Matgen84 Posted January 19, 2020 Share Posted January 19, 2020 2 minutes ago, AudioGod said: Oh yes I remember now, while treeking the igpu memory. Do you remember test for VirtualSMC and FakeSMC posted in MP about some smcKey errors? Link to comment Share on other sites More sharing options...
AudioGod Posted January 19, 2020 Author Share Posted January 19, 2020 (edited) 2 minutes ago, Matgen84 said: Do you remember test for VirtualSMC and FakeSMC posted in MP about some smcKey errors? The smc errors you were getting? i do indeed yes, did you get to the bottom of it? Edited January 19, 2020 by AudioGod Link to comment Share on other sites More sharing options...
Matgen84 Posted January 19, 2020 Share Posted January 19, 2020 (edited) 55 minutes ago, AudioGod said: The smc errors you were getting? i do indeed yes, did you get to the bottom of it? I talk about these errors (SMBIOS Imac19,1 - Catalina): no solution for the moment. With VirtualSMC 1.0.9/ 1.1.0 (AppleSMCLMU) AppleLMUController::smcGetKeyInfo Error: received error 0x84 when getting key info for 'ALRV' (AppleSMCLMU) AppleLMUController::smcReadKey Error: received error 0x84 when reading key 'MSLD' (AppleSMCLMU) AppleLMUController::smcReadKey Error: received error 0x84 when reading key 'ALV0' With FakeSMC 3.5.3 (AppleSMCLMU) AppleLMUController::smcReadKey Error: received error 0x84 when reading key 'MSLD' EDIT: I don't understand why I use Desktop SMBIOS not Laptop. Edited January 19, 2020 by Matgen84 Link to comment Share on other sites More sharing options...
psycato Posted January 21, 2020 Share Posted January 21, 2020 Hey, thanks a thousand for this guide (and glasgood's)! Install went more or less without a hickup, and everything seemed to be working perfectly. However, I'm having these weird small lags where the application I'm in will just stop responding and/or keyboard input stops. The dreaded spinning wheel rainbow wheel shows up now and then. Every UI transition is buttery smooth, however, so I dont think it is related to the GPU? It seems to be completely random. There is no CPU spike going on (I've got Activity monitor up at all times monitoring the state of things) Also, some programs seem to open very random, i.e activity monitor takes a good 7-8 seconds with the spinning wheel. This is my first hackintosh, so I'm kind of at a loss at how I should even start looking for what's wrong.. My setup: 9900k Aorus Master rx 580 64 gb memory 1080ti disabled by properties firmware F11c Please let me know if there is any other information I can provide that'll help in troubleshooting.. Link to comment Share on other sites More sharing options...
AudioGod Posted January 22, 2020 Author Share Posted January 22, 2020 15 hours ago, psycato said: Hey, thanks a thousand for this guide (and glasgood's)! Install went more or less without a hickup, and everything seemed to be working perfectly. However, I'm having these weird small lags where the application I'm in will just stop responding and/or keyboard input stops. The dreaded spinning wheel rainbow wheel shows up now and then. Every UI transition is buttery smooth, however, so I dont think it is related to the GPU? It seems to be completely random. There is no CPU spike going on (I've got Activity monitor up at all times monitoring the state of things) Also, some programs seem to open very random, i.e activity monitor takes a good 7-8 seconds with the spinning wheel. This is my first hackintosh, so I'm kind of at a loss at how I should even start looking for what's wrong.. My setup: 9900k Aorus Master rx 580 64 gb memory 1080ti disabled by properties firmware F11c Please let me know if there is any other information I can provide that'll help in troubleshooting.. Hey buddy sorry for the late response, how are you disabling the 1080ti ? have you tried the hack without it installed to see if the problem remains? Link to comment Share on other sites More sharing options...
psycato Posted January 22, 2020 Share Posted January 22, 2020 51 minutes ago, AudioGod said: Hey buddy sorry for the late response, how are you disabling the 1080ti ? have you tried the hack without it installed to see if the problem remains? Hey, thanks for the reply. I've disabled it according to -> https://khronokernel-4.gitbook.io/disable-unsupported-gpus/ It does not show up in catalina system report. I have not tried pulling the power from it, do you think it could be the culprit? Link to comment Share on other sites More sharing options...
AudioGod Posted January 22, 2020 Author Share Posted January 22, 2020 Just now, psycato said: Hey, thanks for the reply. I've disabled it according to -> https://khronokernel-4.gitbook.io/disable-unsupported-gpus/ It does not show up in catalina system report. I have not tried pulling the power from it, do you think it could be the culprit? Just to make sure and if it’s not a hassle then remove it and see as it’s Ann easy test to do and will eliminate that all together if t still happening. 1 Link to comment Share on other sites More sharing options...
psycato Posted January 22, 2020 Share Posted January 22, 2020 2 minutes ago, AudioGod said: Just to make sure and if it’s not a hassle then remove it and see as it’s Ann easy test to do and will eliminate that all together if t still happening. I'll give it a tonight and report back. Link to comment Share on other sites More sharing options...
AudioGod Posted January 22, 2020 Author Share Posted January 22, 2020 (edited) Edited January 22, 2020 by AudioGod Link to comment Share on other sites More sharing options...
psycato Posted January 22, 2020 Share Posted January 22, 2020 5 hours ago, AudioGod said: So I disconnected the 1080 ti (power only) and obviously had to turn the PC off for that, but so far it is not showing any signs of lag/stutter/freezing, but they didn't start showing until after a couple of days where the PC had been in sleep mode every night. I'll let it run like this for the next couple of days and see if it creeps back in.. Link to comment Share on other sites More sharing options...
AudioGod Posted January 22, 2020 Author Share Posted January 22, 2020 11 minutes ago, psycato said: So I disconnected the 1080 ti (power only) and obviously had to turn the PC off for that, but so far it is not showing any signs of lag/stutter/freezing, but they didn't start showing until after a couple of days where the PC had been in sleep mode every night. I'll let it run like this for the next couple of days and see if it creeps back in.. Perfect do exactly that and report back with your findings. if it is the 1080ti we may need to disable it with a ssdt or via the dsdt if the clover method isn’t doing its job for you. 1 Link to comment Share on other sites More sharing options...
psycato Posted January 22, 2020 Share Posted January 22, 2020 (edited) 59 minutes ago, AudioGod said: Perfect do exactly that and report back with your findings. if it is the 1080ti we may need to disable it with a ssdt or via the dsdt if the clover method isn’t doing its job for you. I'm starting to think it's related to the RX 580. I did notice that it was using almost 100% memory yesterday when it really started acting up. I just noticed a couple of micro freezes and it looks like the GPU memory usage is slowly increasing.. -> Thoughts? Edit: Note, the freezes now just happened when I connected my watch (garmin) to sync it with garmin express. Edited January 22, 2020 by psycato Link to comment Share on other sites More sharing options...
decat Posted January 23, 2020 Share Posted January 23, 2020 @psycato I'm have a similiar setup (Aorus Master, 9700k, less RAM = 16gb and a RX580) and got no freezes or whatsoever. What monitoring tool is that? Would love to check what the memory of my rx is doing. Link to comment Share on other sites More sharing options...
psycato Posted January 23, 2020 Share Posted January 23, 2020 1 hour ago, decat said: @psycato I'm have a similiar setup (Aorus Master, 9700k, less RAM = 16gb and a RX580) and got no freezes or whatsoever. What monitoring tool is that? Would love to check what the memory of my rx is doing. istat menus Link to comment Share on other sites More sharing options...
RHack Posted January 23, 2020 Share Posted January 23, 2020 (edited) Works like a charm for me on two machines with minor adaptions. Namely this NVRAM fix: https://www.reddit.com/r/hackintosh/comments/erd2th/nvram_for_all_300_series_users_rejoice/ And the FileVault extras from here: https://fewtarius.gitbook.io/laptopguide/extras/enabling-filevault May I suggest the addition of these to the project? Machine 1: Z390 Aorus Master, i9-9900k, 5700 XT SE, 64GB RAM Machine 2: Z390 Aorus Master, i7-8700k, Vega 56, 16 GB RAM Edited January 23, 2020 by RHack Link to comment Share on other sites More sharing options...
AudioGod Posted January 23, 2020 Author Share Posted January 23, 2020 (edited) @RHack don’t use this ssdt....It has been implemented in my DSDTs by MaLD0n since I started releasing my EFIs, this is why I have always had a native nvram to start with. totally not needed. No one should install the SSDT additionally on my EFI cause it's redundant !! Edited January 23, 2020 by AudioGod 1 Link to comment Share on other sites More sharing options...
psycato Posted January 23, 2020 Share Posted January 23, 2020 I mean.. Is this normal? Link to comment Share on other sites More sharing options...
AudioGod Posted January 23, 2020 Author Share Posted January 23, 2020 2 minutes ago, psycato said: I mean.. Is this normal? Nope that shouldn’t happen. have you got more then one monitor hooked up? if you do drop down to a single screen and see if it keeps doing it. Link to comment Share on other sites More sharing options...
psycato Posted January 23, 2020 Share Posted January 23, 2020 1 minute ago, AudioGod said: Nope that shouldn’t happen. have you got more then one monitor hooked up? if you do drop down to a single screen and see if it keeps doing it. No, only one monitor -> Link to comment Share on other sites More sharing options...
AudioGod Posted January 23, 2020 Author Share Posted January 23, 2020 Interesting, what monitor exactly do you have and is it RGB or ARGB? Link to comment Share on other sites More sharing options...
psycato Posted January 23, 2020 Share Posted January 23, 2020 7 minutes ago, AudioGod said: Interesting, what monitor exactly do you have and is it RGB or ARGB? Samsung CRG90. Not sure if it's argb or rgb? Link to comment Share on other sites More sharing options...
AudioGod Posted January 23, 2020 Author Share Posted January 23, 2020 Just now, psycato said: Samsung CRG90. Not sure if it's argb or rgb? No worries I’m researching it now. Link to comment Share on other sites More sharing options...
jake_mike Posted January 25, 2020 Share Posted January 25, 2020 A very big thank you for this guide!! It made my first Hackintosh installation very smooth and easy!! I am having couple of issues after the installation: 1. My dual monitor setup does not seem to work. Both monitors are detected but the image is displayed on only one. 2. When I wake up the computer after the sleep, the image does not come on (black screen). Need to hard reset. 3. The Geekbench scores are super low, but the system itself seems to be working fast. My system: Intel i9-9990k Gigabyte Aorus Z390 Master (BIOS F11c) Corsair 16GB 4000MHz DDR4 XFX Radeon VII 16GB 2 x Samsung 970 EVO Plus 500GB 2 x LG 27UK650 Monitors EFI: Aorus Z390 Master F11c Navi Vega VII EFI.zip BIOS Profile: F11c MSR Unlocked Profile.zip I would be grateful for any advice. Link to comment Share on other sites More sharing options...
AudioGod Posted January 25, 2020 Author Share Posted January 25, 2020 (edited) 16 minutes ago, jake_mike said: A very big thank you for this guide!! It made my first Hackintosh installation very smooth and easy!! I am having couple of issues after the installation: 1. My dual monitor setup does not seem to work. Both monitors are detected but the image is displayed on only one. 2. When I wake up the computer after the sleep, the image does not come on (black screen). Need to hard reset. 3. The Geekbench scores are super low, but the system itself seems to be working fast. My system: Intel i9-9990k Gigabyte Aorus Z390 Master (BIOS F11c) Corsair 16GB 4000MHz DDR4 XFX Radeon VII 16GB 2 x Samsung 970 EVO Plus 500GB 2 x LG 27UK650 Monitors EFI: Aorus Z390 Master F11c Navi Vega VII EFI.zip BIOS Profile: F11c MSR Unlocked Profile.zip I would be grateful for any advice. your Geekbench score are right for Geekbench 5. (they changed the scoring system from version 5 on) if you wanna see bigger numbers use Geekbench 4 but it looks correct to me. how are the monitors conenected to the gpu? have you also removed the boot argument darkwake=8? if so then put it back or if you haven't change it to darkwake=0 instead. sorry also if you dont care about sidecar then you might be better off changing the smbios to imacpro1,1 and disabling the igpu in the bios. having the igpu enabled can hamper performance of the Radeon VII as it can render a lot quicker then the igpu using quick sync can. here use this EFI with new details as its a different smbios and disable the igpu in the bios. AudioGod 1,1 EFI.zip Edited January 25, 2020 by AudioGod 1 Link to comment Share on other sites More sharing options...
jake_mike Posted January 25, 2020 Share Posted January 25, 2020 3 minutes ago, AudioGod said: your Geekbench score are right for Geekbench 5. (they changed the scoring system from version 5 on) if you wanna see bigger numbers use Geekbench 4 but it looks correct to me. how are the monitors conenected to the gpu? have you also removed the boot argument darkwake=8? if so then put it back or if you haven't change it to darkwake=0 instead. Ah cool, they seemed to be off when I was comparing to yours that's why I was a bit concerned One is connected via HDMI, second via DP (using DP to HDMI adapter). I did not touch any arguments in the Clover config. I am complete Hackintosh noob, started learning yesterday (using your guide). Link to comment Share on other sites More sharing options...
Recommended Posts