vdv Posted November 21, 2022 Share Posted November 21, 2022 Hi, I understand but before installing the driver I don’t have those errors. Link to comment Share on other sites More sharing options...
BillDH2k Posted November 21, 2022 Share Posted November 21, 2022 3 hours ago, vdv said: Hi, I understand but before installing the driver I don’t have those errors. I would recommend using OCAT tool to check your config.plist (Here is good link for instruction). Those errors are typically from old formats not compatible with newer OC. Link to comment Share on other sites More sharing options...
Slice Posted November 22, 2022 Share Posted November 22, 2022 On 11/19/2022 at 11:23 PM, Slice said: Hi, I found a way to produce the protocol EFI_MP_SERVICE_PROTOCOL. Try to put this driver into the bootloader. In the case of Clover this is the folder /EFI/CLOVER/drivers/UEFI I need your tests and observations. I may propose next iteration. Test please. Link to comment Share on other sites More sharing options...
BillDH2k Posted November 23, 2022 Share Posted November 23, 2022 (edited) 20 hours ago, Slice said: I may propose next iteration. Test please. CpuMpDxe.efi.zip 8.36 kB · 1 download @Slice Tried this driver on a HP Z620 (X79, 1x 2650V2) with OC 0.8.4. OC boot up OK, no hang up, but when I tried to run ResetTSCAdjust.efi (as an EFI tool), it hanged on message "Looking up EFI_MP_SERVICES_PROTOCOL..." Edited November 23, 2022 by BillDH2k Link to comment Share on other sites More sharing options...
Slice Posted November 23, 2022 Share Posted November 23, 2022 Sorry, one bug removed CpuMpDxe.efi.zip Link to comment Share on other sites More sharing options...
BillDH2k Posted November 23, 2022 Share Posted November 23, 2022 (edited) @Slice Also went a step further to test with the VerifyMP.efi tool (from the same source as ResetTSCAdjust.efi here). It checked the current TSC values, then perform a reset, and show new TSC after the reset. See screen capture below for results. On HP Z620 with your CpuMpExe.efi loaded as EFI driver, it appeared to have passed "looking up EFI_MP_SERVICES_PROTOCOL" and then stuck on next step "MSR TSC Adjust" (could only speculate what the script was trying to do). For comparison, I also showed the screen capture when the script was working on a HP Z440 (BIOS has support for EFI_MP_SERVICES_PROTOCOL). when running VerifyMP.efi on HP Z620 (with CpuMpExe.efi loaded as driver): When running VerifyMP.efi on HP Z440 (no extra driver loaded): Edited November 23, 2022 by BillDH2k Link to comment Share on other sites More sharing options...
BillDH2k Posted November 23, 2022 Share Posted November 23, 2022 1 hour ago, Slice said: Sorry, one bug removed CpuMpDxe.efi.zip 6.89 kB · 1 download Rerun my test with this newer version. Same result. Link to comment Share on other sites More sharing options...
vdv Posted November 25, 2022 Share Posted November 25, 2022 On 11/23/2022 at 5:03 PM, Slice said: Sorry, one bug removed CpuMpDxe.efi.zip 6.89 kB · 4 downloads Thanks. Tested yesterday but no boot (black screen) - cpus=1 is also not booting I updated OC to 0.8.6 first (thanks to verdazil). I'll check it better during the weekend. Link to comment Share on other sites More sharing options...
verdazil Posted November 27, 2022 Author Share Posted November 27, 2022 @vdv, you are using the debug version OC 0.8.6? Check the config.plist settings using the ocvalidate utility. I see 43 errors! Link to comment Share on other sites More sharing options...
verdazil Posted December 2, 2022 Author Share Posted December 2, 2022 (edited) Ventura experimental installation Brief description of the installation procedure: 1. Download the Ventura installer to the Applications directory 2. Patch the installer with OCLP app 3. Make an installation flash drive as always 4. Install the system in the usual way. For the first log on to the Ventura desktop at the final stage of installation, disable SIP, set the SecureBootModel parameter to Disabled, and add the -x bootarg 5. Complete Post Install Root Patch with OCLP app, delete -x bootarg and reboot P.S. Having a second working macOS on this PC will greatly facilitate and speed up the work. Edited December 2, 2022 by verdazil 1 Link to comment Share on other sites More sharing options...
vdv Posted December 3, 2022 Share Posted December 3, 2022 On 11/27/2022 at 4:50 PM, verdazil said: @vdv, you are using the debug version OC 0.8.6? Check the config.plist settings using the ocvalidate utility. I see 43 errors! Very bad update. I tried to change CPU. Unfortunately bent 4 pins (CPU falled). Bending them back in position...2 broken. Mobo not reparable. My experience with T5610 stop here. Already sold the CPUS. Reassembled back the T5600 and sold. Thanks for the help. Now I will work on a T5810. Let see if I can handle 1 cpu Link to comment Share on other sites More sharing options...
verdazil Posted September 14, 2023 Author Share Posted September 14, 2023 (edited) Sonoma 14 beta7 experimental installation 1. Installation completed with OCLP 2. Some special settings and files (OpenCore): - Native CpuPm.aml ACPI Table is deleted, a modified CpuPmMod.aml is used instead - AppleIntelCPUPowerManagement.kext, AppleIntelCPUPowerManagementClient.kext from macOS Monterey, patched for compatibility with Sonoma and added to OpenCore - For Turbo Boost operation used 3 patches in OC config section Kernel --> Patch - To ensure synchronization of CPU cores, a modified CpuTSCSyncM.kext is used - USBPorts.kext used for correct operation of the USB ports - Custom PowerPlay Tables for AMD Polaris Card RX 570 4G - Custom memory OC settings 3. What works? - Video: 4K x 60Hz on BENQ-BL2711U + Full HD x 60Hz on LG TV 42LF650V - Sound: audio jack + HDMI audio on both monitors - USB2 && USB3 ports - LAN - CPU SpeedStep and Turbo Boost - VDA Decoder Fully Supported 4. EFI folder available: https://drive.google.com/file/d/1iWEZOT9ORBZcHv-Se_u500GEyfXDI61H/view?usp=sharing 5. Test work images Edited September 14, 2023 by verdazil 1 Link to comment Share on other sites More sharing options...
shamman Posted February 10 Share Posted February 10 Hi, friends! I don’t want to offtop here, since this thread for HUANANZHI. But I have a question on X99 too. If anybody can help, please look my topic. Will be grateful for any help. Link to comment Share on other sites More sharing options...
verdazil Posted September 17 Author Share Posted September 17 (edited) Successfully installed macOS Sequoia 15.0 EFI folders available. Updated hardware configuration MB: Huananzhi X79-ZD3 CPU: Intel® Xeon E5-2689, 1.2-3.6 GHz Chipset: Sandy Bridge-E Q65 (C600/C200) Memory: Samsung 32 Gb (4 x 8 Gb) ECC/REG, 1866 MHz, DDR3 Video: Sapphire Pulse Radeon RX 570 (4 Gb) Monitor: BENQ-BL2711U TV: LG TV 42LF650V SSD: Lexar SSD NM620, 256 Gb SSD: Samsung SSD 850 EVO, 250 Gb SSD: Kingston SA400 S37120G, 120 Gb SSD: Transcend TS120G SSD220S, 120 Gb HDD: SAMSUNG HD154UI, 1.5 Tb HDD: WDC WD20EZ13X, 2.0 Tb WiFi: TP-LINK TL-WDN4800 Qualcomm Atheros AR938x Wireless Network Adapter [168c:0030] What work? - Video: 4K x 60Hz on BENQ-BL2711U + Full HD x 60Hz on LG TV 42LF650V (OCLP v. 2.0.1) - Sound: audio jack + HDMI audio on both monitors (AppleALC for OC and VoodooHDA for Clover) - Wi-Fi TP-LINK TL-WDN4800 Qualcomm Atheros AR938x (OCLP v. 2.0.1) - USB2 && USB3 ports - LAN - Speed Step - Turboboost EFI Clover: https://drive.google.com/file/d/1Z_OEwU-FVIqe_lzCsy2nfkCMRSm0KCgZ/view?usp=sharing EFI OC: https://drive.google.com/file/d/1cQjGUFx7Z78xs-ab-KEh4ZP1QJ8EqPbG/view?usp=sharing Edited September 19 by verdazil 1 Link to comment Share on other sites More sharing options...
Recommended Posts