AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

Sharkus · January 8, 2020

10 hours ago, skinhorserame said:

Resolved myself.

My mistake was login iMessage with just created test AppleId (not my real).

I cleaned system as wrote in https://www.tonymacx86.com/threads/an-idiots-guide-to-imessage.196827/ and login with real AppleId. Works fine.

Again Great thanks @AudioGod and @Sharkus for their work - all works!

Sweet and congrats! I'm loving my system so far.

Have you tried Amazon Prime Video under Safari? Can you see if you can decode the following DRM protected video using Safari on the following page: https://bitmovin.com/demos/drm

-Marcus

vboyz103 · January 8, 2020

14 hours ago, WizeMan said:

Very hard for someone else without the same monitor to tell you whether it’s an HDMI cable issue. I’m running 4K with my Samsung 29” monitor without any problem via display port.

You can always try using another high quality cable or a display port cable if your monitor supports it.

I went and bought a 18gbs 4K HDMI cable (Monster) and it worked beautifully no flickering at native 4K @ 60Hz.

On a different note, there are couple of things that are not working properly.

1. Shutdown - on shutdown the computer reboots instead

2. Sleep - Blank screen coming out of sleep

Can someone point me to instructions how to fix these issues?

TIA

panosru · January 8, 2020

@AudioGod thanks for the new EFI mate! It works fine! I also updated to latest clover version.

With 64MB & Total: 256MB

With 512MB and Total MAX:

WizeMan · January 8, 2020

Soooo I just received my MSI Vega 56. Switched to the Vega / Navi EFI, cleared my NVRAM and set the EFI using my serial etc etc.

AppleTV(+) works fine
Netflix works fine

But Amazon Prime does not work. BitMoving test does not work either.

With SMBios iMacPro1,1 Amazon Prime Video seems to be working OK (BitMovin test videos do NOT) but I'd like to keep iMac19,1 for the same reasons @AudioGod has. explained. Is there any possibility I am doing something wrong?

Edited January 8, 2020 by WizeMan

hungrywallet · January 8, 2020

On 1/6/2020 at 4:43 PM, skinhorserame said:

Hello, everybody!

Great thanks @AudioGod and @Sharkus for their work.

Via your manuals I successfully installed Catalina 10.15.2 on Z390 Elite. Works SideCar and I am not see any errors, except one - iMassage and others do not work.

I unsuccessfully tried three times steps from PART 6 – ENABLE IMESSAGES & FACETIME in "Glasgood's macOS Catalina [INSTALL GUIDE] Aorus Z390 Pro & Z390 Master".

I guess the reason is the hardware, but not sure.

My first Hackintosh hardware:

Case - Zalman N2
CPU cooler - GameMax Gamma 500 RGB
CPU - Intel I7 9700 (without letters)
MB - GigaByte Z390 AORUS Elite/StarWars
PSU - 700W Be Quiet, "PURE POWER 11", 4*PCI-E, 120mm, Gold80+
RAM - DDR4 64GB (16GB*4) Corsair VENGEANCE AirFlow LPX 2666 [CMK128GX4M8A2666C16]
SSD - Samsung 970 EVO 500GB
Video - ASUS RX580 8GB
WiFi & Bluetooth - BCM943602CS in PCI-E (installed like wrote in @AudioGod's manual)

EFI 03/01/2020 19,1 Aorus Z390 Pro RX Polaris EFI

BIOS F10a, settings from @Sharkus's profile with one change - VT-d Enabled (I need Docker).

Can somebody helps me? What can I make better?

This usually never works for me and I follow the instructions religiously and a bunch of others found online. In the end I always have to call Apple to get these working. They might just have my account flagged or something.

mazagngy · January 8, 2020

hi

this is my setup

z390 aorus pro wifi bios F11

i7 9700k

2x8 corsair vengeance rgb pro 3000

WD black 1TB HDD for data

samsung evo 970 nvme 1TB windows 10 UEFI

samsung 860 SDD 500 for mac

GPU RTX2070

i know my GPU not compatible with mac and i dont have a problem to use the UHD 630

i need to know how to edit the clover config.plist to remove the AMD gpu config and make it use my internal GPU inside windows using note++ because i dont have any mac

or if anyone can make it for kindly

i downloaded the 1st EFI.zip folder to edit it and i have a dmg for Catalina with clover

so i will use transmac to burn the dmg to a usb and mount the efi partition so i can remove the clover folder and use the one in the OP

and i heard that the nvme not play nice while installing mac so should i remove it until i can install mac or can i add any kext to fix that

sry for my bad English

MaLd0n · January 8, 2020

3 hours ago, mazagngy said:

i need to know how to edit the clover config.plist to remove the AMD gpu config and make it use my internal GPU inside windows using note++ because i dont have any mac

or if anyone can make it for kindly

try with -wegnoegpu bootarg

mazagngy · January 8, 2020

12 minutes ago, MaLd0n said:

try with -wegnoegpu bootarg

thank you for ur reply

i will try now and let you know if it worked

mazagngy · January 8, 2020

1 hour ago, MaLd0n said:

try with -wegnoegpu bootarg

i made the usb catalina 10.15

mounted the efi and replace the clover folder with the one in OP and set my bios like the op

removed my nvme ssd m2

1st try using the internal gpu with -v -wegnoegpu

no luck the pc restart itself

2nd try using the rtx2070 with -v or -v -wegnoegpu also same thing restart itself

i got same result in 1st and 2nd try

look at the pic

skinhorserame · January 9, 2020

19 hours ago, Sharkus said:

Sweet and congrats! I'm loving my system so far.

Have you tried Amazon Prime Video under Safari? Can you see if you can decode the following DRM protected video using Safari on the following page: https://bitmovin.com/demos/drm

-Marcus

Сlicking on this link in Safari froze my Hackintosh, so deeply that even the Magic Touchpad 2 doesn’t work (no click).

In Chrome - OK.

In Safari on MacBook Pro Retina 2014 - OK.

What does it mean?

Edited January 9, 2020 by skinhorserame

AudioGod · January 9, 2020

53 minutes ago, skinhorserame said:

Сlicking on this link in Safari froze my Hackintosh, so deeply that even the Magic Touchpad 2 doesn’t work (no click).

In Chrome - OK.

In Safari on MacBook Pro Retina 2014 - OK.

What does it mean?

you need to try different shiki values until you find the correct one.

there are universal DRM problems at the moment caused by Catalina and this is affecting real Mac users too. We call it DRMGATE here and there’s not a lot you can do about it at the moment tbh but also most people bar anybody using a Polaris gpu can get it too work. It’s not your fault or my fault or the EFIs fault but it’s something that Apple and or WEG need to fix.

Use this chart to try different values.

https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.Chart.md

Sharkus · January 9, 2020

5 hours ago, skinhorserame said:

Сlicking on this link in Safari froze my Hackintosh, so deeply that even the Magic Touchpad 2 doesn’t work (no click).

In Chrome - OK.

In Safari on MacBook Pro Retina 2014 - OK.

What does it mean?

One more comment regarding https://bitmovin.com/demos/drm. Google (Chrome) and Apple (Safari) use different DRM implementations. So, that link will use FairPlay DRM when using Safari and Widevine when using Chrome. That makes it a good test to see if the different DRMs are working in your system.

So, your system seems to be the same as mine. Widevine is working under Chrome, but FairPlay is not working with Safari. Unfortunately, Amazon Prime Video will not play 1080p content with Widevine, which is why it would be nice to get Safari working with FairPlay.

4 hours ago, AudioGod said:

you need to try different shiki values until you find the correct one.

there are universal DRM problems at the moment caused by Catalina and this is affecting real Mac users too. We call it DRMGATE here and there’s not a lot you can do about it at the moment tbh but also most people bar anybody using a Polaris gpu can get it too work. It’s not your fault or my fault or the EFIs fault but it’s something that Apple and or WEG need to fix.

Use this chart to try different values.

https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.Chart.md

~~I'll give a Shiki value of 128 a shot (but I'm not all that hopeful).~~ With shikigva=128 Amazon Prime returns an error instead of crashing the page, but still doesn't work. FairPlay test page doesn't show any video as before. Also Itune/AppleTV app won't play purchased videos, so looks like I'm going back to 80 and will revisit if/when things get updated.

-Marcus

Edited January 9, 2020 by Sharkus

sapgv · January 9, 2020

Hello

My hardware is

z390 aorus pro wifi bios F11

i5 9600k

2x8 GSkill 3200 GVKB

Samsung 860 Evo 1Tb

GPU XFX 5700 XT Thick III

Monitor Samsung c27jg54qqi (2K resolution). The HDMI cable is plugged in port hdmi2.

Thank you for awesome tutorial!

I have 1 small issue. My monitor has 2K resolution and 144 refresh rate. Plugged in by HDMI.

The issue is when I reboot the PC, it lost HDMI signal and does not show the clover properly. And when I switch input hdmi port at the monitor (switch by button, not plugged off the cable) to hdmi 1 and then switch back to hdmi 2 the PC now can see clover again.

What I'm doing wrong ? It seems that display does not wake up.

Yestarday I had noticed that if I connect PC to 4K TV (55' Sony 100Hz refresh rate) it works perfectly. Also if I connect to display in port HDMI 1 (the low refresh rate 60Hz port without FreeSync) it also works perfect.

So the issue cause only when I connect to display in port HDMI 2 with 144 Hz refresh rate.

Need to try the display port cable.

Edited January 10, 2020 by sapgv

Atomicman · January 9, 2020

Thanks AudioGod and GlasGood für these perfect tutorials!

As i was always struggling with a full functioning MacOS, I switched to the Z390 Pro Mainboard, and everything works just flawless, except for 1 thing:

I am using a RX5700XT connected with Displayport to a LG 4K Display and i cannot control the audio level. Is there some workaround?

Thanks

WizeMan · January 9, 2020

9 hours ago, Sharkus said:

One more comment regarding https://bitmovin.com/demos/drm. Google (Chrome) and Apple (Safari) use different DRM implementations. So, that link will use FairPlay DRM when using Safari and Widevine when using Chrome. That makes it a good test to see if the different DRMs are working in your system.

So, your system seems to be the same as mine. Widevine is working under Chrome, but FairPlay is not working with Safari. Unfortunately, Amazon Prime Video will not play 1080p content with Widevine, which is why it would be nice to get Safari working with FairPlay.

~~I'll give a Shiki value of 128 a shot (but I'm not all that hopeful).~~ With shikigva=128 Amazon Prime returns an error instead of crashing the page, but still doesn't work. FairPlay test page doesn't show any video as before. Also Itune/AppleTV app won't play purchased videos, so looks like I'm going back to 80 and will revisit if/when things get updated.

-Marcus

On 1/8/2020 at 6:14 AM, Sharkus said:

Sweet and congrats! I'm loving my system so far.

Have you tried Amazon Prime Video under Safari? Can you see if you can decode the following DRM protected video using Safari on the following page: https://bitmovin.com/demos/drm

-Marcus

I have done multiple exercises on Multiple SMBIOS's and EFIs for our builds as I had a Sapphire RX 580 Pulse 8GB and I just bought a Radeon Vega 56 two days ago.

To save you all some time (and keep @AudioGod from having to answer multiple times about DRMGate) I am posting the report:

The Verdict for macOS Catalina (10.15.2) with latest Lilu (1.4.1) + WhateverGreen (1.3.6 - latest commit 79398ee) pulled from the master branch is:

Polaris Cards (e.g. Radeon RX580):

The only thing you can get is Apple TV(+). Netflix and Prime Video as well as other DRM protected content does not work on Safari. You can try other browsers like Chrome or Firefox where you will be able to watch, but the resolution is not Full HD.

To get Apple TV(+) you need SMBIOS iMac19,1 (@AudioGod's latest RX Polaris EFI is perfect) and instead of shikigva=80 use:

shikigva=32 shiki-id=Mac-7BA5B2D9E42DDD94

You will have Apple TV(+) working and NO CRASHES when trying to play DRM content on Safari. It will just not play, it won't crash.

Navi & Vega Cards (e.g. RX 5700XT, Vega 56, Vega 64):

There are two different routes you can go:

Use SMBIOS iMac19,1 (the latest and greatest by @AudioGod is perfect) and leave shikigva=80 boot argument as is. This way you'll have Apple TV(+) AND Netflix on Safari. Amazon Prime does not work (the webpage reloads on a loop saying there was a problem) nor other DRM test streams (e.g. the BitMovin) which is a bummer but WEG development is in a good way and I think our patience and the developer's hard work will give fruits sooner or later.
Use SMBIOS iMacPro1,1 (the last iMacPro1,1 EFI by @AudioGod is perfect even if it is not using ocQuirks but you can also get @AudioGod's latest iMac19,1 EFI and change the SMBIOS information and remove the shikigva boot flags using Clover Configurator) and disable your iGPU. You will have Apple TV(+), Netflix and Amazon Prime Video working on Safari in HD, but:
- SMBIOS iMacPro1,1 is not the Perfect match for our hardware and Power Management is not close to Coffee Lake CPU as the iMacPro1,1 is packing a XEON
- You lose SideCar (which might not be that big of a deal, but it is noteworthy)
- Other DRM test streams still not work (e.g. BitMovin Demo or EzDRM) which means it is not as perfect as it seems.

Edited January 9, 2020 by WizeMan

hungrywallet · January 9, 2020

4 minutes ago, WizeMan said:

Great breakdown! Thanks for typing this up.

AudioGod · January 9, 2020

@WizeMan Thanks for that buddy, that will stop DRMGATE for a few days but that’s all it will do because people can’t let it go...lol

i guarantee that by the end of the week and when the post is lost in a sea of posts it will come up again.

I have a real Mac (19,1) in the office that has the exact same problem so get off the subject people and just except that under various smbios it’s broken until Apple and or WEG fixes it.
I don’t believe that even 5% of the people trying to make it Work are ever going to watch prime or Netflix on it anyway. It’s your TV, Tablet or your phone so what’s the big deal? I don’t get it,,,,, :hysterical:

It’s 7.30am and I’ve just woken up and feel I need too take a minutes time out from my break/work in Vegas/CES to make this post as I can’t believe DRMGATE has reappeared on the thread again. yikes!!!! :frantics:

Edited January 9, 2020 by AudioGod

hungrywallet · January 9, 2020

Funny you say that. I was so invested in having Netflix work in Safari yet the last time I watched Netflix on my PC was probably back in the mid 2000s...lol Also, I don't even use Safari. :hysterical:

Tiem · January 10, 2020

Sometimes it's just about knowing everything is working. I sleep better knowing things work, whether I use them or not.

WizeMan · January 10, 2020

I'd like to report that the latest (Jan 3) iMac19,1 Vega / NAVI EFI with the MemoryAllocation.efi has been giving me quite the issues.

Bluetooth devices (mouse / keyboard) were disconnecting and the computer needed reboot, also it occurred a couple of times that after bluetooth devices disconnected, the external USB drive I have connected for Time Machine force ejected and then the screen went black. I had to long press the power button to shut down the computer and switch it on again.

I reverted back to the 17/12/2019 ocQuirks Vega / NAVI EFI (just replaced Lilu + WEG to the latest master) and it seems to be stable now.

@AudioGod If there is something you need me to test in order to improve the newest version let me know. I' ll be glad to help.

Edited January 10, 2020 by WizeMan

AudioGod · January 10, 2020

3 hours ago, WizeMan said:

I'd like to report that the latest (Jan 3) iMac19,1 Vega / NAVI EFI with the MemoryAllocation.efi has been giving me quite the issues.

Bluetooth devices (mouse / keyboard) were disconnecting and the computer needed reboot, also it occurred a couple of times that after bluetooth devices disconnected, the external USB drive I have connected for Time Machine force ejected and then the screen went black. I had to long press the power button to shut down the computer and switch it on again.

I reverted back to the 17/12/2019 ocQuirks Vega / NAVI EFI (just replaced Lilu + WEG to the latest master) and it seems to be stable now.

@AudioGod If there is something you need me to test in order to improve the newest version let me know. I' ll be glad to help.

@WizeMan try the latest EFI again but this time replace OcQuirks and runtimeservices with the files below, restart and try again.

That should fix it for you. Fingers crossed.

OcQuirks R12.zip

One other thing bud, when you update clover make sure you don’t update any of the .efi drivers.

Edited January 10, 2020 by AudioGod

WizeMan · January 10, 2020

10 minutes ago, AudioGod said:

@WizeMan try the latest EFI again but this time replace OcQuirks and runtimeservices with the files below, restart and try again.

That should fix it for you. Fingers crossed.

OcQuirks R12.zip

One other thing bud, when you update clover make sure you don’t update any of the .efi drivers.

I’ve never updated clover by myself on your EFIs I’ll try tomorrow and report back

Neblogas · January 10, 2020

Every second restart the the machine reboots after apple logo. after rebooting get this notification:

Quote

Fri Jan 10 23:53:34 2020

*** Panic Report ***
panic(cpu 2 caller 0xffffff8001add9bd): Kernel trap at 0xffffff7f82e8fb67, type 0=divide error, registers:
CR0: 0x000000008001003b, CR2: 0x000000011a13f000, CR3: 0x0000000898551059, CR4: 0x00000000003626e0
RAX: 0x000000000009e000, RBX: 0xffffff83afcf32e0, RCX: 0xffffff7f82ee2e00, RDX: 0x0000000000000000
RSP: 0xffffff83afcf32c0, RBP: 0xffffff83afcf32d0, RSI: 0x0000000000000000, RDI: 0xffffff7f82ee2ed0
R8: 0xffffff8051f44d90, R9: 0xffffff7f82ee2f60, R10: 0x0000000000000004, R11: 0x0000000000000000
R12: 0xffffff83afcf331a, R13: 0xffffff8051f44d90, R14: 0xffffff83afcf3380, R15: 0xffffff83afcf32e0
RFL: 0x0000000000010246, RIP: 0xffffff7f82e8fb67, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000011a13f000, Error code: 0x0000000000000000, Fault CPU: 0x2, PL: 0, VF: 0

Backtrace (CPU 2), Frame : Return Address
0xffffff83afcf2d90 : 0xffffff80019b057d
0xffffff83afcf2de0 : 0xffffff8001aec065
0xffffff83afcf2e20 : 0xffffff8001add79a
0xffffff83afcf2e90 : 0xffffff800195d9d0
0xffffff83afcf2eb0 : 0xffffff80019aff97
0xffffff83afcf2fd0 : 0xffffff80019afde3
0xffffff83afcf3040 : 0xffffff8001add9bd
0xffffff83afcf31b0 : 0xffffff800195d9d0
0xffffff83afcf31d0 : 0xffffff7f82e8fb67
0xffffff83afcf32d0 : 0xffffff7f82e904ad
0xffffff83afcf3370 : 0xffffff7f82e8e97e
0xffffff83afcf33a0 : 0xffffff7f82e97464
0xffffff83afcf33d0 : 0xffffff7f82e7162b
0xffffff83afcf3410 : 0xffffff7f82e540d7
0xffffff83afcf3460 : 0xffffff7f82e535cf
0xffffff83afcf3490 : 0xffffff7f83065c89
0xffffff83afcf35e0 : 0xffffff7f8306c953
0xffffff83afcf3630 : 0xffffff7f82e123a3
0xffffff83afcf36d0 : 0xffffff7f82e2618a
0xffffff83afcf3730 : 0xffffff7f82e25df1
0xffffff83afcf37d0 : 0xffffff7f846ac4c9
0xffffff83afcf3850 : 0xffffff7f846aa0ef
0xffffff83afcf3980 : 0xffffff7f846a9c03
0xffffff83afcf39c0 : 0xffffff7f82a630a9
0xffffff83afcf3a00 : 0xffffff7f82a62f7e
0xffffff83afcf3a90 : 0xffffff8002085bb8
0xffffff83afcf3ae0 : 0xffffff7f82a6932e
0xffffff83afcf3b30 : 0xffffff800208f062
0xffffff83afcf3c70 : 0xffffff8001a984b6
0xffffff83afcf3d80 : 0xffffff80019b5dbc
0xffffff83afcf3dd0 : 0xffffff8001990b31
0xffffff83afcf3e50 : 0xffffff80019a524e
0xffffff83afcf3ef0 : 0xffffff8001ac36d7
0xffffff83afcf3fa0 : 0xffffff800195e1b6
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(530.68)[1F103EE4-D077-3317-AB2F-507B42ED1F26]@0xffffff7f82a48000->0xffffff7f82a93fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[F2C92761-0D41-3490-9646-0C34293AD6DB]@0xffffff7f82295000
com.apple.kext.AMDSupport(2.1.1)[0550C4FD-4313-3F08-A54C-EE7D16729566]@0xffffff7f82dff000->0xffffff7f83000fff
dependency: com.apple.iokit.IOACPIFamily(1.4)[47501A6D-5033-32B8-BA49-9D894BB04C85]@0xffffff7f828a3000
dependency: com.apple.iokit.IOPCIFamily(2.9)[F2C92761-0D41-3490-9646-0C34293AD6DB]@0xffffff7f82295000
dependency: com.apple.iokit.IOGraphicsFamily(530.68)[1F103EE4-D077-3317-AB2F-507B42ED1F26]@0xffffff7f82a48000
dependency: com.apple.AppleGraphicsDeviceControl(3.50.14)[60670750-555B-3405-BB3C-79F2C304DB06]@0xffffff7f82d8f000
com.apple.kext.AMD9500Controller(2.1.1)[01BB53A5-A201-3D78-A44F-F50942DFFAF8]@0xffffff7f83020000->0xffffff7f83096fff
dependency: com.apple.iokit.IOACPIFamily(1.4)[47501A6D-5033-32B8-BA49-9D894BB04C85]@0xffffff7f828a3000
dependency: com.apple.iokit.IOPCIFamily(2.9)[F2C92761-0D41-3490-9646-0C34293AD6DB]@0xffffff7f82295000
dependency: com.apple.kext.AMDSupport(2.1.1)[0550C4FD-4313-3F08-A54C-EE7D16729566]@0xffffff7f82dff000
dependency: com.apple.iokit.IOGraphicsFamily(530.68)[1F103EE4-D077-3317-AB2F-507B42ED1F26]@0xffffff7f82a48000
dependency: com.apple.AppleGraphicsDeviceControl(3.50.14)[60670750-555B-3405-BB3C-79F2C304DB06]@0xffffff7f82d8f000
com.apple.kext.AMDFramebuffer(2.1.1)[743EB461-A998-3F30-9D4B-E7BAD9E19429]@0xffffff7f846a3000->0xffffff7f846ccfff
dependency: com.apple.iokit.IOACPIFamily(1.4)[47501A6D-5033-32B8-BA49-9D894BB04C85]@0xffffff7f828a3000
dependency: com.apple.iokit.IOPCIFamily(2.9)[F2C92761-0D41-3490-9646-0C34293AD6DB]@0xffffff7f82295000
dependency: com.apple.kext.AMDSupport(2.1.1)[0550C4FD-4313-3F08-A54C-EE7D16729566]@0xffffff7f82dff000
dependency: com.apple.iokit.IOGraphicsFamily(530.68)[1F103EE4-D077-3317-AB2F-507B42ED1F26]@0xffffff7f82a48000

BSD process name corresponding to current thread: WindowServer
Boot args: dart=0 darkwake=8 shikigva=80

Mac OS version:
18G2022

Kernel version:
Darwin Kernel Version 18.7.0: Sun Dec 1 18:59:03 PST 2019; root:xnu-4903.278.19~1/RELEASE_X86_64
Kernel UUID: BC166F11-DD33-32AF-AF67-DE0B2C985AA8
Kernel slide: 0x0000000001600000
Kernel text base: 0xffffff8001800000
__HIB text base: 0xffffff8001700000
System model name: iMac19,1 (Mac-AA95B1DDAB278B95)

System uptime in nanoseconds: 9404678088
last loaded kext at 7285621306: com.apple.fileutil 20.036.15 (addr 0xffffff7f82ae3000, size 114688)
loaded kexts:

EOF
Model: iMac19,1, BootROM 1037.60.50.0.0, 8 processors, Intel Core i7, 3,6 GHz, 32 GB, SMC 2.46f12
Graphics: Radeon RX 580, Radeon RX 580, spdisplays_pcie_device, 8 GB

AudioGod · January 10, 2020

@Neblogas

replace OcQuirks and runtimeservices with the files below (They are in the UEFI driver folder in the EFI) restart and try again.

Let me know if it fixes it for you bud?

OcQuirks R12.zip

Neblogas · January 10, 2020

19 minutes ago, AudioGod said:

@Neblogas

replace OcQuirks and runtimeservices with the files below (They are in the UEFI driver folder in the EFI) restart and try again.

Let me know if it fixes it for you bud?

OcQuirks R12.zip

Thanks,

gonna test for some time.

AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites