Matt Thompson Rockethouse Posted September 27, 2007 Share Posted September 27, 2007 Just in case anyone is looking for professional cards that work in OSX86 I can confirm the RME HDSP9652 pci card works flawlessly down to latency buffer sizes of 64 samples. Fireface 800 also works perfectly, and the TC Konnekt 24D firewire also works perfectly. Folks looking for a good cheap but high quality option should consider either the Konnekt 8 or the Konnekt 24D, both are firewire and frankly, blow your inbuilt soundcards or cheap Creative Labs out of the water for quality and stability. Link to comment Share on other sites More sharing options...
Edis0n Posted October 12, 2007 Share Posted October 12, 2007 Here you have modified .kext for ADI198x included in Dell Optiplex GX 520/620, i.e. ICH7. Tested with JaS 10.4.8. Enjoy L.E.: Tested with 10.4.10, too, works flawless. AppleAC97Audio.zip Link to comment Share on other sites More sharing options...
thorne Posted November 16, 2007 Share Posted November 16, 2007 Hi, The Plantronics USB Headphones are plug and play (as in they work without any fuss. Plug them in an go). Link to Headphones Link to comment Share on other sites More sharing options...
Edis0n Posted November 17, 2007 Share Posted November 17, 2007 Would it be possible you can re-attach the file you posted. I too have a Dell Optiplex GX620 and got TOH's Leopard finally installed but don't have any sound installed. Thank you. Sorry for the delay, I have been away from home... I have reattached the .kext in the original post, hope it works now Link to comment Share on other sites More sharing options...
wmarsh Posted November 21, 2007 Share Posted November 21, 2007 Rammjet -- Your link to 10.4.7 CMI8738 kext is dead. This was Dogberts driver originally written for 10.4.1 I recompiled the kext for 10.4.3. That kext still works. The original link is here. http://forum.insanelymac.com/index.php?sho...rt=0#entry47337 The kexts are also available here: http://scifi.pages.at/ffm-2/ Link to comment Share on other sites More sharing options...
MilitantHippie Posted November 28, 2007 Share Posted November 28, 2007 Lenovo 3000 N100 fix: http://forum.insanelymac.com/index.php?showtopic=73693 Link to comment Share on other sites More sharing options...
JSn1™ Posted December 3, 2007 Share Posted December 3, 2007 For Realtek ALC 662 use Azalia kext method. I saw also an installer that worked fine, just I don't remember where to get it. Link to comment Share on other sites More sharing options...
Mac Loz Posted December 12, 2007 Share Posted December 12, 2007 hi all just a noob question how to i knw what sound card im using cuz i have compaq presario c304nr but i can't find any where what sound card its using....i found that its altec lansing but that doesn't help alot. Link to comment Share on other sites More sharing options...
newnekton1 Posted December 25, 2007 Share Posted December 25, 2007 Audio drivers for Intel 945Gcz mainboard? Had no success getting HD 5.1 output with 10.5.1 although can use USB stick without problems. Is there a kext known to work with this Intel board? Link to comment Share on other sites More sharing options...
gabrigee Posted December 27, 2007 Share Posted December 27, 2007 Hi guys does anybody know about mic-in with the asus p5b-vm ? I got sound output working with the azalia driver, what about input ? Link to comment Share on other sites More sharing options...
FutureShock Posted December 27, 2007 Share Posted December 27, 2007 Hi, maybe someone can help me here... i don't know if its correctly, i have posted in osx86 installation forum too but i think heres the better place for it! First... i have a Asus Maximus Mainboard X38 (Intel ICH9, as far as i know!) i have done the following steps: searched for a AC97 Kext... i have edited the kext ... added following VEN ID 11D4 and Dev 198B - 0x11D4198B then typed kextload -t /System/Library/Extensions/AppleAC97Audio.kext no errors and typed kextcache -k /System/Library/Extensions and reboot but no Sound working i can load the kext... successfully as terminal says... when i do a kextstat i see the kext in last line... but after reboot the kext is gone and still no sound ?! what did i'm wrong? i also edited the codec kext... added ads70 and a few more... only to be sure to match the correctly... i didn know the ads id.... Link to comment Share on other sites More sharing options...
Marcaen Posted December 29, 2007 Share Posted December 29, 2007 Hi, maybe someone can help me here... i don't know if its correctly, i have posted in osx86 installation forum too but i think heres the better place for it! First... i have a Asus Maximus Mainboard X38 (Intel ICH9, as far as i know!) i have done the following steps: searched for a AC97 Kext... i have edited the kext ... added following VEN ID 11D4 and Dev 198B - 0x11D4198B then typed kextload -t /System/Library/Extensions/AppleAC97Audio.kext no errors and typed kextcache -k /System/Library/Extensions and reboot but no Sound working i can load the kext... successfully as terminal says... when i do a kextstat i see the kext in last line... but after reboot the kext is gone and still no sound ?! what did i'm wrong? i also edited the codec kext... added ads70 and a few more... only to be sure to match the correctly... i didn know the ads id.... During the Kalyway Leopard install, you should have selected the first Azalia audio option when you customized the install. It worked for me with no edits required on my Maximus Formula. You can try using Pacifist on the disc to see if you can grab the AppleAzaliaAudio.kext and revert your changes back to defaults. Link to comment Share on other sites More sharing options...
Evsei Agron Posted December 30, 2007 Share Posted December 30, 2007 hey does anyone has a solution for my audio to work? i run tiger osx 10.4.5 and have audio onboard INTEL 82801BA/BAM AC97 i changed my kext's and they load fine, but i still got no sound or audio device detected... Link to comment Share on other sites More sharing options...
BabyMac Posted January 15, 2008 Share Posted January 15, 2008 Hello... i use MainBoard ECS 945GCT - M2 (Ver1)... and Soundcard IDT 92HD202 And i can't listen music, Someone has Driver for IDT 92HD202 (Kalyway) pls share for me... Thanks Link to comment Share on other sites More sharing options...
GeneJin Posted January 17, 2008 Share Posted January 17, 2008 I've scorn the whole forum and cant find any info about using a PCI SoundBlaster Live! as the sound card, any advice? Thanks in advance. I'm using my on board as sound now. Link to comment Share on other sites More sharing options...
macgirl Posted January 18, 2008 Share Posted January 18, 2008 Because it doesn't work. And yes there are threads and posts about Soundblaster Live that say that. Link to comment Share on other sites More sharing options...
crickman Posted January 18, 2008 Share Posted January 18, 2008 Hi, I have mac osx86 running succesfuly with everything working but the sound. It is running on a Dell Inspiron 8200 (intel). My built in sound is a Crystal 4205. Please any ideas on how to get this to work? I have a usb sound stick but because this is a laptop i prfer not to have stuff sticking out. Thanks! ,CRickman Link to comment Share on other sites More sharing options...
raidmarji Posted February 6, 2008 Share Posted February 6, 2008 Hi Any Success with Sigmatel 9200? With Dell Inspiron 6400, everything is working out of the Box (Bluetooth, Wireless network...etc. I'm Using kalyway 10.5.1 Link to comment Share on other sites More sharing options...
Skoompan Posted February 12, 2008 Share Posted February 12, 2008 can sb tell me how to uninstall the sound driver? because if i install a new one it doesnt apply the changes Link to comment Share on other sites More sharing options...
meischder Posted February 24, 2008 Share Posted February 24, 2008 What can I do when i have a ALC889A audio-chipset- Where i can find a solution? Link to comment Share on other sites More sharing options...
ka911 Posted February 25, 2008 Share Posted February 25, 2008 hi to all, I have HP PC and it has ASUS A8M2N-LA MB. I have Leo 10.5.2 right now runing with out any problem but the no sound! this MB has ALC888 and I did download anything that people say it maywork but no luck yet. I hoping if any one can assist me. thanks. Link to comment Share on other sites More sharing options...
sleepy_yellow Posted March 2, 2008 Share Posted March 2, 2008 are they any drivers for the CMI8788 chipset from c-media? im using leopard 15.5.2 Link to comment Share on other sites More sharing options...
nyukeit Posted March 3, 2008 Share Posted March 3, 2008 any solutions for Conexant High Def Audio? detected as Intel High Def Audio by Mac on my HP Pavilion dv2119TX.... EDIT::: GOT IT... THNX.... Link to comment Share on other sites More sharing options...
nyukeit Posted March 3, 2008 Share Posted March 3, 2008 please help.. I have this Azalia audio kext thing for Conexant HD Audio on my 2119TX laptop. can someone please guide how to modify and use this .kext thing? I m clueless regarding this target directory and stuff.... Link to comment Share on other sites More sharing options...
Brucep Posted March 18, 2008 Share Posted March 18, 2008 hi there.. for the SB400 chipset (x200) which file do i need?? thanx a lot! Link to comment Share on other sites More sharing options...
Recommended Posts