Jump to content

[pre-release] macOS Big Sur in VMWare

gengik84
 Share
1,188 posts in this topic

Recommended Posts

Taruga
Taruga
Posted
Posted

I believe I'm using an BCM4360, Vendor 0x14E4 Device: 0x43A0.

Booting as a MacPro6,1,  wifi and Bluetooth was working. Did not test it, but I saw my bluetooth devices and wifi networks listed.
Booting as an iMac13,2, wifi was working, but bluetooth doesn't show up on system preferences.

I do see AirPortBrcmNIC.kext loaded in Catalina

Link to comment
Share on other sites
luki1979
luki1979
Posted
Posted

@Taruga In that case patching should work, I simply observed lack of plugins in the kext. Now only AirPortBrcmNIC.kext is left do do the job. You can check in Hackintool what plugin/kext is loaded in Catalina. If AirPortBrcmNIC.kext is loaded your card should work OTB in Big Sur.

Link to comment
Share on other sites
Manas Malla
Manas Malla
Posted
Posted (edited)

Hey everyone, I just got hands on the latest OpenCore(0.6.0) which I built from https://github.com/acidanthera/OpenCorePkg and I am able to boot macOS Catalina 10.15.5 easily. But when I boot macOS Big Sur USB, it automatically restarts and gives this error in the log.

 

00:000 00:000 OCAK: Failed to locate _xcpm_core_scope_msrs - Not Found
00:051 00:051 OCAK: Failed to locate _xcpm_pkg_scope_msrs - Not Found
00:097 00:046 OCAK: Failed to locate _xcpm_SMT_scope_msrs - Not Found
00:225 00:128 OCAK: Failed to locate printKextPanicLists (FFFFFFFFFFFFFFFF) - Not Found
00:277 00:051 OCAK: Failed to locate _cpuid_set_info (FFFFFFFFFFFFFFFF) - Not Found
00:371 00:094 OC: Prelink injection Lilu.kext (Patch engine) - Invalid Parameter
00:421 00:050 OC: Prelink injection VirtualSMC.kext (SMC emulator) - Invalid Parameter
00:473 00:051 OC: Prelink injection WhateverGreen.kext (Video patches) - Invalid Parameter
00:569 00:096 OC: Prelink injection AppleALC.kext (Audio patches) - Invalid Parameter
00:621 00:051 OC: Prelink injection SMCProcessor.kext () - Invalid Parameter
00:673 00:052 OC: Prelink injection USBInjectAll.kext (USB ports injector) - Invalid Parameter
00:724 00:051 OC: Prelink injection RealtekRTL8111.kext (Realtek Ethernet LAN) - Invalid Parameter
00:776 00:051 OC: Prelink injection AirportBrcmFixup.kext (Broadcom WiFi fix up) - Invalid Parameter
00:833 00:057 OC: Prelink injection BT4LEContinuityFixup.kext (Bluetooth fix up) - Invalid Parameter
 

Please help me in fixing this ASAP. Want to try Big Sur desperately.

EFI.zip

Edited by Manas Malla
Link to comment
Share on other sites
Manas Malla
Manas Malla
Posted
Posted
1 hour ago, Manas Malla said:

Hey everyone, I just got hands on the latest OpenCore(0.6.0) which I built from https://github.com/acidanthera/OpenCorePkg and I am able to boot macOS Catalina 10.15.5 easily. But when I boot macOS Big Sur USB, it automatically restarts and gives this error in the log.

 

00:000 00:000 OCAK: Failed to locate _xcpm_core_scope_msrs - Not Found
00:051 00:051 OCAK: Failed to locate _xcpm_pkg_scope_msrs - Not Found
00:097 00:046 OCAK: Failed to locate _xcpm_SMT_scope_msrs - Not Found
00:225 00:128 OCAK: Failed to locate printKextPanicLists (FFFFFFFFFFFFFFFF) - Not Found
00:277 00:051 OCAK: Failed to locate _cpuid_set_info (FFFFFFFFFFFFFFFF) - Not Found
00:371 00:094 OC: Prelink injection Lilu.kext (Patch engine) - Invalid Parameter
00:421 00:050 OC: Prelink injection VirtualSMC.kext (SMC emulator) - Invalid Parameter
00:473 00:051 OC: Prelink injection WhateverGreen.kext (Video patches) - Invalid Parameter
00:569 00:096 OC: Prelink injection AppleALC.kext (Audio patches) - Invalid Parameter
00:621 00:051 OC: Prelink injection SMCProcessor.kext () - Invalid Parameter
00:673 00:052 OC: Prelink injection USBInjectAll.kext (USB ports injector) - Invalid Parameter
00:724 00:051 OC: Prelink injection RealtekRTL8111.kext (Realtek Ethernet LAN) - Invalid Parameter
00:776 00:051 OC: Prelink injection AirportBrcmFixup.kext (Broadcom WiFi fix up) - Invalid Parameter
00:833 00:057 OC: Prelink injection BT4LEContinuityFixup.kext (Bluetooth fix up) - Invalid Parameter
 

Please help me in fixing this ASAP. Want to try Big Sur desperately.

EFI.zip

Anyone.... some help on this!! ASAP

EFI.zip

Link to comment
Share on other sites
jsl2000
jsl2000
Posted
Posted (edited)

Good news:

OpenCore 0.6.0 with new AMD vanilla patches can boot Big Sur in my FX-6300 hackintosh now !

[Edit]

Major bugs:

1. Screen background still shows Catalina instead of Big Sur.

2. Loss of audio output in Firefox, and poor video playl in Safari & Google Chrome.

3. In Ryzen 1700X hackintosh normal audio and video play in Safari & Google Chrome, but still loss of audio output in Firefox.

4. Previous fix of CMOS reset in Catalina was broken in Big Sur again. Always got CMOS reset during reboot after wake-up from sleep.

15h_16h-jslai-OC.plist

 

 

Screen Shot 2020-06-29 at 7.47.53 PM.png

FX-6300-Big-Sur.txt

Screen Shot 2020-06-29 at 7.35.29 PM.png

Edited by jsl2000
duplicate
  • Like 1
  • Thanks 1
Link to comment
Share on other sites
Taruga
Taruga
Posted
Posted (edited)

I'm using an BCM4360, Vendor 0x14E4 Device: 0x43A0.

Bluetooth and wifi working now as an iMac13,2. 
I had to disable USBInjectAll.kext which I did not had enabled when I tested as an MacPro6,1. Stupid mistake.

Screenshot 2020-06-29 at 11.51.12.png

 

Screenshot 2020-06-29 at 11.50.45.png

Screenshot 2020-06-29 at 11.50.53.png

Edited by Taruga
  • Like 4
  • Thanks 1
Link to comment
Share on other sites
Alex HQuest
Alex HQuest
Posted
Posted
1 hour ago, jsl2000 said:

Two major bugs:

1. Screen background still shows Catalina instead of Big Sur.

If you upgraded from Catalina to Big Sur, this is a known issue by Apple:

Desktop Picture

Known Issues

  • If the desktop picture was never changed from the default macOS Catalina 10.15 image, it will persist after updating to macOS Big Sur 11 beta, even though the new default desktop picture is displayed in Desktop and Screen Saver preferences. (64390185)

  • Like 1
Link to comment
Share on other sites
supermike
supermike
Posted
Posted
4 hours ago, luki1979 said:

As for WiFi Apple did a brutal thing and removed 3 plugins from IO80211Family.kext that is BCM4360.kext, BCM4331.kext and Atheros one too. AirportBRCMFixup was simply a pointer/patcher kext and its not going to work as there isn’t support inside the BigSur for those cards at all. Maybe they do some workaround in new version. Update Lilu and AirportBrcmFixup and try. But I fear that the only solution is to inject or replace IO80211Family.kext from Catalina.

Thanks! I'm going to try that now and see how it goes :) I'll let you know!

  • Like 1
  • Thanks 1
Link to comment
Share on other sites
karacho
karacho
Posted
Posted
On 6/27/2020 at 3:42 PM, Beppe03 said:

Finally it works!I installed it on VMware on my physical hard disk and booted up natively!

My hardware: i5 6600k, Z170-p, RX 580 8gb XFX

EFI.zip

I already did that last Thursday

Startpoint -> https://www.hackintosh-forum.de/forum/thread/49155-sammelthread-macos-bigsur-11-0-dev-beta-erfahrungen/?postID=616871#post616871

Link to comment
Share on other sites
Dragster27
Dragster27
Posted
Posted (edited)
11 hours ago, Donw35 said:

Big Sur on HP 800 G1 mini

 

Installed  Big Sur from a real Mac (Mac mini) using a USB SSD, mounted the EFI partition and copied my EFI folder. (after many hours of trial and error), install the SSD into my HP 800 G1 mini and the system boots into the desktop, finished user settings. Sleep is working but fans seem to be running fast. all in all seems to be good. I using VooDooHDA for sound. 

 

Thanks to all with the great posts that helped figure out, this is not ready for prime time but its cool to play with...

 

 

 

 

Awesome, @Donw35 would you mind sharing your EFI folder?

 

Thanks!

Edited by Dragster27
Link to comment
Share on other sites
sarthak_aditya
sarthak_aditya
Posted
Posted
On 6/28/2020 at 11:47 PM, wern apfel said:

After playing around, I can mount the drive without an error and delete kexts. I am not sure what helped, but will repeat any changes I made and let you know what helps.

Any idea now ? I can't mount the volume as read-write

Link to comment
Share on other sites
Cyberdevs
Cyberdevs
Posted
Posted

Guys:

 

Would you please stop quoting each other with the pictures attached? Please remove the pictures when you wanna quote someone.

 

you can also mention the person you are quoting by using @ and the member's name and then they will be notified that someone is talking to them.

 

Thanks.

  • Like 6
Link to comment
Share on other sites
Dragster27
Dragster27
Posted
Posted (edited)
8 minutes ago, aryaone said:

Finally, MacOS Big Sur on Dell XPS 9350
OC 0.6.0

Thanks @MaLd0n for tutorial on olarila.com and pre compiled main kexts (lilu, WEG, applealc, virtualsmc)

 

Nice! @aryaone Can you share your EFI folder please?

 

Thanks!

Edited by Dragster27
Link to comment
Share on other sites
karacho
karacho
Posted
Posted (edited)

@misako.tachikawa Sure. I just removed the Serial from PlatformInfo in config.plist

 

There you find a more detailed explanation from griven. -> https://www.hackintosh-forum.de/forum/thread/49155-sammelthread-macos-bigsur-11-0-dev-beta-erfahrungen/?postID=617936#post617936

 

Edit: Ups, i'm just be aware you don't mean me. Sorry !!!

 

EFI.zip

Edited by karacho
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
Posted
27 minutes ago, aryaone said:

Finally, MacOS Big Sur on Dell XPS 9350
OC 0.6.0

Thanks @MaLd0n for tutorial on olarila.com and pre compiled main kexts (lilu, WEG, applealc, virtualsmc)

Enjoy, Arya!

  • Like 1
Link to comment
Share on other sites
cryosat7
cryosat7
Posted
Posted
18 hours ago, hellojuliomoreira said:

Hi everyone,

 

Finally got a "vanilla" macOS Big Sur running here, no VM, no real Mac install, no pre-build image.

 

I'll try my best to describe the processes:

 

Build:

 

i5 7500

Gigabyte B250M-D3H

 

Prep:

 

I was running the latest Catalina version.

Enrolled to beta channel.

Downloaded the 10.16 update.

First time it got corrupted and the download finished 80% of the way.

Downloaded it again.

I tried the createinstallmedia method on a 8GB thumb drive but it would not finish due to the size of the installation being ~10GB.

So I created a 16GB partition on a spare SSD that I have with High Sierra and ran the createinstallmedia on it.

I was a long time Clover user, so I had to port my setup to OpenCore.

I thoroughly followed the dortania OpenCore Desktop guide https://dortania.github.io/OpenCore-Desktop-Guide/ for my CPU family I didn't use anything from my previous Clover setup except for the SMBIOS information which I ended up generating a new one in later attemps.

 

This is my current EFI:

i5-7500-b250m-d3h-EFI.zip

 

Installation:

I tried the Install macOS Beta first, it would always give me a black screen but I could see it was doing something either by hearing fan noise or the LED indicator, eventually I would reboot whenever it stop doing whatever it was doing just to find out I didn't Install anything, then I moved on to the install media method.

 

The install media would lead to a black screen but I found out that if I change sources on my monitor back and forth it would display something eventually in some stages in others it would be just black but I went on whenever I saw activity hoping it was doing something, and it was.

 

I booted into High Sierra dozen of times between stages until I saw it was not going any further and most of the time it would lead to a pink screen with the Apple logo and a stationary progress bar.

 

So I did the prelinked kernel on Preboot volume method which you guys (can't remember who, thank you anyway) brought to us from MacRumors on another post and I was pretty sure this was the last attempt.

 

Tried to boot again. Nothing.

 

Then I came to the forum and downloaded the EFI posted by @Bios-PC here. (much thanks)

 

I copied most of the quirks and kexts but kept the specifics of my system.

 

And......

 

It booted!

 

The screen would go black and I had to use the switch sources method but eventually it went ahead and finished installing the system.

 

 

 

I hope you guys find this post useful.

I'm sorry for not being able to pinpoint exactly what was needed to make it work, hopefully the OpenCore\Clover devs can workaround this soon.

 

Some photos from installation:

 

 

Mind me asking you you got to boot into the installer?, we got similar specs but when i use my current EFI to boot Big Sur, for the installation, it keeps telling me it's creating to many dead corpses.

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...