eSaF Posted October 18, 2020 Share Posted October 18, 2020 Ok with these new Intel kexts for B/T, I have no B/T. WIFI seems stable enough but B/T is a no no, what am I missing here? Spoiler Link to comment Share on other sites More sharing options...
Locked Down Posted October 18, 2020 Share Posted October 18, 2020 26 minutes ago, eSaF said: Ok with these new Intel kexts for B/T, I have no B/T. WIFI seems stable enough but B/T is a no no, what am I missing here? Reveal hidden contents Config looks good, are they the latest, v1.1.2 versions? 1 Link to comment Share on other sites More sharing options...
ainsleyclark Posted October 19, 2020 Share Posted October 19, 2020 (edited) Hey @AudioGod buddy. Thanks for the update on 0.6.2, as well as the F11L Bios. I updated my Bios and used the new configuration file you posted but it won't boot? It starts to boot up and restarts immediately, too quickly I can't see whats happening. I have Reset NVRAM cleared kext cache etc but no avail, any ideas what my cause that? 0.60 still works fine with Big Sur, only thing I changed was Serial & MLB info on the config.plist Thanks! Edited October 19, 2020 by ainsleyclark Link to comment Share on other sites More sharing options...
eSaF Posted October 19, 2020 Share Posted October 19, 2020 11 hours ago, Locked Down said: Config looks good, are they the latest, v1.1.2 versions? Yes they are, I was particularly meticulous about the versions I chose. The concept is very exciting but as the process is still on going, I will hold off but will keep the EFI Folder with the Intel WIFI/BT kexts on a USB test drive for a later date. Link to comment Share on other sites More sharing options...
AudioGod Posted October 19, 2020 Author Share Posted October 19, 2020 (edited) 1 hour ago, ainsleyclark said: Hey @AudioGod buddy. Thanks for the update on 0.6.2, as well as the F11L Bios. I updated my Bios and used the new configuration file you posted but it won't boot? It starts to boot up and restarts immediately, too quickly I can't see whats happening. I have Reset NVRAM cleared kext cache etc but no avail, any ideas what my cause that? 0.60 still works fine with Big Sur, only thing I changed was Serial & MLB info on the config.plist Thanks! Thats strange as a bunch of us are running BigSur using that EFI with no troubles. download the EFI again and try a second time please. Edited October 19, 2020 by AudioGod 1 Link to comment Share on other sites More sharing options...
Benjamin Franklin Posted October 19, 2020 Share Posted October 19, 2020 (edited) 22 hours ago, AudioGod said: There’s actually drivers now for the onboard WiFi card. It’s still very much in development but it got to the point where it works now, soon I might integrate it into my EFI but I’m waiting until it’s perfect before I go and do anything like that. if you fancy trying it then here’s the link to the repo. https://github.com/OpenIntelWireless If you have a crack at it then let me know how you get on. If anybody else reading this fancy’s trying it out then please do report back to me on here with your results. Good evening London, here are the results of the Dutch jury: Royaume-uni: Douze points United Kingdom: Twelve points ... oh wait a minute, wrong forum So I gave it a go, downloaded latest drivers for Catalina (I used the AirportItlwm btw) * I did not remove the Fenvi (I simply don't have the time to open the case, pull the card etc. -- and no, it's no plain laziness ) - wifi works -- throughput was 20Mpbs on 5ghz vs Fenvi's 77Mpbs on 5ghz - bluetooth was not discovered, instead it used the bluetooth on the Fenvi - continuity worked (opening webpage, calling via iphone) - airdrop did not work - sidecard with ipad did not work Edited October 19, 2020 by Benjamin Franklin Mbps corrected to Mpbs 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted October 19, 2020 Share Posted October 19, 2020 8 minutes ago, Benjamin Franklin said: Good evening London, here are the results of the Dutch jury: Royaume-uni: Douze points United Kingdom: Twelve points ... oh wait a minute, wrong forum So I gave it a go, downloaded latest drivers for Catalina (I used the AirportItlwm btw) * I did not remove the Fenvi (I simply don't have the time to open the case, pull the card etc. -- and no, it's no plain laziness ) - wifi works -- throughput was 20mpbs on 5ghz vs Fenvi's 77mpbs on 5ghz - bluetooth was not discovered, instead it used the bluetooth on the Fenvi - continuity worked (opening webpage, calling via iphone) - airdrop did not work - sidecard with ipad did not work Hi @Benjamin Franklin For my Fenvi, I use boot-args brcmfx-country=#a (Catalina) and brcmfx-country=#a brcmfx-driver=2 (Big Sur) latest AirportBrcmFixUp.kext: 351 mpbs on 5 Ghz (instead of 59mbps before) You can't try, if you want. 2 Link to comment Share on other sites More sharing options...
Benjamin Franklin Posted October 19, 2020 Share Posted October 19, 2020 (edited) 1 hour ago, Matgen84 said: Hi @Benjamin Franklin For my Fenvi, I use boot-args brcmfx-country=#a (Catalina) and brcmfx-country=#a brcmfx-driver=2 (Big Sur) latest AirportBrcmFixUp.kext: 351 mpbs on 5 Ghz (instead of 59mbps before) You can't try, if you want. That's very nice of you to share, however, I don't have a problem with my Fenvi and the report was on using the OpenIntelWireless drivers as requested by Audiogod. The reported throughput was via speedtest.net and the Fenvi reaches the max downstream with my provider. I could test manually the throughput to my NAS, but don't see the point of it as the speedtest results are fine by me. Network Utilty reports 304.2 mbps (the speedtrest results mentioned in the previous comment were Mbps -- I corrected the m to M)) I too use boot-args brcmfx-country=#a (Catalina). Cheers. Edited October 19, 2020 by Benjamin Franklin Added network utility output 1 Link to comment Share on other sites More sharing options...
hungrywallet Posted October 19, 2020 Share Posted October 19, 2020 Hey Guys, What settings would I need to change in OpenCore's config so that Windows is not detected whatsoever? I've tried a few options but also lose MacOS detection. Link to comment Share on other sites More sharing options...
AudioGod Posted October 19, 2020 Author Share Posted October 19, 2020 7 minutes ago, hungrywallet said: Hey Guys, What settings would I need to change in OpenCore's config so that Windows is not detected whatsoever? I've tried a few options but also lose MacOS detection. Sorry buddy what do you mean exactly? Link to comment Share on other sites More sharing options...
Locked Down Posted October 19, 2020 Share Posted October 19, 2020 3 minutes ago, hungrywallet said: Hey Guys, What settings would I need to change in OpenCore's config so that Windows is not detected whatsoever? I've tried a few options but also lose MacOS detection. The easiest way is to open your config.plist file with Opencore Configurator. Select Misc on the left hand side and then Security at the top. If you then click on the icon next to Scan Policy you can choose what to show. Deselect what you don't want to see, eg deselecting OC_SCAN_ALLOW_FS_NTFS will hide Windows. 2 Link to comment Share on other sites More sharing options...
eSaF Posted October 19, 2020 Share Posted October 19, 2020 @Locked Down - You beat me to it, or another way, leave Scan Policy at Default value instead of zero will hide Windows if I remember correctly. Link to comment Share on other sites More sharing options...
Locked Down Posted October 19, 2020 Share Posted October 19, 2020 2 minutes ago, eSaF said: @Locked Down - You beat me to it, or another way, leave Scan Policy at Default value instead of zero will hide Windows if I remember correctly. There is no Default for scan policy, it has to be a number. You are probably mixing it up with SecureBootModel which is generally set to Default. Link to comment Share on other sites More sharing options...
eSaF Posted October 19, 2020 Share Posted October 19, 2020 11 minutes ago, Locked Down said: There is no Default for scan policy, it has to be a number. You are probably mixing it up with SecureBootModel which is generally set to Default. So am I wrong here? 1 Link to comment Share on other sites More sharing options...
AudioGod Posted October 19, 2020 Author Share Posted October 19, 2020 @eSaF That’s absolutely correct. Your spot on there bro. 1 1 Link to comment Share on other sites More sharing options...
Locked Down Posted October 19, 2020 Share Posted October 19, 2020 5 minutes ago, eSaF said: So am I wrong here? I see what you mean now, the default number as per the sample.plist, not the word 'default' Link to comment Share on other sites More sharing options...
eSaF Posted October 19, 2020 Share Posted October 19, 2020 @Locked Down - Am I vindicated with my answer? Or should I address you by your previous name, I think it was TOODLES. 2 Link to comment Share on other sites More sharing options...
Locked Down Posted October 19, 2020 Share Posted October 19, 2020 2 minutes ago, eSaF said: @Locked Down - Am I vindicated with my answer? Or should I address you by your previous name, I think it was TOODLES. ?? Link to comment Share on other sites More sharing options...
eSaF Posted October 19, 2020 Share Posted October 19, 2020 1 minute ago, Locked Down said: ?? No not ?? - TOODLES but it's ok if you want to be coy about your past on this Thread, here's to hoping we left the drama behind. Link to comment Share on other sites More sharing options...
AudioGod Posted October 19, 2020 Author Share Posted October 19, 2020 Just now, eSaF said: No not ?? - TOODLES but it's ok if you want to be coy about your past on this Thread, here's to hoping we left the drama behind. Your be lucky bro or should I say I would be lucky. 2 Link to comment Share on other sites More sharing options...
Locked Down Posted October 19, 2020 Share Posted October 19, 2020 2 minutes ago, AudioGod said: Your be lucky bro or should I say I would be lucky. 2 minutes ago, eSaF said: No not ?? - TOODLES but it's ok if you want to be coy about your past on this Thread, here's to hoping we left the drama behind. Sorry, no idea what you are talking about. Please fill me in. 1 Link to comment Share on other sites More sharing options...
AudioGod Posted October 19, 2020 Author Share Posted October 19, 2020 1 minute ago, Locked Down said: Sorry, no idea what you are talking about. Please fill me in. I don’t know toddles, I ain’t got a clue myself. We both are clueless. Sick tings man. Ruff lol 1 Link to comment Share on other sites More sharing options...
eSaF Posted October 19, 2020 Share Posted October 19, 2020 1 minute ago, Locked Down said: Sorry, no idea what you are talking about. Please fill me in. Lets just say I have a knack at spotting Bots and Trolls, they have the same trait of shooting down other members without checking facts first even when they are kicked from the Thread and come back. I am not saying I'm always right with answers but when I am wrong I admit it and eat the biggest slice of humble pie. We are here to help each other not to be argumentative with other members. PEACE. Link to comment Share on other sites More sharing options...
Locked Down Posted October 19, 2020 Share Posted October 19, 2020 Sorry if I misunderstood your answer.. I thought you meant use the word 'Default' but you meant the default number that is in the sample.plist. In the same tab in Opencore Configurator the SecureBootModel has a number of options it can be set at, one of them being the word Default, I thought you had mixed up the two. Sorry for the misunderstanding. 1 Link to comment Share on other sites More sharing options...
eSaF Posted October 19, 2020 Share Posted October 19, 2020 1 minute ago, Locked Down said: Sorry if I misunderstood your answer.. I thought you meant use the word 'Default' but you meant the default number that is in the sample.plist. In the same tab in Opencore Configurator the SecureBootModel has a number of options it can be set at, one of them being the word Default, I thought you had mixed up the two. Sorry for the misunderstanding. It's ok misunderstandings I can easily forgive and forget, as I said, we are here to help each other. Without Audiogod's guidance on this Thread I would be still faffing about trying to get my Hack stable so I have Big Respect for the Man. 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts