dannyboy9 Posted July 6, 2020 Share Posted July 6, 2020 2 hours ago, Club1 said: I have this in my config Hide contents don't need to have opencanopy.efi 4 minutes ago, eSaF said: @dannyboy9 - Hey thanks, as a matter of fact I did look at your EFI Folder and noticed as well as the config.plist you used, the Full Sample, the version is not 0.6.0, I don't know how much of a difference that makes but I shall battle on. well if it works for a nearly 95% spec'd system as yours, it ought to work for you too 1 Link to comment Share on other sites More sharing options...
eSaF Posted July 6, 2020 Share Posted July 6, 2020 @dannyboy9 - Yea you have a very valid point there, I will forge on with ver 0.6.0, if I fall down I will give your folder a run and report back. 1 Link to comment Share on other sites More sharing options...
Club1 Posted July 6, 2020 Share Posted July 6, 2020 @dannyboy9 Still the same. Looks like I will need to wait Link to comment Share on other sites More sharing options...
bbmatias3 Posted July 6, 2020 Share Posted July 6, 2020 8 hours ago, augustopaulo said: Hi @bbmatias3, That's really nice - Thanks! I just added the "-v" (verbose) to boot arguments and unfortunately it stops booting as per picture... The BigSur image was "DD" copied from a VM installed image from Olarila, which boots on my Z390 Desktop with different EFI/OC. Spoiler my bros laptop is a dell e5570, i used the same efi but made a few changes. i also used the Olarila method. make sure to disable legacy rom options in bios. i tested this efi with big sur and its working https://drive.google.com/file/d/1m9na1S3bWxulcyLOkm47T179killBakV/view?usp=sharing Link to comment Share on other sites More sharing options...
bad_colne Posted July 6, 2020 Share Posted July 6, 2020 Hello there, i succeded to install BigSur on an Asus Rog G771JW with everything working. If someone could help me with some things: 1. When i try to restart my laptop the OS turns off, my screen turns off but my laptop stays on that statement and doesnt reboot so i have to force it to turn off. 2. When im trying to put it on sleep, it goes to sleep mode and after 10 second my laptop turns back on 3. how to remove "OCS: No scheme for BlacklistAppleUpdate at 3 index, context <Security>" from OpenCore boot? Thank you, Cornel EFI.zip Link to comment Share on other sites More sharing options...
dannyboy9 Posted July 6, 2020 Share Posted July 6, 2020 (edited) 23 minutes ago, eSaF said: @dannyboy9 - Yea you have a very valid point there, I will forge on with ver 0.6.0, if I fall down I will give your folder a run and report back. i was in no mood of making a plist for 0.6, but here it is for your satisfaction. config.plist Edited July 6, 2020 by dannyboy9 1 Link to comment Share on other sites More sharing options...
tore2003 Posted July 6, 2020 Share Posted July 6, 2020 7 hours ago, Cyberdevs said: Yeah my Haswell refuses to boot, it ends up with KP regardless. Mine is a Sandy Bridge, same thing. Link to comment Share on other sites More sharing options...
Taruga Posted July 6, 2020 Share Posted July 6, 2020 16 minutes ago, bad_colne said: .how to remove "OCS: No scheme for BlacklistAppleUpdate at 3 index, context <Security>" from OpenCore boot? OpenCore Changelog ================== #### v0.6.0 - Fixed sound corruption with AudioDxe - Fixed icon choice for Apple FW update in OpenCanopy - Fixed APFS driver loading on Fusion Drive - Added Comet Lake HDA device code - Fixed audio stream position reporting on non-Intel platforms - Added `Firmware` mode to `ResetSystem` to reboot into preferences - Replaced `BlacklistAppleUpdate` with `run-efi-updater` NVRAM variable - Fixed reset value in `FadtEnableReset` ACPI quirk - Fixed freezes during boot option expansion with PXE boot entries - Updated underlying EDK II package to edk2-stable202005 - Added `ProvideMaxSlide` quirk to improve laptop stability, thx @zhen-zen - Fixed slide choice on platforms when 0 slide is unavailable, thx @zhen-zen - Fixed assertions caused by unaligned file path access in DEBUG builds - Renamed `ConfigValidity` utility to `ocvalidate` for consistency - Added `GlobalConnect` for APFS loading to workaround older firmware issues Just replace `BlacklistAppleUpdate` with `run-efi-updater` NVRAM variable 4 1 Link to comment Share on other sites More sharing options...
Cyberdevs Posted July 6, 2020 Share Posted July 6, 2020 Installation went successfully on my Haswell rig with GigaByte GA-H97-D3H. Here is my EFI (without SMBIOS info) if you are interested. Spoiler Haswell OC 0.6.0 Big Sur USB Installer.zip 16 minutes ago, tore2003 said: Mine is a Sandy Bridge, same thing. I've built the latest Lilu+WEG and it solved the KP. Check my EFI folder it might help you to boot into macOS Big Sur. 3 2 Link to comment Share on other sites More sharing options...
black.dragon74 Posted July 6, 2020 Share Posted July 6, 2020 @lottenow try to boot only with Lilu, WhateverGreen and VirtualSMC. It will work then. 1 Link to comment Share on other sites More sharing options...
dannyboy9 Posted July 6, 2020 Share Posted July 6, 2020 Funny enough, my efi which I made for my system, gives me a SIGABRT error on the USB. How can I fix this Link to comment Share on other sites More sharing options...
black.dragon74 Posted July 6, 2020 Share Posted July 6, 2020 1 minute ago, dannyboy9 said: Funny enough, my efi which I made for my system, gives me a SIGABRT error on the USB. How can I fix this Reset NVRAM or try using FakeSMC instead of VirtualSMC. Link to comment Share on other sites More sharing options...
manmo71 Posted July 6, 2020 Share Posted July 6, 2020 2 minutes ago, black.dragon74 said: Reset NVRAM or try using FakeSMC instead of VirtualSMC. @black.dragon74 How can I RESET NVRAM? I used to have that option during boot earlier, I dont know what I changed in the process of trying to resolve this boot from USB. Now I dont get the NVRAM Reset option at OC boot anymore. How can I fix that? Link to comment Share on other sites More sharing options...
dannyboy9 Posted July 6, 2020 Share Posted July 6, 2020 12 minutes ago, black.dragon74 said: Reset NVRAM or try using FakeSMC instead of VirtualSMC. nvram reset is always set to true, fakesmc didn't work Link to comment Share on other sites More sharing options...
Cyberdevs Posted July 6, 2020 Share Posted July 6, 2020 @manmo71 Make sure HideAuxiliary is set to NO in the config.plist so you get the NVRAM Reset Option in OC's picker. Spoiler Link to comment Share on other sites More sharing options...
manmo71 Posted July 6, 2020 Share Posted July 6, 2020 4 minutes ago, dannyboy9 said: nvram reset is always set to true, fakesmc didn't work My config.plist has AllowNVRAMReset=YES but still no luck, I tried FAKESMC in place of VirtualSMC but still end up in a loop with SIGABRT. Link to comment Share on other sites More sharing options...
dannyboy9 Posted July 6, 2020 Share Posted July 6, 2020 i still haven't found a solution to that SIGABRT. Can't seem to understand what is causing it Link to comment Share on other sites More sharing options...
bad_colne Posted July 6, 2020 Share Posted July 6, 2020 1 minute ago, dannyboy9 said: i still haven't found a solution to that SIGABRT. Can't seem to understand what is causing it What ver of Lillu do you use? Whats the file size? Link to comment Share on other sites More sharing options...
manmo71 Posted July 6, 2020 Share Posted July 6, 2020 Spoiler @Cyberdevs I had enabled HideAuxillary=YES, making that NO fixed the missing Reset NVRAM option. Thank you. 1 Link to comment Share on other sites More sharing options...
dannyboy9 Posted July 6, 2020 Share Posted July 6, 2020 1 minute ago, bad_colne said: What ver of Lillu do you use? Whats the file size? Lilu will never be the problem. It's 1.2MB, i've built the latest one Link to comment Share on other sites More sharing options...
bad_colne Posted July 6, 2020 Share Posted July 6, 2020 Just now, dannyboy9 said: Lilu will never be the problem. It's 1.2MB, i've built the latest one I had the same problem and for me was Lillu with the 1.2MB filesize. I used another one that i was using with Clover that has 153KB and is working now. Link to comment Share on other sites More sharing options...
Alex HQuest Posted July 6, 2020 Share Posted July 6, 2020 (edited) 6 hours ago, MacPato said: Anyone with SIGABRT errors swap for FakeSMC and reset NVRAM And where's the source or release of the latest FakeSMC code? Is it still RehabMan's one from 2018? [EDIT] Or is it Slice's FakeSMC3 from 2019? [EDIT 2] Neither works - manually resetting NVRAM and flipping from VirtualSMC to FakeSMC and FakeSMC3 still gives me SIGABRT every time. Edited July 6, 2020 by Alex HQuest Link to comment Share on other sites More sharing options...
ham4ever Posted July 6, 2020 Share Posted July 6, 2020 Just now, dannyboy9 said: i still haven't found a solution to that SIGABRT. Can't seem to understand what is causing it yes same here, i tried all but none works Link to comment Share on other sites More sharing options...
RGarrido Posted July 6, 2020 Share Posted July 6, 2020 18 hours ago, SavageAUS said: I think i'll wait for Dortania to update the guide. I cannot get the USB installer to work and i don't know what the KP means. Reveal hidden contents EFI.zip It was happening the same with me, but I rapidly realized it was the kexts. It’s something from the network or Bluetooth drivers, but I’ll try tomorrow 1 by 1 to see the problem. I’m using Intel AX200 and Realtek PCIe GB, with kexts “itlwmx” and “RTL8111”, respectively. As for the Bluetooth, I’m using “IntelBluetoothFirmware” Coffee lake here Link to comment Share on other sites More sharing options...
lottenow Posted July 6, 2020 Share Posted July 6, 2020 (edited) 1 hour ago, black.dragon74 said: @lottenow try to boot only with Lilu, WhateverGreen and VirtualSMC. It will work then. Thank you so much @black.dragon74! I can finally boot to the installer of Big Sur. I have created a partition on my M.2 SATA 1TB SSD, but none of the partitions including the SSD are showing up on either Install or Disk Utility. Do I need any extra kexts to show APFS partitions/containers? I can only see the USB stick and Disk Image I am booting from. Thanks in advance! Edited July 6, 2020 by lottenow 1 Link to comment Share on other sites More sharing options...
Recommended Posts