Customized OpenCore with additional features

[Awesome Donkey]

Already did that, but that just restores it to the old pre-label style. I'd like to keep the labels, but have the text size like it was before like in my screenshot above.

[Matgen84]

Hi all users

 

 

 

With Label.png

 

 

Without Label.png

 

Edited March 11, 2020 by Matgen84

[n.d.k]

5 hours ago, Matgen84 said:

Do you see my previous post with screenshot: Label text is a little bit too large for label.png. For  Install macOS...  or Recovery..., on my 1920*1080. Is it possible to shorten them: Recovery instead of Recovery 10.15.3...,  for example.

 

Trimming are now chopping off the whole word.

 

4 hours ago, Awesome Donkey said:

But the label text is now too large and it cuts parts of the label text off. Any way to specifically restore the above type of font style?

 

TextScaling restored to first label commit was introduced.

 

PS.  Anyone is having problem with text doesn't fit under icon, then turn off the label with "No_label.png", it will fall back to the old style.  It's hard to make fit for everyone with different resolutions, especially low resolution screen.

Edited March 11, 2020 by n.d.k

[The_Dave94]

With the latest build my background wallpaper is no longer shown. I have added my icons folder below, my screen resolution is 2560x1440

Icons.zip

Edited March 12, 2020 by The_Dave94

[Matgen84]

16 hours ago, n.d.k said:

 

Trimming are now chopping off the whole word.

 

Great again, Thanks. 

 

I know this is a detail, but there is a slight problem on the right of the screen: a shift in date, time and version as if there was a margin. 

 

 

[n.d.k]

2 hours ago, The_Dave94 said:

With the latest build my background wallpaper is no longer shown. I have added my icons folder below, my screen resolution is 2560x1440

Icons.zip

 

Have you resize the background.png to match your screen resolution?..it will now show if it doesn't match.

 

1 hour ago, Matgen84 said:

I know this is a detail, but there is a slight problem on the right of the screen: a shift in date, time and version as if there was a margin.

 

You seems to use a different font.png. Can you test it with the new default font? I just switched the default font to another font.png which seem much clearer than the previous one.

Edited March 12, 2020 by n.d.k

[Matgen84]

28 minutes ago, n.d.k said:

 

You seems to use a different font.png. Can you test it with the new default font? I just switched the default font to another font.png which seem much clearer than the previous one.

 

I test the new default font: the right margin is always there, a little bit larger I think. Yes this new one is much clearer that your first one. Maybe, the font is not at fault: I don't know.

 

I don't remember on which commit, there was no right margin like that.

 

 

Edited March 12, 2020 by Matgen84

[n.d.k]

45 minutes ago, Matgen84 said:

I test the new default font: the right margin is always there, a little bit larger I think. Yes this new one is much clearer that your first one. Maybe, the font is not at fault: I don't know.

 

I don't remember on which commit, there was no right margin like that.

 

I'll take care of that margin on next commit, just need a little adjustment.

 

And here's a little opinion survey on the new little badge on the bottom right corner,  which indicate whether it's external, internal, recovery, tool entry. I am kinda undecided at the moment, reason is a bit ill effect on the overall look.

 

 

[Matgen84]

2 minutes ago, n.d.k said:

 

I'll take care of that margin on next commit, just need a little adjustment.

 

And here's a little opinion survey on the new little badge on the bottom right corner,  which indicate whether it's external, internal, recovery, tool entry. I am kinda undecided at the moment, reason is a bit ill effect on the overall look.

 

Thanks for the little adjustment in the next commit 

 

One stupid question: you've a external icons with label named Install macOS ( only Install on my previous screen). I think Install macOS is better, you are right. I want it 

 

My little opinion on new little badge: I don't think is interesting for tools entry. They must be optional for the device, I suppose. Personally, I find that this adds to this theme. A slightly larger badge and circular icons, would be nice maybe.

 

Sorry for english.

[The_Dave94]

 

2 hours ago, n.d.k said:

Have you resize the background.png to match your screen resolution?..it will now show if it doesn't match.

I have the background.png in two sizes in the icons folder, like the sample folder, one hd and one 4k res. I don't see anything in the bootpicker window, where should I look for the message?

[n.d.k]

11 minutes ago, The_Dave94 said:

 

I have the background.png in two sizes in the icons folder, like the sample folder, one hd and one 4k res. I don't see anything in the bootpicker window, where should I look for the message?

 

Based on your screen resolution, it will use background.png, so open up background.png in Icons folder with mac preview editor, Tool->Adjust size.

[RazerXXX]

Sorry if the question might look stupid

 

How do i import opencore settings into the sample of this?

[n.d.k]

30 minutes ago, RazerXXX said:

Sorry if the question might look stupid

 

How do i import opencore settings into the sample of this?

 

It use the same one..

[Matgen84]

@n.d.k

 

Thanks a lot, with latest commit no more right margin on my 1080p screen 

[RazerXXX]

40 minutes ago, n.d.k said:

 

It use the same one..

 

This is what I had done but:

-i suppose options like EnableForAll are not working, since they are not defined in the config file

-background is plain black

[n.d.k]

1 hour ago, RazerXXX said:

 

This is what I had done but:

-i suppose options like EnableForAll are not working, since they are not defined in the config file

-background is plain black

 

EnableForAll is an optional field, if you want to apply dsdt patches to other OS, then add it to your config.plist and set it to yes...else it will default to not to.

 

background.png need to be resized to match your screen resolution, if your screen is 4k+ then background4k.png is used and also need to match as well.

Edited March 13, 2020 by n.d.k

[RazerXXX]

9 minutes ago, n.d.k said:

 

EnableForAll is an optional field, if you want to apply dsdt patches to other OS, then add it to your config.plist and set it to yes...else it will default to not to.

 

background.png need to be resized to match your screen resolution, if your screen is 4k+ then background4k.png is used and also need to match as well.

Is EnableForAll disabled by default if I do not add it to the config file?

 

Linux won't boot, Windows boots but shows graphical glitches with Windows logo on the side of the screen before booting

Edited March 13, 2020 by RazerXXX

[nmano]

OCB:LoadImage failed - Not Found

I can’t Boot windows 10

7:488  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,5D-F4-B3-81-5B-38-25-00)
7:488  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,5D-F4-B3-81-5B-38-25-00)\HD(1,GPT,85F84971-6BB4-4DA8-863B-91CF6B5A4170,0x800,0x108800)
7:489  0:000          Result of bootcode detection: bootable Windows (vista,win)
7:489  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,5D-F4-B3-81-5B-38-25-00)\HD(2,GPT,AD385919-8F10-4C38-AAB8-FF73E9D18B84,0x109000,0x32000)
7:489  0:000          Result of bootcode detection: bootable Windows (vista,win)
7:489  0:000  - [10]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,5D-F4-B3-81-5B-38-25-00)\HD(3,GPT,A19AEB4F-146F-4E43-8A96-F6068336074E,0x13B000,0x8000)
7:489  0:000  - [11]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,5D-F4-B3-81-5B-38-25-00)\HD(4,GPT,8F655BDA-C8BE-451E-A397-57708F8ED47D,0x143000,0x3A243000)
7:489  0:000          Result of bootcode detection: bootable Windows (vista,win)

Can you check my config Entries

config.plist

Thanks.

[Matgen84]

22 minutes ago, nmano said:

OCB:LoadImage failed - Not Found

I can’t Boot windows 10

7:488  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,5D-F4-B3-81-5B-38-25-00)
7:488  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,5D-F4-B3-81-5B-38-25-00)\HD(1,GPT,85F84971-6BB4-4DA8-863B-91CF6B5A4170,0x800,0x108800)
7:489  0:000          Result of bootcode detection: bootable Windows (vista,win)
7:489  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,5D-F4-B3-81-5B-38-25-00)\HD(2,GPT,AD385919-8F10-4C38-AAB8-FF73E9D18B84,0x109000,0x32000)
7:489  0:000          Result of bootcode detection: bootable Windows (vista,win)
7:489  0:000  - [10]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,5D-F4-B3-81-5B-38-25-00)\HD(3,GPT,A19AEB4F-146F-4E43-8A96-F6068336074E,0x13B000,0x8000)
7:489  0:000  - [11]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,5D-F4-B3-81-5B-38-25-00)\HD(4,GPT,8F655BDA-C8BE-451E-A397-57708F8ED47D,0x143000,0x3A243000)
7:489  0:000          Result of bootcode detection: bootable Windows (vista,win)

Can you check my config Entries

config.plist

Thanks.

 

On my system 1909, UEFI Windows order put EFI partition in second: so try PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,5D-F4-B3-81-5B-38-25-00)\HD(2,GPT,AD385919-8F10-4C38-AAB8-FF73E9D18B84,0x109000,0x32000)/\EFI\Microsoft\Boot\bootmgfw.efi

 

Check your partition manager on Windows. Good luck.

Edited March 13, 2020 by Matgen84

[nmano]

4 hours ago, Matgen84 said:

 

On my system 1909, UEFI Windows order put EFI partition in second: so try PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,5D-F4-B3-81-5B-38-25-00)\HD(2,GPT,AD385919-8F10-4C38-AAB8-FF73E9D18B84,0x109000,0x32000)/\EFI\Microsoft\Boot\bootmgfw.efi

 

Check your partition manager on Windows. Good luck.

I try your Entry but same Error  I have windows 10 1909 .Clover EFI worked.

 

[matgeo]

Is there any way to get rid of the rectangle selector in boot picker?

[Matgen84]

10 hours ago, nmano said:

I try your Entry but same Error  I have windows 10 1909 .Clover EFI worked.

 

 

I post a example, not your entry 

 

Do you check you the order, in disk manager on Windows!  I've a clean install of Windows 1909, so it use the new order describe before. 

 

Becareful: don't use back slash like in clover log, only slash in your pciroot. Sorry, I copy/paste pciroot from my Clover Log in my previous post.

 

Right way (example): PciRoot(0x0)/Pci(0x1D,0x0)/Pci(0x0,0x0)/NVMe(0x1,5D-F4-B3-81-5B-38-25-00)/HD(2,GPT,AD385919-8F10-4C38-AAB8-FF73E9D18B84,0x109000,0x32000)/\EFI\Microsoft\Boot\bootmgfw.efi

18 minutes ago, matgeo said:

Is there any way to get rid of the rectangle selector in boot picker?

 

Just rename selector.png to No_selector.png

Edited March 14, 2020 by Matgen84

[matgeo]

8 minutes ago, Matgen84 said:

Just rename selector.png to No_selector.png

Thanks.

And what about the rectangle for os name , like catalina, windows etc?

Any way to get rid if that, too?

[Matgen84]

6 minutes ago, matgeo said:

Thanks.

And what about the rectangle for os name , like catalina, windows etc?

Any way to get rid if that, too?

 

Personally, I rename Label.png to No_label.png. It works. Try it.

[btwise]

@ndkTimid to ask, whether you can use BootLiquor transparent processing methods or other schemes to improve the GUI effect. I love the capabilities of the NDK!