP due to VoodooInput.kext. I tried adjusting the settings but could not get the EFI to boot even though it is mostly identical to mine. I had your same problem. You must use the latest VoodooPS2 by acidanthera (which also contains VoodooInput), and you will no longer have any KP Edited July 10, 2020 by dariuxzy Link to comment Share on other sites More sharing options...
chris1111 Posted July 10, 2020 Share Posted July 10, 2020 (edited) 38 minutes ago, mnfesq said: I am jealous that your HP can see your internal drives while mine cannot. Could you please post your DSDT for your HP ProBook (and any SATA SSDT) so that I can compare the code with mine and see if mine is missing something. Thanks. Let my finish I will gives you All .AML file EDIT File attach DSDT:SSDT.zip origin.zip Edited July 10, 2020 by chris1111 Link to comment Share on other sites More sharing options...
mnfesq Posted July 10, 2020 Share Posted July 10, 2020 5 minutes ago, dariuxzy said: I had your same problem. You must use the latest VoodooPS2 by acidanthera (which also contains VoodooInput), and you will no longer have any KP Thanks, but I was using version 2.16. Link to comment Share on other sites More sharing options...
Stefanalmare Posted July 10, 2020 Share Posted July 10, 2020 23 minutes ago, mnfesq said: I am jealous that your HP can see your internal drives while mine cannot. Could you please post your DSDT for your HP ProBook (and any SATA SSDT) so that I can compare the code with mine and see if mine is missing something. Thanks. You don't see internal drives or Mac partitions? I have HP ProBook 4540s and I can't saw the Mac partitions at the time. If so, look at my earlier post and maybe will fix your problem. Link to comment Share on other sites More sharing options...
ameenjuz Posted July 10, 2020 Share Posted July 10, 2020 14 hours ago, mnfesq said: Here's a working EFI folder. I have tried several and all of them boot to the installer but none of them allow me to see my internal drives. mnfesq EFI.zip i attached my EFI folder for you EFI.zip Link to comment Share on other sites More sharing options...
dariuxzy Posted July 10, 2020 Share Posted July 10, 2020 13 minutes ago, mnfesq said: Thanks, but I was using version 2.16. That you have is not by acidanthera. https://github.com/acidanthera/VoodooPS2/releases Download the version 2.1.5 Link to comment Share on other sites More sharing options...
DarkNeptune0 Posted July 10, 2020 Share Posted July 10, 2020 15 hours ago, htanh034 said: error same for me With the following kext compiled by a user named hitman20 from the Github the-darkvoid repository the trackpad with voodooi2c and voodooi2CELAN has no lag ACPIBatteryManager.kext (1).zip 1 Link to comment Share on other sites More sharing options...
mnfesq Posted July 10, 2020 Share Posted July 10, 2020 22 minutes ago, Stefanalmare said: You don't see internal drives or Mac partitions? I have HP ProBook 4540s and I can't saw the Mac partitions at the time. If so, look at my earlier post and maybe will fix your problem. I tried your fix but it didn't work for me. Thanks for responding. 1 Link to comment Share on other sites More sharing options...
Blu24 Posted July 10, 2020 Share Posted July 10, 2020 (edited) 12 hours ago, Matgen84 said: Always same issue: Second stage, macOS Big Sur stuck at less than one minute (with Apple logo and progress bar). It's incredible ! TODO: Redownload macOS Big Sur Beta Full installer recreate USB Installer createinstallmedia method Do you know the right way for createinstallmedia Big Sur Beta 2, maybe I make a mistake ! Hi Matgen84, I've compiled an EFI for your Gigabyte Z390 AORUS Master motherboard. I'm 95% sure it will work Boot into your USB then select OpenCore You only need to change MLB SystemSerialNumber SystemUUID EFI.zip Edited July 11, 2020 by Blu24 1 Link to comment Share on other sites More sharing options...
hohoho Posted July 10, 2020 Share Posted July 10, 2020 5 hours ago, greythorne said: Please refer to my post few pages back. Had the exact same issues. Realized that the Lilu.kext is the issue. Compiled the latest Debug and problem was solved! No idea why when i compiled the latest release version got the same error. Using the latest debug verson of lilu worked for me too. The Big Sur vanilla USB installer now boots successfully (will just be starting to install Big Sur now so i don' know yet if the install will be successful and if it will still work after install). Thanks a lot! Link to comment Share on other sites More sharing options...
mnfesq Posted July 10, 2020 Share Posted July 10, 2020 By now, everyone here must know that I am not able to connect to my internal drives (hdd, ssd, DVD/ATAPI) when I boot to BS installer or BS Beta 2 installed on an external USB drive. Here is what I see when I boot up. Immediately after what is in the photo, my laptop goes to the apple symbol and progress bar that indicates that graphics drivers have loaded. It then boots up but only detects external USB drives. I have tried every possible OC configuration and have used my native DSDT with no patches and still the problem persists. Ideas would be appreciated. Spoiler Link to comment Share on other sites More sharing options...
chris1111 Posted July 10, 2020 Share Posted July 10, 2020 2 minutes ago, mnfesq said: By now, everyone here must know that I am not able to connect to my internal drives (hdd, ssd, DVD/ATAPI) when I boot to BS installer or BS Beta 2 installed on an external USB drive. Here is what I see when I boot up. Immediately after what is in the photo, my laptop goes to the apple symbol and progress bar that indicates that graphics drivers have loaded. It then boots up but only detects external USB drives. I have tried every possible OC configuration and have used my native DSDT with no patches and still the problem persists. Ideas would be appreciated. Reveal hidden contents I give's you the aml files Link to comment Share on other sites More sharing options...
Blu24 Posted July 10, 2020 Share Posted July 10, 2020 6 minutes ago, hohoho said: Using the latest debug verson of lilu worked for me too. The Big Sur vanilla USB installer now boots successfully (will just be starting to install Big Sur now so i don' know yet if the install will be successful and if it will still work after install). Thanks a lot! Good Luck 1 Link to comment Share on other sites More sharing options...
MacPato Posted July 10, 2020 Share Posted July 10, 2020 On 7/9/2020 at 8:58 PM, jlcdgd said: This is the error I am having while booting Gigabyte Designare x99 Intel(R) Xeon(R) CPU E5-2670 v3 @ 2.30GHz Any help? Thanks in advance I have same issue with a Asus X99-s I assumed it may of been a MSR Lock issue, I had XLNC make a new patched BIOS and still doesn't work, I think X99's may be a lost cause at this stage with the beta. Link to comment Share on other sites More sharing options...
Recommended Posts