dinokpir Posted December 29, 2006 Share Posted December 29, 2006 Everyone - thank you for your good work. I have a dell latitude d600 with radeon 9000, if anyone need info from the 9000 mobility card just ask me. I am not sure what i can do to help this process. Again thank you very much. Link to comment Share on other sites More sharing options...
graphic Design Posted January 7, 2007 Share Posted January 7, 2007 And how about X850 XTPE (AGP)? Prasys, I hope your script can make any changes for that card!!! Thanks! Link to comment Share on other sites More sharing options...
hokage-dono Posted January 11, 2007 Share Posted January 11, 2007 does it works on ati mobility 9700 ? If so, do I have to delete my existing Callisto drivers before I try ? Link to comment Share on other sites More sharing options...
hokage-dono Posted January 12, 2007 Share Posted January 12, 2007 tried ... doesn't work ... what's wrong with this fu***** graphic card !!!!!! {censored} ... osx isn't osx without 3D acceleration ... Link to comment Share on other sites More sharing options...
MikeBee Posted January 19, 2007 Share Posted January 19, 2007 hmmm just a quick bump for this thread. a driver for mobility 9000 would be ace Link to comment Share on other sites More sharing options...
swosh Posted January 23, 2007 Share Posted January 23, 2007 could not get my mobility 9700 accelerated either. Link to comment Share on other sites More sharing options...
siddharth Posted January 24, 2007 Share Posted January 24, 2007 Could something be done about the ATI Radeon xPress 200 Series? Link to comment Share on other sites More sharing options...
captainsquash Posted January 25, 2007 Share Posted January 25, 2007 siddharth - Unfortunately the x200 is ridiculously far away from any supported graphics card, I've tried in vain to get QE/CI working on a friend's X200. You may want to try Katana installer to get OpenGL acceleration working, at this point in time I think it's as close as you're going to get. You can get Katana here --> http://forum.insanelymac.com/index.php?sho...=35345&st=0 Link to comment Share on other sites More sharing options...
siddharth Posted January 25, 2007 Share Posted January 25, 2007 But this page: http://www.intel.com/products/motherboard/D101GGC/index.htm says that the Video - Integrated ATI* Radeon* X300 based graphics Link to comment Share on other sites More sharing options...
captainsquash Posted January 25, 2007 Share Posted January 25, 2007 That doesn't really matter unfortunately :/. It's not that the hardware is incapable of displaying the graphics (or that it is used by motherboards made by intel), it's just that OS X just doesn't fully support that card. It doesn't have any computers (or vendors offering a x200/x300 card) which use a comparable card so there's no reason to add x200/x300 functionality. OS X uses VESA (a low-level failsafe method to send understandable data to your graphics card (in essence)) if it can't find a compatible graphics card - which is what you're likely using now. For this reason, you may want to try using Katana to see if it will get you somewhere. Link to comment Share on other sites More sharing options...
RaduKing Posted January 27, 2007 Share Posted January 27, 2007 any news on Mobility Radeon 9000/9200 ? Link to comment Share on other sites More sharing options...
bwhsh8r Posted January 27, 2007 Share Posted January 27, 2007 thank you Link to comment Share on other sites More sharing options...
oktar Posted January 28, 2007 Share Posted January 28, 2007 I took a look at the ATIRadeon8500.kext from Darwin 8.0.1 x86. This kext is Intel only. Not Universal or PPC. These are the matching id's i found in the info.plist: 0x514C1002 CHIP_R200 "ATI Radeon QL R200 8500 LE" 0x516C1002 Chip Number: R200 Chip Description: Radeon 8500 / 8500LE 0x4C661002 CHIP_R250|CHIP_IS_MOBILITY "ATI Radeon Lf R250 Mobility 9000 M9" 0x49661002 CHIP_R250 "ATI Radeon If R250 9000" 0x59601002 CHIP_RV280 "ATI Radeon RV280 9200" 0x59611002 CHIP_RV280 "ATI Radeon RV280 9200 SE" 0x5C631002 CHIP_RV280|CHIP_IS_MOBILITY "ATI Radeon RV280 Mobility"(Mobility Radeon 9200) 0x49671002 CHIP_R250 "ATI Radeon Ig R250 9000" 0x59621002 CHIP_RV280 "ATI Radeon RV280 9200" 0x59631002 CHIP_RV280 "ATI Radeon RV280 9200" I added the corresponding names for the cards. Link to comment Share on other sites More sharing options...
nunex Posted January 29, 2007 Share Posted January 29, 2007 any luck with a 9700 pro ? Link to comment Share on other sites More sharing options...
FreakyMac Posted February 11, 2007 Share Posted February 11, 2007 Anybody find a solution for Mobility 9000? Link to comment Share on other sites More sharing options...
Prasys Posted February 13, 2007 Author Share Posted February 13, 2007 9700 pro - should work x700 -should work 8500 series - Only Software OpenGL acceleration ! Link to comment Share on other sites More sharing options...
DC2BAR Posted February 14, 2007 Share Posted February 14, 2007 (edited) when installed, rebooted, no change in QE/CI on Radeon X600SE (PCIE) 0x5462. Callisto 6 installed for resolution adjustment. 10.4.8/8.8.1 install. Edited February 14, 2007 by DC2BAR Link to comment Share on other sites More sharing options...
vonker Posted February 16, 2007 Share Posted February 16, 2007 @ prasys i've downloading u'r patch, but nothing change anything my gpu pcie atiradeon x550 CI&QC not supported on core2duo x6400 gigabyte ds4 Link to comment Share on other sites More sharing options...
hryamzik Posted February 16, 2007 Share Posted February 16, 2007 (edited) I tried with x700pro here's the result: Type: Display Bus: PCIe VRAM (Total): 128 MB Vendor: ATI (0x1002) Device ID: 0x5e4b Revision ID: 0x0000 Kernel Extension Info: No Kext Loaded Displays: Display: Resolution: 1024 x 768 Depth: 32-bit Color Core Image: Not Supported Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Does the installer use some kexts from extention folder? I've removed some. I tried clysto patch also - it works, but there are problems with mouse artifacts and there's no complete solution. Edited February 16, 2007 by hryamzik Link to comment Share on other sites More sharing options...
BlackCH Posted February 18, 2007 Share Posted February 18, 2007 I have a Mobility 7000 IGP here (R200 family, i guess). I was using Katana (callisto+AGPGart), but they load the CPU too much, without any significant performance improvement. So Im back to the VESA drivers. I'll been researching about flashing the card rom, since there's a mac version of the 7000, but it seems to work only with PCI-AGP cards. I've been trying to backup the rom before trying anything else, and rom dumpers (Flashrom, ATITool, Graphiccelerator, etc) doesnt seems to work with IGP cards.... Not to tell that flashing the rom succesfuly would render the card unusable in windows. here there is a link in case someone wants to wonder about it..... http://www.cubeowner.com/forums//index.php?showtopic=8798 A driver for the R200 family would be great! Link to comment Share on other sites More sharing options...
vineEater Posted March 3, 2007 Share Posted March 3, 2007 Hi Can you tell me if this should/might work for the Radeon 9600? Also, what exactly does this do... I'm fairly new to Mac OS X and I'm just getting my head round kexts and stuff... as far as I know I'm currently using the stuff in ATIRadeon9700.kext for my card, because the way I got the GUI to work was to remove all other ATI/NVidia/GeForce files from my System/Libraries/Extensions directory does this update ATIRadeon9700.kext or something? A quick overview would be great Link to comment Share on other sites More sharing options...
vineEater Posted March 8, 2007 Share Posted March 8, 2007 Anyone? Macgirl? Link to comment Share on other sites More sharing options...
bobbymac Posted March 10, 2007 Share Posted March 10, 2007 Great to have the good news. I display card is 9550, and I have been searching the driver for a long long time. You are really god-like. TQ! Link to comment Share on other sites More sharing options...
radan Posted March 20, 2007 Share Posted March 20, 2007 any luck with radeon x600? Furthermore, does this tiny installer include 1400x1050 resolution? Link to comment Share on other sites More sharing options...
robon Posted April 6, 2007 Share Posted April 6, 2007 thanks for sharing ~ love you Link to comment Share on other sites More sharing options...
Recommended Posts