Mieze Posted May 19, 2020 Author Share Posted May 19, 2020 Here is version 1.0.0d5 in which I enabled TSO. The attached archive contains prebuilt binaries for Catalina and Mojave. I verified that it loads under Mojave. In case you want to build from source with Mojave, you have to use Xcode 10.3. Good luck testing! Mieze LucyRTL8125Ethernet-V1.0.0d5.zip 2 Link to comment Share on other sites More sharing options...
kidooe Posted May 19, 2020 Share Posted May 19, 2020 hi there, Thank you so much for your work on this kext, i did test d5 version kext and its loading in macOS mojave and working fine but i want to report one thing i still have to select medium manually to make it work. if you tell me anything you want and i can upload the logs or anything. Again thanks for your Work <3 Specs: MSI MEG X570 UNIFY - motherboard - ATX - Socket AM4 - AMD X570 MSI Gaming Radeon Rx 590 AMD Ryzen 9 3900X Link to comment Share on other sites More sharing options...
Mieze Posted May 19, 2020 Author Share Posted May 19, 2020 @kidooe That's nothing to worry about and it happens sometimes if both devices don't agree on the best speed. it's a hardware issue which can be resolved easily with manual intervention. Mieze 1 Link to comment Share on other sites More sharing options...
kidooe Posted May 19, 2020 Share Posted May 19, 2020 ohh Okay again thanks its working great in macOS mojave and macOS catalina Both i tested on both, have a great day *Cheers* 1 Link to comment Share on other sites More sharing options...
zedn Posted May 20, 2020 Share Posted May 20, 2020 Hi Mieze, many many thanks for your fast intervention... it works now perfectly under Motschawe! Have a nice day, Zig Link to comment Share on other sites More sharing options...
iCanaro Posted May 20, 2020 Share Posted May 20, 2020 (edited) grazie @Mieze Edited May 20, 2020 by iCanaro 1 Link to comment Share on other sites More sharing options...
buki Posted May 20, 2020 Share Posted May 20, 2020 Very good @Mieze Link to comment Share on other sites More sharing options...
nase Posted May 25, 2020 Share Posted May 25, 2020 Thank You!!! Lucy and the Developer!!! I have MSI X570 with two RTL8125 ( One for Internet and One for my NAS on Cross) I could not get it work during install so I just used Plugable USB and followed the instruction " Manual " on Hardware --> My local internet is connected to 1Gbps when I tried manual with 2.5Gbps it did not get connected however when connecting with 1000Mbps it worked fine. thank you for building the driver. Link to comment Share on other sites More sharing options...
bugprogrammer Posted May 26, 2020 Share Posted May 26, 2020 (edited) 您好，我的主板技嘉Z490 ELITE使用您共享的驱动程序配备了RTL8125 2.5G。当前，乱码显示在本机上，无法连接到网络，并且已经过自动和手动测试。很抱歉使用的翻译工具是英语的辛勤工作。 lan.log Edited May 27, 2020 by bugprogrammer add logs Link to comment Share on other sites More sharing options...
fuzzylogic Posted May 27, 2020 Share Posted May 27, 2020 106035+0100 localhost kernel[0]: (LucyRTL8125Ethernet) EEE support enabled 111553+0100 localhost kernel[0]: (LucyRTL8125Ethernet) TCP/IPv4 segmentation offload enabled 111722+0100 localhost kernel[0]: (LucyRTL8125Ethernet) TCP/IPv6 segmentation offload enabled 111893+0100 localhost kernel[0]: (LucyRTL8125Ethernet) TCP/IPv6 checksum offload enabled. 112232+0100 localhost kernel[0]: (LucyRTL8125Ethernet) Version 1.0.0d5 using interrupt mitigate value 0x5f51. 117502+0100 localhost kernel[0]: (LucyRTL8125Ethernet) Disable PCIe ASPM 137419+0100 localhost kernel[0]: (LucyRTL8125Ethernet) RTL8125B: (Chipset 3), 70:85:c2:cd:35:ff 931342+0100 localhost kernel[0]: (LucyRTL8125Ethernet) Link down on en1 Link to comment Share on other sites More sharing options...
TS0852 Posted May 29, 2020 Share Posted May 29, 2020 Just can't get my TP-Link Gigabyte TG-3468 to work under Catalina . System Report shows no PCIe Ethernet cards in my system / This computer does not appear to have any PCI Ethernet cards installed. I've tried the latest LucyRTL8125Ethernet installing with KextWizard . sudo kextutil -v 5 LucyRTL8125Ethernet.kext Puts out ... Kext user-space log filter changed from 0xff2 to 0xff7. Kext kernel-space log filter changed from 0xff2 to 0xff7. LucyRTL8125Ethernet.kext not of type 'kext'. usage: kextutil [options] [--] [kext] ... use kextutil -help for an explanation of each option studio@STUDIOs-iMac ~ % sudo kextutil -v 5 LucyRTL8125Ethernet.kext Kext user-space log filter changed from 0xff2 to 0xff7. Kext kernel-space log filter changed from 0xff2 to 0xff7. Can't stat LucyRTL8125Ethernet.kext - No such file or directory. Please Help me out, ASAP . - TS - Link to comment Share on other sites More sharing options...
heli8er Posted June 10, 2020 Share Posted June 10, 2020 On 4/27/2020 at 2:19 PM, luckyducky8676 said: Ok I just used a usb-c hub that I had for Ethernet to install, and I got the rtl8125 to work afterwards following your instructions thank you! I also have the x570 unify, (with ethernet cable plugged into the motherboard) but I can't install macOS because the installer does not see the internet connection as you describe too. Can you clarify your solution to get it installed? Did you use a USB-C to Ethernet dongle/hub and as soon as you plug your ethernet cable in, your mac installer recognized the internet connection? I do not have a dongle/hub but if that seems to be the solution I can probably find one to try as well. thank you for your help! Link to comment Share on other sites More sharing options...
joe2347234782357 Posted June 10, 2020 Share Posted June 10, 2020 Is a RTL8125AG chip supported with this? I tried version d5 and the ethernet interface does nothing when connected to my router. Compiling logs and info atm. My mainboard is a Gigabyte Z490 Aorus Elite AC Link to comment Share on other sites More sharing options...
joe2347234782357 Posted June 10, 2020 Share Posted June 10, 2020 (edited) Ok, so here's the logs, a rather boring wireshark trace and some screenshots of ioregistryexplorer. Log starts with a fresh boot, manual configuration of 1000Base-T, Full Duplex => self-assign 169.254... IP. Then after a whie i changed to automatic configuration (no connection) Might as well be ACPI related issues, as I'm only just learning how to fix all that. So if anyone can give me a hint towards this I'll be glad as well! Oh and connecting the very same cable end to my MBP results in a perfectly fine 1000Base-T, Full DUplex, EEE connection. Other end is a router with DHCP enabled, which I never had any issues with. Thansk in advance to anyone who's looking into this - and of course to @Mieze for writing the driver in the first place! Update: Bug resolved, removed logs Edited June 15, 2020 by joe2347234782357 Link to comment Share on other sites More sharing options...
Brumbaer Posted June 12, 2020 Share Posted June 12, 2020 Please try the attached version of the kext and tell me whether it makes a difference. LucyRTL8125Ethernet.kext.zip 2 Link to comment Share on other sites More sharing options...
nycityboriqua Posted June 12, 2020 Share Posted June 12, 2020 1 hour ago, Brumbaer said: Please try the attached version of the kext and tell me whether it makes a difference. LucyRTL8125Ethernet.kext.zip I've been looking for a working RTL8125kext for my system and finally found it. Thanks Brumbaer ! Link to comment Share on other sites More sharing options...
joe2347234782357 Posted June 12, 2020 Share Posted June 12, 2020 (edited) 5 hours ago, Brumbaer said: Please try the attached version of the kext and tell me whether it makes a difference. LucyRTL8125Ethernet.kext.zip Thanks, Brumbaer! This did the trick. Setting the link speed manually is still required, though, but in reality this presents little to no issue at all. If Mieze accepts Pull Requests, this should go into the next release Edited June 12, 2020 by joe2347234782357 1 Link to comment Share on other sites More sharing options...
opa334 Posted June 12, 2020 Share Posted June 12, 2020 20 hours ago, Brumbaer said: Please try the attached version of the kext and tell me whether it makes a difference. LucyRTL8125Ethernet.kext.zip Still doesn't work for me sadly. I'm using an MSI Z490 Gaming Plus (RTL8125B) on 10.15.5. Log and screenshots are attached. @Mieze log.txt Link to comment Share on other sites More sharing options...
Brumbaer Posted June 13, 2020 Share Posted June 13, 2020 Do you have a 2500 network ? If not select the correct speed. If so, do you have an ordinary 1 Giga network for testing ? Just to make sure that it's not working. Link to comment Share on other sites More sharing options...
opa334 Posted June 13, 2020 Share Posted June 13, 2020 25 minutes ago, Brumbaer said: Do you have a 2500 network ? If not select the correct speed. If so, do you have an ordinary 1 Giga network for testing ? Just to make sure that it's not working. Oh lol, I didn't realize I need to select whatever speed my network has, I thought I'm supposed to select the speed of my network card. Setting it to 1000 does not work, but 100 does... 100 is probably the speed of my network because I use some fairly old wireless device to get the ethernet to my room. Thanks! Link to comment Share on other sites More sharing options...
Mieze Posted June 14, 2020 Author Share Posted June 14, 2020 @Brumbaer Thanks for tracking down this bug to it's origin. I'm going to rewrite chip recognition from scratch next week because Realtek's solution is not only confusing but also extremely ugly. 4 2 Link to comment Share on other sites More sharing options...
fuzzylogic Posted June 15, 2020 Share Posted June 15, 2020 I have read and write set to enable, using tool, make my disk read writeable yet, in hackintool I get the following message System/Library/Extensions/LucyRTL8125Ethernet.kext does not authenticate; omitting Kext rejected due to improper filesystem permissions: Link to comment Share on other sites More sharing options...
Mieze Posted June 15, 2020 Author Share Posted June 15, 2020 I reworked chip identification in version 1.0.0d6 to fix the issue. Attached you'll find debug and release builds for Mojave and Catalina. Mieze LucyRTL8125Ethernet-V1.0.0d6.zip 3 Link to comment Share on other sites More sharing options...
redcweed Posted June 16, 2020 Share Posted June 16, 2020 On 6/12/2020 at 4:35 AM, joe2347234782357 said: Thanks, Brumbaer! This did the trick. Setting the link speed manually is still required, though, but in reality this presents little to no issue at all. If Mieze accepts Pull Requests, this should go into the next release This worked on my MSI z490m Gaming Edge - thank you much for your contributions! Link to comment Share on other sites More sharing options...
redcweed Posted June 16, 2020 Share Posted June 16, 2020 One thing I just caught is the latest version (d6 and the one you posted right before (not d5)) cause the machine not to sleep -- when i invoke sleep, the screen goes off, but machine keeps running, eventually i hear the fans spool up as if the cpu is becoming loaded after 3-5 mins. The previous versions that did not work on this board (d5 and before did not cause sleep issues, but also did not connect to network. Im going to try using latest version and prior to sleep turning the interface off. Link to comment Share on other sites More sharing options...
Recommended Posts