larabee Posted November 19, 2019 Share Posted November 19, 2019 @gino8080 I used the same setup as yours. My monitor has 1 DP (hookup to nvidia for 144hz gsynz) and 1 HDMI (hookup to AMD), it auto detects the sources, and with AMD disabled in device manager in windows, the monitor automatically pickup signal from Nvidia card. Not sure if your monitor can do that. What's the price of 2080 in your area? It's a much better choice buying used 2080. Link to comment Share on other sites More sharing options...
seimen_x Posted November 19, 2019 Share Posted November 19, 2019 (edited) hey guys, thank you once again for the great Tutorial and the EFi Files. I have a similar setup, however when doing my Benchmarks I do not get over a multicore score higher than 6600. Others with an i7 processor seem to get a much higher result (check out this setup: https://www.tonymacx86.com/threads/success-pynty-mac-i7-8700-z390-i-aorus-pro-wifi-16gb-ram-sapphire-rx-580-mojave-10-14-3.271145/ which is almost the same). generally my Hackintosh feels laggy. Any advice for what could be the reason? Specs of my Setup: -Saphire radeon RX580 - 2 x 16GB G Skill Trident Z Ram DDr 4 at 3200 MHz (32 Gb total) - Samsung SSD 970 EVO Plus 1TB installed as NVMExpress - Aorus Z390 Pro - Intel Core I7-8700 - Corsair H60 cooler Any advice would be greatly appreciated. Thank you Simon config.plist Edited November 19, 2019 by seimen_x Link to comment Share on other sites More sharing options...
AudioGod Posted November 19, 2019 Author Share Posted November 19, 2019 (edited) 10 minutes ago, seimen_x said: hey guys, thank you once again for the great Tutorial and the EFi Files. I have a similar setup, however when doing my Benchmarks I do not get over a multicore score higher than 6600. Others with an i7 processor seem to get a much higher result (check out this setup: https://www.tonymacx86.com/threads/success-pynty-mac-i7-8700-z390-i-aorus-pro-wifi-16gb-ram-sapphire-rx-580-mojave-10-14-3.271145/ which is almost the same). generally my Hackintosh feels laggy. Any advice for what could be the reason? Specs of my Setup: -Saphire radeon RX580 - 2 x 16GB G Skill Trident Z Ram DDr 4 at 3200 MHz (32 Gb total) - Samsung SSD 970 EVO Plus 1TB installed as NVMExpress - Aorus Z390 Pro - Intel Core I7-8700 - Corsair H60 cooler Any advice would be greatly appreciated. Thank you Simon Hi, if your using a 8700 non k variant then the correct smbios you should be using is 19,2 or macpro1,1 give one of them a try with new details and that should help. also make sure your settings and z390 pro motherboard bios firmware is F11 and your using the bios settings per this guide. we have a bios profile that you can load into your motherboard that will give you all the correct settings and MSR Unlocked Edited November 19, 2019 by AudioGod Link to comment Share on other sites More sharing options...
seimen_x Posted November 19, 2019 Share Posted November 19, 2019 4 minutes ago, AudioGod said: Hi, if your using a 8700 non k variant then the correct smbios you should be using is 19,2 or macpro1,1 give one of them a try with new details and that should help. But I am using an 8700K variant (sorry I misspelled earlier) I tried anyways and still the same issue. Link to comment Share on other sites More sharing options...
AudioGod Posted November 19, 2019 Author Share Posted November 19, 2019 Just now, seimen_x said: But I am using an 8700K variant (sorry I misspelled earlier) I tried anyways and still the same issue. use the MacPro1,1 EFI attached to the guide and try again and make no changes to the EFI other then your new details. you can also send me a copy of your EFI and myself or @larabeewill check over it for you. your score on geekbench shouldn’t be low like that. @seimen_x do you have a windows partition that you can run geekbench on to make sure it’s not the system itself scoring low? Link to comment Share on other sites More sharing options...
seimen_x Posted November 19, 2019 Share Posted November 19, 2019 (edited) 12 minutes ago, AudioGod said: use the MacPro1,1 EFI attached to the guide and try again and make no changes to the EFI other then your new details. you can also send me a copy of your EFI and myself or @larabeewill check over it for you. your score on geekbench shouldn’t be low like that. Thank you for looking into it. uploaded it on my Evernote: https://www.evernote.com/shard/s342/sh/97206e93-f44c-4c23-8774-aed7da80075b/bba9fcebdea6342be56765b3b5731b02 thank you so much for your help! To clarify, what do you mean specifically by only changing my details? Are you referring to Serial No, and SMUUID? thank you EDIt 1_ just tested it again with the Mac Pro 1.1. EFI: Score is the same (see screenshot). Edited November 19, 2019 by seimen_x Link to comment Share on other sites More sharing options...
AudioGod Posted November 19, 2019 Author Share Posted November 19, 2019 @seimen_x what motherboard bios revision are you using? Link to comment Share on other sites More sharing options...
seimen_x Posted November 19, 2019 Share Posted November 19, 2019 Just now, AudioGod said: @seimen_x what motherboard bios revision are you using? F11, as described in your guide And I made sure I followed your bios Setup to the point Link to comment Share on other sites More sharing options...
AudioGod Posted November 19, 2019 Author Share Posted November 19, 2019 Do you have windows installed on a separate drive? if you do could you run geek bench via windows And make sure your scoring correct and it’s not a hardware fault? Link to comment Share on other sites More sharing options...
seimen_x Posted November 19, 2019 Share Posted November 19, 2019 Just now, AudioGod said: Do you have windows installed on a separate drive? if you do could you run geek bench via windows And make sure your scoring correct and it’s not a hardware fault? good idea, I will try that and update you Link to comment Share on other sites More sharing options...
AudioGod Posted November 19, 2019 Author Share Posted November 19, 2019 It could be throttling causing that. So check your cpu temp when under load too Link to comment Share on other sites More sharing options...
larabee Posted November 20, 2019 Share Posted November 20, 2019 (edited) 1 hour ago, seimen_x said: Score is the same (see screenshot). You are using Geekbench v 5.0 with new scores formula. Therefore, this is perfectly NORMAL. 100% fine. THey changed everything with the new version... 8700K gets around 1100-1200 and 9900K with default clock and voltage will get around 1350-1400 geek score 5.0 Edited November 20, 2019 by larabee 1 Link to comment Share on other sites More sharing options...
AudioGod Posted November 20, 2019 Author Share Posted November 20, 2019 6 minutes ago, larabee said: You are using Geekbench v 5.0 with new scores formula. Therefore, this is perfectly NORMAL. 100% fine. THey changed everything with the new version... 8700K gets around 1100-1200 and 9900K with default clock and voltage will get around 1350-1400 geek score 5.0 I had no idea, why they do that? 1 Link to comment Share on other sites More sharing options...
larabee Posted November 20, 2019 Share Posted November 20, 2019 @AudioGod Need to have new score because apple ARM series bench too high LOLz. 1 Link to comment Share on other sites More sharing options...
hungrywallet Posted November 20, 2019 Share Posted November 20, 2019 Seems like I can't get sidecar working on my new iPad. Installed one of these today thinking it would fix the issue. https://www.amazon.com/gp/product/B07VCCZS54/ Link to comment Share on other sites More sharing options...
larabee Posted November 20, 2019 Share Posted November 20, 2019 Just now, hungrywallet said: Seems like I can't get sidecar working on my new iPad. Installed one of these today thinking it would fix the issue. https://www.amazon.com/gp/product/B07VCCZS54/ Site tight and wait for new Whatevergreen and try again with iGPU enabled. @AudioGod is testing the new beta version too. Link to comment Share on other sites More sharing options...
hungrywallet Posted November 20, 2019 Share Posted November 20, 2019 8 minutes ago, larabee said: Site tight and wait for new Whatevergreen and try again with iGPU enabled. @AudioGod is testing the new beta version too. I compiled the latest version yesterday and I run with iGPU enabled on 19,1, but headless mode. Link to comment Share on other sites More sharing options...
hungrywallet Posted November 20, 2019 Share Posted November 20, 2019 3 hours ago, hungrywallet said: I compiled the latest version yesterday and I run with iGPU enabled on 19,1, but headless mode. Looks like sidecar only works for me when wired...Ughh. Link to comment Share on other sites More sharing options...
larabee Posted November 20, 2019 Share Posted November 20, 2019 18 minutes ago, hungrywallet said: Looks like sidecar only works for me when wired...Ughh. Which means wifi issues... try using the airport fix kext ? Link to comment Share on other sites More sharing options...
hungrywallet Posted November 20, 2019 Share Posted November 20, 2019 6 minutes ago, larabee said: Which means wifi issues... try using the airport fix kext ? Yeah, I'm figuring that. Will just return this wifi card and get $60 back. Is there a compatible wifi dongle? Rather use that than a card. Link to comment Share on other sites More sharing options...
larabee Posted November 20, 2019 Share Posted November 20, 2019 7 minutes ago, hungrywallet said: Yeah, I'm figuring that. Will just return this wifi card and get $60 back. Is there a compatible wifi dongle? Rather use that than a card. I'm using this one: https://www.aliexpress.com/item/32788764375.html?spm=a2g0s.9042311.0.0.2bf74c4dAdt8U8 Link to comment Share on other sites More sharing options...
iantong Posted November 20, 2019 Share Posted November 20, 2019 my computer: aorus z390 pro wifi , upgraded to F11 bios; 9900K; AMD 5700; 5K display with 2 DP lines ; BROADCOM BCM943602CS； still have problem: 1) instant wakeup; 2).audio, if I connect 2 dp lines, no sound via dp port, but microphone is ok;if i connect with 1 dp line, display audio is ok, but couldd not 5k display. when I chang to voodoohda, display audio is ok even with 2 dp lines, but the microphone could not work Link to comment Share on other sites More sharing options...
hungrywallet Posted November 20, 2019 Share Posted November 20, 2019 8 hours ago, larabee said: I'm using this one: https://www.aliexpress.com/item/32788764375.html?spm=a2g0s.9042311.0.0.2bf74c4dAdt8U8 I rather go with a usb dongle for aesthetics if possible. Link to comment Share on other sites More sharing options...
AudioGod Posted November 20, 2019 Author Share Posted November 20, 2019 Just now, hungrywallet said: I rather go with a usb dongle for aesthetics if possible. did you try using airportfixup.kext and the Broadcom fix kexts from the guide for your WiFi card buddy? BroadcomFix.zip Link to comment Share on other sites More sharing options...
hungrywallet Posted November 20, 2019 Share Posted November 20, 2019 3 hours ago, AudioGod said: did you try using airportfixup.kext and the Broadcom fix kexts from the guide for your WiFi card buddy? BroadcomFix.zip I haven't tried the Broadcomfix. I have tried the Airportfixup. I was under the impression I wouldn't need any additional kext with this card being that it's natively supported. Link to comment Share on other sites More sharing options...
Recommended Posts