WizeMan Posted January 11, 2020 Share Posted January 11, 2020 (edited) 15 hours ago, AudioGod said: @WizeMan try the latest EFI again but this time replace OcQuirks and runtimeservices with the files below, restart and try again. That should fix it for you. Fingers crossed. OcQuirks R12.zip One other thing bud, when you update clover make sure you don’t update any of the .efi drivers. @AudioGod I did all this and unfortunately it did not help. Not 5 minutes since I booted my bluetooth devices (mouse & keyboard) disconnected. Had to connect a usb mouse to restart the computer. Edited January 11, 2020 by WizeMan Link to comment Share on other sites More sharing options...
c1ru Posted January 11, 2020 Share Posted January 11, 2020 Thank you @AudioGod for your help! I have Z390 I Aorus pro wifi working awesome with your EFI, and with the patch also sleep. What should i do right now to test? Do you tell me in the other thread isn´t required to do a USBMap, i have all ports working yes. The only thing is that take near a 40seconds to get to desktop, but got bluetooth with Belkin, and sound, ethernet... and so fast! Link to comment Share on other sites More sharing options...
mazagngy Posted January 11, 2020 Share Posted January 11, 2020 (edited) 1 hour ago, c1ru said: Thank you @AudioGod for your help! I have Z390 I Aorus pro wifi working awesome with your EFI, and with the patch also sleep. What should i do right now to test? Do you tell me in the other thread isn´t required to do a USBMap, i have all ports working yes. The only thing is that take near a 40seconds to get to desktop, but got bluetooth with Belkin, and sound, ethernet... and so fast! I have the same motherboard and im using this efi 19,1 Aorus Z390 Pro RX Polaris EFI.zip 3/1/2020 i cant get Bluetooth to work and im using igpu uhd 630 because my gpu is rtx 2070 my issue is when i press sleep from apple menu it take a minute to sleep and when i press anything to wake the pc the screen become green and mouse arrow i can move it nothing else i must restart it to work properly . can you or anyone else to make the internal Bluetooth working and fixing my sleep/wake issue please just for more details my setup z390 aorus pro wifi bios f11 bios setting like OP but booting using internal gpu mac on samsung ssd 860 win on nvme samsung 1tb Gpu rtx 2070 i used Hackintool to buffer patch my uhd 630 to make it fully working nothing else modified i used older efi from this op while setup 10.15 and my Bluetooth worked without any problems but with last efi it doesn’t and i don’t remember the old efi i used now im on 10.15.2 and i my issue like i said before up sorry for my English and hope someone help me thanks Edited January 11, 2020 by mazagngy Link to comment Share on other sites More sharing options...
AudioGod Posted January 11, 2020 Author Share Posted January 11, 2020 (edited) 3 hours ago, WizeMan said: @AudioGod I did all this and unfortunately it did not help. Not 5 minutes since I booted my bluetooth devices (mouse & keyboard) disconnected. Had to connect a usb mouse to restart the computer. im really a bit baffled bro because I haven’t touched anything to do with that side of the EFI so it should be working as per normal. Could you try dropping memoryallocation.efi in the drivers for me please so I can see if that’s the cause for you? most people are happy and working but there are 3 of you that ain’t. Here’s the thing though one is fixed because he needed a fresh boot, the second is unrelated to your problem and I think we have to the bottom of it so I’m miffed over this one. lets see if we can find the root of the problem. 46 minutes ago, mazagngy said: I have the same motherboard and im using this efi 19,1 Aorus Z390 Pro RX Polaris EFI.zip 3/1/2020 i cant get Bluetooth to work and im using igpu uhd 630 because my gpu is rtx 2070 my issue is when i press sleep from apple menu it take a minute to sleep and when i press anything to wake the pc the screen become green and mouse arrow i can move it nothing else i must restart it to work properly . can you or anyone else to make the internal Bluetooth working and fixing my sleep/wake issue please just for more details my setup z390 aorus pro wifi bios f11 bios setting like OP but booting using internal gpu mac on samsung ssd 860 win on nvme samsung 1tb Gpu rtx 2070 i used Hackintool to buffer patch my uhd 630 to make it fully working nothing else modified i used older efi from this op while setup 10.15 and my Bluetooth worked without any problems but with last efi it doesn’t and i don’t remember the old efi i used now im on 10.15.2 and i my issue like i said before up sorry for my English and hope someone help me thanks what Bluetooth and WiFi combo card are you trying to use? if your trying to use the pros built in Bluetooth then forget it as it’s totally incompatible. disable via the bios and buy yourself a recommended pcie WiFi/Bluetooth combo. if it’s taking to long to boot then you might of done the hd630 patching wrong so double check it buddy. the green screen is a separate problem where Catalina is attempting to send the wrong colour mode to your monitor. This happens mostly with dell screens but can happen to other makes too, the fix is to force RGB to the screen. heres a link to a guide for fixing it pal.. https://spin.atomicobject.com/2018/08/24/macbook-pro-external-monitor-display-problem/ Edited January 11, 2020 by AudioGod Link to comment Share on other sites More sharing options...
WizeMan Posted January 11, 2020 Share Posted January 11, 2020 3 minutes ago, AudioGod said: im really a bit baffled bro because I haven’t touched anything to do with that side of the EFI so it should be working as per normal. Could you try dropping memoryallocation.efi in the drivers for me please so I can see if that’s the cause for you? most people are happy and working but there are 3 of you that ain’t. Here’s the thing though one is fixed because he needed a fresh boot, the second is unrelated to your problem and I think we have to the bottom of it so I’m miffed over this one. lets see if we can find the root of the problem. Dropping as in deleting? I tried that before I revert to Dec 17 EFI but wasn’t able to load macOS. I will try again though, by resetting NVRAM first and I’ll let you know. Link to comment Share on other sites More sharing options...
AudioGod Posted January 11, 2020 Author Share Posted January 11, 2020 4 minutes ago, WizeMan said: Dropping as in deleting? I tried that before I revert to Dec 17 EFI but wasn’t able to load macOS. I will try again though, by resetting NVRAM first and I’ll let you know. Yes drop as in delete it out of the EFI as a test. im just trying to track down the cause. Link to comment Share on other sites More sharing options...
mazagngy Posted January 11, 2020 Share Posted January 11, 2020 14 minutes ago, AudioGod said: im really a bit baffled bro because I haven’t touched anything to do with that side of the EFI so it should be working as per normal. Could you try dropping memoryallocation.efi in the drivers for me please so I can see if that’s the cause for you? most people are happy and working but there are 3 of you that ain’t. Here’s the thing though one is fixed because he needed a fresh boot, the second is unrelated to your problem and I think we have to the bottom of it so I’m miffed over this one. lets see if we can find the root of the problem. what Bluetooth and WiFi combo card are you trying to use? if your trying to use the pros built in Bluetooth then forget it as it’s totally incompatible. disable via the bios and buy yourself a recommended pcie WiFi/Bluetooth combo. if it’s taking to long to boot then you might of done the hd630 patching wrong so double check it buddy. the green screen is a separate problem where Catalina is attempting to send the wrong colour mode to your monitor. This happens mostly with dell screens but can happen to other makes too, the fix is to force RGB to the screen. heres a link to a guide for fixing it pal.. https://spin.atomicobject.com/2018/08/24/macbook-pro-external-monitor-display-problem/ Thank you for fast reply i used pros Bluetooth while using 10.15 with older efi from this thread and it worked without any issues i saw a tut how to make it work but it said i must enable hs14 and i dont know how . My system boot up in 10 sec thanks to your efi i dont have any problem with uhd 630 i used a preset for aorus master In Hackintool and its work but in about this mac it said intel uhd 630 mobile i dont know if this ok or not . and is that ok it take a minute to go to sleep and by the way i cant make it sleep or shutdown by pressing power bottom for the green screen i will follow ur link thanks for your kind 1 Link to comment Share on other sites More sharing options...
AudioGod Posted January 11, 2020 Author Share Posted January 11, 2020 (edited) 38 minutes ago, mazagngy said: Thank you for fast reply i used pros Bluetooth while using 10.15 with older efi from this thread and it worked without any issues i saw a tut how to make it work but it said i must enable hs14 and i dont know how . My system boot up in 10 sec thanks to your efi i dont have any problem with uhd 630 i used a preset for aorus master In Hackintool and its work but in about this mac it said intel uhd 630 mobile i dont know if this ok or not . and is that ok it take a minute to go to sleep and by the way i cant make it sleep or shutdown by pressing power bottom for the green screen i will follow ur link thanks for your kind don’t use the masters Bluetooth and WiFi card bro, get a new pcie one, where you might h able to get it to work it’s still gonna cause problems for you. @mazagngy are you using the EFI from this thread or my Z390 Master thread? if you using the EFI from here then start again using my Z390 Master EFI that you can find on my Z390 Master thread here. Edited January 11, 2020 by AudioGod Link to comment Share on other sites More sharing options...
c1ru Posted January 11, 2020 Share Posted January 11, 2020 (edited) 47 minutes ago, AudioGod said: don’t use the masters Bluetooth and WiFi card bro, get a new pcie one, where you might h able to get it to work it’s still gonna cause problems for you. @mazagngy are you using the EFI from this thread or my Z390 Master thread? if you using the EFI from here then start again using my Z390 Master EFI that you can find on my Z390 Master thread here. Im using all our setup and works awesome, but I have a question, what can I do to enter in bios? after boot my machine I see the logo and nothing more until reach the desktop login. Also if I press f2 to enter in bios I see black screen. The only issue is when wakeup from sleep I need to replug my welkin usb to get bluetooth working again. Also, can I delete all of this patch below than 10.15? Edited January 11, 2020 by c1ru Link to comment Share on other sites More sharing options...
mazagngy Posted January 11, 2020 Share Posted January 11, 2020 37 minutes ago, AudioGod said: don’t use the masters Bluetooth and WiFi card bro, get a new pcie one, where you might h able to get it to work it’s still gonna cause problems for you. @mazagngy are you using the EFI from this thread or my Z390 Master thread? if you using the EFI from here then start again using my Z390 Master EFI that you can find on my Z390 Master thread here. I dont need wifi to work i just need the Bluetooth and it worked before with 10.15 without problems using your your old efi (i dont know which one) and i see no need for buy a pci wifi/bt just for working bt if the built in one worked without problem I follow this thread https://www.tonymacx86.com/threads/designare-z390-intel-cnvi-9560-bluetooth-partial-success.278116/ but i dont know how to enable HS14 this is all i need so please tell me how to enable hs14 or if u can give me ssdt with hs14 enabled and my motherboard is z390 aorus pro wifi not master Link to comment Share on other sites More sharing options...
AudioGod Posted January 11, 2020 Author Share Posted January 11, 2020 (edited) 13 minutes ago, mazagngy said: I dont need wifi to work i just need the Bluetooth and it worked before with 10.15 without problems using your your old efi (i dont know which one) and i see no need for buy a pci wifi/bt just for working bt if the built in one worked without problem I follow this thread https://www.tonymacx86.com/threads/designare-z390-intel-cnvi-9560-bluetooth-partial-success.278116/ but i dont know how to enable HS14 this is all i need so please tell me how to enable hs14 or if u can give me ssdt with hs14 enabled and my motherboard is z390 aorus pro wifi not master hs14 is disabled via the dsdt as standard would need to edit the dsdt to enable it fully. just to add my 2 pence here, I disagree with the above method as where it does work your also creating problems for the kernel. I totally don’t advise what your doing, it won’t break anything but like I said above it creates problems. Your machine and your choices bud but my advise stands the same as before. 16 minutes ago, c1ru said: Im using all our setup and works awesome, but I have a question, what can I do to enter in bios? after boot my machine I see the logo and nothing more until reach the desktop login. Also if I press f2 to enter in bios I see black screen. The only issue is when wakeup from sleep I need to replug my welkin usb to get bluetooth working again. Also, can I delete all of this patch below than 10.15? don’t remove anything like that from my EFI Buddy. It’s not used if it’s not needed but just leave it be to be safe. Edited January 11, 2020 by AudioGod 1 Link to comment Share on other sites More sharing options...
c1ru Posted January 11, 2020 Share Posted January 11, 2020 7 minutes ago, mazagngy said: I dont need wifi to work i just need the Bluetooth and it worked before with 10.15 without problems using your your old efi (i dont know which one) and i see no need for buy a pci wifi/bt just for working bt if the built in one worked without problem I follow this thread https://www.tonymacx86.com/threads/designare-z390-intel-cnvi-9560-bluetooth-partial-success.278116/ but i dont know how to enable HS14 this is all i need so please tell me how to enable hs14 or if u can give me ssdt with hs14 enabled and my motherboard is z390 aorus pro wifi not master I think you can add an argument inside clover with uia_include=hs14 but wait for an expert to tell you. 1 Link to comment Share on other sites More sharing options...
AudioGod Posted January 11, 2020 Author Share Posted January 11, 2020 Just now, c1ru said: I think you can add an argument inside clover with uia_include=hs14 but wait for an expert to tell you. yeah that might work as it goes, you can try that but the dsdt may not allow it so you may still need to edit it. Link to comment Share on other sites More sharing options...
mazagngy Posted January 11, 2020 Share Posted January 11, 2020 3 minutes ago, c1ru said: I think you can add an argument inside clover with uia_include=hs14 but wait for an expert to tell you. 6 minutes ago, AudioGod said: hs14 is disabled via the dsdt as standard would need to edit the dsdt to enable it fully Thanks for both of you guys and im really sorry for keep asking im just new to Hackintosh but i learn fast so can anyone of you tell me how to edit the dsdt to enable hs14 if possible Link to comment Share on other sites More sharing options...
AudioGod Posted January 11, 2020 Author Share Posted January 11, 2020 (edited) 11 minutes ago, mazagngy said: Thanks for both of you guys and im really sorry for keep asking im just new to Hackintosh but i learn fast so can anyone of you tell me how to edit the dsdt to enable hs14 if possible no problem bud, I’m here to help where I can and most people on here are super friendly and will help where they can too. if you ask @texem nicely and he’s not busy he might be able to do it for you. otherwise MaLD0n. try doing what @c1ru suggested first of all and see if it works for you. Edited January 11, 2020 by AudioGod 1 1 Link to comment Share on other sites More sharing options...
AudioGod Posted January 11, 2020 Author Share Posted January 11, 2020 @WizeMan Any progress bud? 2 Link to comment Share on other sites More sharing options...
c1ru Posted January 11, 2020 Share Posted January 11, 2020 9 minutes ago, AudioGod said: @WizeMan Any progress bud? I wish you a very happy new 2020, your support is awesome @AudioGod! Link to comment Share on other sites More sharing options...
AudioGod Posted January 11, 2020 Author Share Posted January 11, 2020 Just now, c1ru said: I wish you a very happy new 2020, your support is awesome @AudioGod! your welcome, and the same too you good buddy. 2 Link to comment Share on other sites More sharing options...
c1ru Posted January 11, 2020 Share Posted January 11, 2020 4 minutes ago, AudioGod said: your welcome, and the same too you good buddy. Can I change VirtualSMC inside kext-other to fakesmc in order to use hardware monitor? Link to comment Share on other sites More sharing options...
AudioGod Posted January 11, 2020 Author Share Posted January 11, 2020 (edited) 2 minutes ago, c1ru said: Can I change VirtualSMC inside kext-other to fakesmc in order to use hardware monitor? You can but I wouldn’t personally. You can install the additional kexts needed for virtualsmc to make it work too. download the latest version of VirtualSMC and take the additional kexts from it you need to make hardware monitor work. Edited January 11, 2020 by AudioGod 1 Link to comment Share on other sites More sharing options...
WizeMan Posted January 11, 2020 Share Posted January 11, 2020 (edited) 1 hour ago, AudioGod said: @WizeMan Any progress bud? Hey mate, I haven’t tested it yet as I have a deadline for an iOS app and interrupting my flow will kick me out of “the zone” If my mind is clear tonight I’ll try if not I’ll try tomorrow early in the morning (Greece time) and report back. Needless to say that your support and personal effort on this thread is out of this world! Thank you @AudioGod Edited January 11, 2020 by WizeMan 1 Link to comment Share on other sites More sharing options...
AudioGod Posted January 11, 2020 Author Share Posted January 11, 2020 2 minutes ago, WizeMan said: Hey mate, I haven’t tested it yet as I have a deadline for an iOS app and interrupting my flow will kick me out of “the zone” If my mind is clear tonight I’ll try if not I’ll try tomorrow early in the morning (Greece time) and report back. Needless to say that your support and personal effort on this thread is out of this world! Thank you @AudioGod no problem buddy, whenever you get around to it just let me know. could also be clover so update it only selecting the first two options On a custom install when doing so. il screenshot it when I’m on my hack next to show you. Link to comment Share on other sites More sharing options...
WizeMan Posted January 11, 2020 Share Posted January 11, 2020 17 minutes ago, AudioGod said: no problem buddy, whenever you get around to it just let me know. could also be clover so update it only selecting the first two options On a custom install when doing so. il screenshot it when I’m on my hack next to show you. Fab! Thank you! Link to comment Share on other sites More sharing options...
c1ru Posted January 11, 2020 Share Posted January 11, 2020 1 hour ago, WizeMan said: Hey mate, I haven’t tested it yet as I have a deadline for an iOS app and interrupting my flow will kick me out of “the zone” If my mind is clear tonight I’ll try if not I’ll try tomorrow early in the morning (Greece time) and report back. Needless to say that your support and personal effort on this thread is out of this world! Thank you @AudioGod Do you send apps with a hackintosh ? I send it latest update with my hackintosh without issue, but I don’t know I have save my serial number from this time. Link to comment Share on other sites More sharing options...
WizeMan Posted January 11, 2020 Share Posted January 11, 2020 (edited) 3 minutes ago, c1ru said: Do you send apps with a hackintosh ? I send it latest update with my hackintosh without issue, but I don’t know I have save my serial number from this time. Although where I work we distribute apps using automations on a Mac Mini server, I have also uploaded archives on the App Store successfully with my Hack. I don’t think that changing serial number on your hack will bring any issues to app distribution. Edited January 11, 2020 by WizeMan 1 Link to comment Share on other sites More sharing options...
Recommended Posts