scousi Posted January 30, 2008 Share Posted January 30, 2008 Hi _Prasys_ and All, I've been looking for the solution of WMP54G v.4.1 and I looked at the date to where you started fixing the drivers and its almost one year.. hehe.. I hope you still doing it.. We appreciate what you are doing.. Hope you we can hear from you soon.. Thanks! The fix involves setting the new ethernet mac address to the one of the USB dongle. In my case, when I create a new ethernet address, it uses the MAC address of my internal wired ethermet and the Network ipreference utility won't allow me to change the MAC address in the Ethernet tab in advanced options. EDIT: I got it working like this (Leo): Make your wired ethernet inactive from Network pref pane (press apply) in a terminal window: sudo ifconfig en1 up (en1 is my wifi) Create another ethernet interface (Chose the second ethernet in the drop down menu) Click apply and you should get an Ip address assigned tp yor wifi Good luck! Link to comment Share on other sites More sharing options...
LukeLuke Posted January 30, 2008 Share Posted January 30, 2008 hello, i have a EDIMAX EW-7318Ug . with this kext can i use the WPA/TKIP ??? I was trying but it is much unstable , and now it doesn't work from 10 hours..... What can i do ??? Link to comment Share on other sites More sharing options...
harbot Posted February 3, 2008 Share Posted February 3, 2008 Hello All; There is still an issue on my part the RT2500Replug doesnt work hahahahahaha i tried using the default setup from Prasys still same problem also I change PID and VID to point to my asus wl167 still dont work any idea? see dmesg output Initializing RT2500Replug res1 -- FR3068 RT2500Replug createWorkLoop 0x2f55300 RT2500Replug getWorkLoop RT2500Replug Probing score 109000 - 109000 -- Is first Run (378) -- score 109000 RT2500Replug Starting 0x2848600 - result 1 RT2500Replug setTimeoutMS result 0 RT2500Replug timeoutOccurred RT2500Replug rematching RT2500Replug ReEnumerateDevice RT2500Replug getWorkLoop RT2500Replug getWorkLoop RT2500Replug Stopping RT2500Replug Freeing remove Eventsource - Initializing RT2500Replug res1 -- FR378 RT2500Replug createWorkLoop 0x2d926c0 RT2500Replug getWorkLoop RT2500Replug Probing score 109000 - 109000 -- Is first Run (1678) -- score 109000 RT2500Replug Starting 0x2848600 - result 1 RT2500Replug setTimeoutMS result 0 RT2500Replug timeoutOccurred RT2500Replug rematching RT2500Replug ReEnumerateDevice RT2500Replug getWorkLoop RT2500Replug getWorkLoop RT2500Replug Stopping RT2500Replug Freeing remove Eventsource - Initializing RT2500Replug res1 -- FR1678 RT2500Replug createWorkLoop 0x284d1c0 RT2500Replug getWorkLoop RT2500Replug Probing score 109000 - 109000 -- Is Run-No 2 -- score 100 RT2500Replug Freeing remove Eventsource - RT2573USBWirelessDriver: Ethernet address 00:1d:60:65:77:75 Link to comment Share on other sites More sharing options...
=-Devin-= Posted February 3, 2008 Share Posted February 3, 2008 Will this work with WUSB54G v4 and make it recognized as Airport? If so, will I get the cool icon in the menu bar to connect, etc.? Link to comment Share on other sites More sharing options...
martijnb1974 Posted February 7, 2008 Share Posted February 7, 2008 Driver does not work in 10.5.1, it connects but gives no ip-address (kalyway). However, when making network address MANUAL in stead of DHCP, it works. Link to comment Share on other sites More sharing options...
attempts Posted February 9, 2008 Share Posted February 9, 2008 attempts - you made my day ^^ holy s*** it was so simple I'm writing this post from Leo with Safari! juppi du my mac life can begin muahaha ^^ greetz yeah! XD Link to comment Share on other sites More sharing options...
Careless Posted February 11, 2008 Share Posted February 11, 2008 anyone try a PCI version? I tried various bits and pieces from this driver and the RT2500 utility and such to get my PCI card working, but it locks the system up shortly after activating the card 10.4 drivers do that too. any leads? Link to comment Share on other sites More sharing options...
muitommy Posted February 12, 2008 Share Posted February 12, 2008 i wonder are there any update for the rt73 drivers or airport drivers that would cause constant kernel panic when using azerueus or transmissions ... Link to comment Share on other sites More sharing options...
carpao Posted February 13, 2008 Share Posted February 13, 2008 Driver does not work in 10.5.1, it connects but gives no ip-address (kalyway).However, when making network address MANUAL in stead of DHCP, it works. DHCP works for me... Kalyway 10.5.1 the only thing that I had to do after installing the driver... was to add the new ethernet "tab" to my location in the network preferences beacuse it was not present there... Link to comment Share on other sites More sharing options...
gauner Posted February 16, 2008 Share Posted February 16, 2008 what about 802.1x authentication? is it supported somehow with this driver? can't find an option to set it up.. Link to comment Share on other sites More sharing options...
QMax Posted February 16, 2008 Share Posted February 16, 2008 Not sure, but it seems I'm able now to have a stable WPA2-PSK connection between DWL-G122 and Asus router but... am I the only one who is not able to see shared folders on my LAN using wireless ? No problems using wired ethernet, I can see Windows shared folder and my NAS, but using G122 I can't see nothing... Max Link to comment Share on other sites More sharing options...
sama7896 Posted February 18, 2008 Share Posted February 18, 2008 How about using it as a axis point, what settings must i change in order to share my internet conection with other wi-fi devices ? I'm using WL 167G v2 Link to comment Share on other sites More sharing options...
Guest electro Posted February 21, 2008 Share Posted February 21, 2008 a have wifi USB Gigabyte GN-WB01GS WLAN on chip RT2571 WF more info product >> http://www.gigabyte.com.tw/Products/Commun...x?ProductID=989 producent GIGABYTE don't have driver for my device http://www.gigabyte.com.tw/Support/Communi...x?ProductID=989 I'm because install driver for mac osx "USB (RT257x/RT2671 for OS 10.3/10.4 ver. RT2571W :1.1.7.0 )" from http://www.ralinktech.com/ralink/Home/Support/Macintosh.html RTUSB%20D70-1.1.3.0%20D71W-1.1.7.0%20UI-1.3.0.0_2006_11_10.dmg "System Requirement: Mac OS X 10.3.X or 10.4.X Hardware Supported: Ralink RT71W chipset USB NIC Ralink RT70 chipset USB NIC Software Supported: For Mac OS X 10.4.X: USBWireless-10.4\USBWireless-Tiger.pkg" more info to pdf http://www.ralinktech.com.tw/data/Software..._2006_11_10.pdf and not woks on Zephyroth Leopard 10.5.2 AMD to "Zephyroth Leopard 10.5.2 AMD" new add suport : # WiFi : Ralink RT73 and RT2500 Leopard see me of my USB device's : producent : "Ralink" PID : "0x8008" VID : "0x1044" >>> Please help me! <<<<< Link to comment Share on other sites More sharing options...
hifiking Posted February 22, 2008 Share Posted February 22, 2008 Hi, is there a driver for the WMP54G v4.1 PCI out yet? Or any way to make it work at all? Thx Link to comment Share on other sites More sharing options...
Chris G. Posted February 23, 2008 Share Posted February 23, 2008 HOLY {censored}!! FINALLY! I have a 100% working hackintosh!!!! Thank you for your work on this soooo much. I have a Toshiba Satellite A105. I just went out and bought a Linksys WUSB54GC today. It works perfectly with these drivers! I couldn't be happier! Fricken awesome work. WPA works with DHCP. Awesome job and thanks again! Link to comment Share on other sites More sharing options...
majere Posted February 24, 2008 Share Posted February 24, 2008 Thanks for making it possible to use the WUSB54G. Got it working however after adding a profile for my AP, I'm not able to launch the utility anymore, it will just launch and stopped responding. It can only connect to the AP that I have configured in the profile. Any idea how do I remove the profile to get the utility working? Link to comment Share on other sites More sharing options...
spadge Posted February 25, 2008 Share Posted February 25, 2008 Hi, I installed this driver hoping it would work with my ralink RT2500 2500 PCMCIA card. However, I would like to uninstall the driver. What is the best way to do this? Thanks Spadge Link to comment Share on other sites More sharing options...
sama7896 Posted February 25, 2008 Share Posted February 25, 2008 About the WL 167-G .. it don't work on mac. BUT.. it works from a xp virtual machine on parallels desktop. I use it as a axis point from a parallels virtual xp. (make sure to uninstall the usbwirelessutility). Hope this helps someone. Link to comment Share on other sites More sharing options...
kae Posted February 26, 2008 Share Posted February 26, 2008 does anyone else get kernel panics using this in 10.5.1 kalyway? sometimes i can go for 2 days with nothing.. works fine, then sometimes, once every hour or so, bang, kernel panic. but it isnt being written into a panic.log ??? hardware - ga-p35-ds3p, e2160, dwl-g122, 2gb ram I have the same problem. BadAxe2, Kalyway 10.5.1, dwl-g122. Giving up on this and are looking for another 100% compatible adapter, anyone got a good tip ? Any pci-card that works ? Link to comment Share on other sites More sharing options...
Simon Lin Posted February 27, 2008 Share Posted February 27, 2008 Hello, I got a Buffalo WLI-U2-KG54(2A) USB Wireless Dongle, and I installed this driver, the wireless utility can find my AP, but I can't surf the web. The network part show nothing for my USB wireless dongle. Can you help me, thank you. Link to comment Share on other sites More sharing options...
MacSimizeDenver Posted February 28, 2008 Share Posted February 28, 2008 I've installed version 1.2 & 1.5 of prasys app. I've done the disk permissions repairing and deleted the Extensions.mkext, then rebooted both times. Now, if I start the app it's possible for me to start the app and get a connection to the router. My D-Link DWL-G122 is also listed correctly under the system profiler to 100%. When I start Safari, there is no connection to the internet. If I then start the network diagnostics, nothing is listed. all bulbs are red. Under networks in the system preferences there is only the internal modem and ethernet listed. Firewire connection disappear after the prasys app was started. WTF? How do I get connected to the internet? Have I forgot something? I'm running Kalyway 10.5.1 on the hardware from my signature. There are some problems with the repairing of the system permissions. Here is the text from the disk utility: Last login: Thu Feb 28 14:20:49 on console steve-wozniaks-mac-pro:~ woz$ sudo diskutil repairPermissions / Password: Started verify/repair permissions on disk disk0s1 Leo Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources/DiskManagementTool" has been modified and will not be repaired Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Resources/Locum" has been modified and will not be repaired Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner" has been modified and will not be repaired Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconfig" has been modified and will not be repaired Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writeconfig" has been modified and will not be repaired Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired Permissions differ on "usr/X11/lib/libX11.6.dylib", should be -rwxr-xr-x , they are lrwxr-xr-x Permissions differ on "usr/X11/lib/libX11.6.2.0.dylib", should be lrwxr-xr-x , they are -rwxr-xr-x [ + 0%..10%..20%..30%..40%..50%..60%..70%..80%..90%..100% ] Finished verify/repair permissions on disk disk0s1 Leo steve-wozniaks-mac-pro:~ woz$ Anyone who could help me with this? Link to comment Share on other sites More sharing options...
kae Posted February 29, 2008 Share Posted February 29, 2008 In the System configuration/Network, I added a new connection (+ sign down on the left) and selected the second ethernet. Thats how I got it to work. Link to comment Share on other sites More sharing options...
JaE-V Posted March 8, 2008 Share Posted March 8, 2008 driver gives random kernel panics...desperately want to uninstall, still dont know how properly Link to comment Share on other sites More sharing options...
buddahbrot Posted March 9, 2008 Share Posted March 9, 2008 the links in the first post are down, can so reupp them? Link to comment Share on other sites More sharing options...
Ethan021 Posted March 11, 2008 Share Posted March 11, 2008 anyone have a fix for the replug thing? or a dload of this if you do please post here also praysis can you get diff links there down and i really want this . thanks -Ethan Link to comment Share on other sites More sharing options...
Recommended Posts