NMZI Posted May 27, 2019 Share Posted May 27, 2019 (edited) 20 minutes ago, carlo_67 said: 5770 has no native support in Mojave, you will find support 7000 series ..oooonooo... 5770 fell out... The R7 360 has remained. I try 0x665C1002 id, it works for HighSierra. The same result. ioconsoleusers gioscreenlockstate....... Edited May 27, 2019 by NMZI Link to comment Share on other sites More sharing options...
carlo_67 Posted May 27, 2019 Share Posted May 27, 2019 @vikwinchester Put these kext in Clove / kext / Other Archivio.zip Link to comment Share on other sites More sharing options...
carlo_67 Posted May 27, 2019 Share Posted May 27, 2019 @NMZI Update Clover, Are you using WEG and lilu in Clover / kext? Do not use injectATI flag 1 Link to comment Share on other sites More sharing options...
NMZI Posted May 28, 2019 Share Posted May 28, 2019 (edited) 10 hours ago, carlo_67 said: Update Clover, Are you using WEG and lilu in Clover / kext? Do not use injectATI flag Added 0x665F1002 id in AMD8000Controller.kext and AMDRadeonX4000.kext Contents/info.plist Inject 0x665C1002 id in CLOVER/DEVICES/Fake ID/ATI, +InjectATI, +RadeonDeInit (This config work on HighSierra) I try in the night: Clover 4920, 4934 and... latest lilu and whateverGreen in EFI/CLOVER/kexts/10.14, + or - fixDisplay, + or - injectATI, + or - RadeonDeInit, hdmi or displayport, but no result. Edited May 28, 2019 by NMZI Link to comment Share on other sites More sharing options...
vikwinchester Posted May 28, 2019 Share Posted May 28, 2019 (edited) So, my current config looks like this: Hardware: FX-4300 (Piledriver, 15h Gen2 Family) ASUS M5A97 R2.0 8GB RAM HD5770 Kext list: AHCIPortInjector AppleALC FakeSMC GenericUSBXHCI Lilu NullCPUPowerManagement RealtekRTL8111 WhateverGreen XLNCUSBFix Clover config: AMD Vanilla GitHub repo Boot args in Clover: -v npci=0x2000 USBBusFix=Yes and my BIOS settings looks like this, all SATA ports set to AHCI mode, Legacy USB Support and EHCI Hand-Off set to enabled. @Shaneee I've insert my USB stick to the usb 2.0 ports which are straight-to-motherboard. I was trying to change them while getting "Still waiting" error but no luck, I've still got a bunch of errors that you can see on the last jpg I've attached. Maybe I'm missing some kext? I'm not sure if I should use USBInjectAll? Also should I change something in config.plist? I'm using Vanilla generic config right now, the only thing I change is USBBusFix=Yes argument. Edited May 28, 2019 by vikwinchester edit some things Link to comment Share on other sites More sharing options...
carlo_67 Posted May 28, 2019 Share Posted May 28, 2019 13 hours ago, NMZI said: Added 0x665F1002 id in AMD8000Controller.kext and AMDRadeonX4000.kext Contents/info.plist Inject 0x665C1002 id in CLOVER/DEVICES/Fake ID/ATI, +InjectATI, +RadeonDeInit (This config work on HighSierra) I try in the night: Clover 4920, 4934 and... latest lilu and whateverGreen in EFI/CLOVER/kexts/10.14, + or - fixDisplay, + or - injectATI, + or - RadeonDeInit, hdmi or displayport, but no result. Try putting kext only in Other, do not use + or - fixDisplay, + or - injectATI, + or - RadeonDeInit hdmi or displayport Link to comment Share on other sites More sharing options...
NMZI Posted May 28, 2019 Share Posted May 28, 2019 (edited) 39 minutes ago, carlo_67 said: Try putting kext only in Other, do not use + or - fixDisplay, + or - injectATI, + or - RadeonDeInit hdmi or displayport I putt the kexts in EFI/Clover/kexts/Other ... ...no results... but!!! I try clean install 10.14.4 ...get to this point: Select your keyboard! then the window disappears and then restarts. Edited May 28, 2019 by NMZI Link to comment Share on other sites More sharing options...
Shaneee Posted May 28, 2019 Author Share Posted May 28, 2019 Rebooting on user account creation is a known error on FX. See the steps in Terminal to work around it by XLNC here, https://www.insanelymac.com/forum/topic/335877-amd-mojave-kernel-development-and-testing/?page=7&tab=comments#comment-2658085 1 Link to comment Share on other sites More sharing options...
carlo_67 Posted May 28, 2019 Share Posted May 28, 2019 Mount the hdisk in your macbook and finish the installation, then replace it 1 Link to comment Share on other sites More sharing options...
NMZI Posted May 29, 2019 Share Posted May 29, 2019 (edited) @Shaneee I thought if carlo_67 was working at 10.14.5, working for me too. His signature was FX8350. My CPU FX8300. I'm sorry for my mistake! carlo_67 is a very lucky guy with no problem 10.14.5. This XLNC pathed kernel only work in 10.14.1? https://www.insanelymac.com/applications/core/interface/file/attachment.php?id=318002 @ Carlo_67 In the first round I cloned 1 completed 10.14.5 installation from my intel laptop. I couldn't start it. :https://www.insanelymac.com/forum/topic/337984-amd-vanilla-kernel/?page=3&tab=comments#comment-2675323 In second round clean install 10.14.4. my amd pc. Then this error. : https://www.insanelymac.com/forum/topic/337984-amd-vanilla-kernel/?page=4&tab=comments#comment-2675434 Edited May 29, 2019 by NMZI Link to comment Share on other sites More sharing options...
Amici Posted June 9, 2019 Share Posted June 9, 2019 got stuck at plus line +++++++, i tried to change aptiofix osxfix doesnt work, any suggest? Link to comment Share on other sites More sharing options...
Max Mesa Posted June 10, 2019 Share Posted June 10, 2019 15 hours ago, Amici said: got stuck at plus line +++++++ Is your version of Mac OS X supported by patches? Link to comment Share on other sites More sharing options...
Amici Posted June 10, 2019 Share Posted June 10, 2019 3 hours ago, El'Xsanori Leo said: Is your version of Mac OS X supported by patches? yes highsierra 17G65 Link to comment Share on other sites More sharing options...
Bazingaa Posted July 1, 2019 Share Posted July 1, 2019 (edited) Though i was able to procure files from mega, I am unable to understand why am i not able to update, Edited March 14, 2020 by Bazingaa Link to comment Share on other sites More sharing options...
Eruil Posted July 8, 2019 Share Posted July 8, 2019 On 5/28/2019 at 2:52 PM, Shaneee said: i made a macos usb installer following this guide: https://vanilla.amd-osx.com . when i try to boot it with clover bootloader shows this screen and im stuck with it how can i install mojave 18f132 ? i got an asus prime a320m-k motherboard with ryzen 3 2200g processor. Link to comment Share on other sites More sharing options...
Shaneee Posted July 8, 2019 Author Share Posted July 8, 2019 @Eruil Seems like either the installer is corrupt or your config doesn’t have the correct patches. Link to comment Share on other sites More sharing options...
linjimmy Posted July 10, 2019 Share Posted July 10, 2019 AMD Ryzen ZEN 2 3600 HACKINTOSH test successfully July 10, 2019 Very happy to inform AMD users, linjimmy has been installed and tested successfully. CINEBENCH_R15 OPENGL TEST The graphics card runs normally. AMD ZEN2 3600+AMD RX 560 4G is 103.59fps lol AMD ZEN 1700+AMD RX 560 4G is 73.29fps low Thanks Shaneee 2 Link to comment Share on other sites More sharing options...
Mison Posted July 10, 2019 Share Posted July 10, 2019 2 hours ago, linjimmy said: AMD Ryzen ZEN 2 3600 HACKINTOSH test successfully July 10, 2019 Very happy to inform AMD users, linjimmy has been installed and tested successfully. CINEBENCH_R15 OPENGL TEST The graphics card runs normally. AMD ZEN2 3600+AMD RX 560 4G is 103.59fps lol AMD ZEN 1700+AMD RX 560 4G is 73.29fps low Thanks Shaneee It seems that you are not the first one. https://forum.amd-osx.com/viewtopic.php?f=55&t=8869 1 Link to comment Share on other sites More sharing options...
kundica Posted July 11, 2019 Share Posted July 11, 2019 Swapped the 2700x in my build for a 3900x. System booted fine and CPU is running well using Clover patches My RVII seems to have lost hardware acceleration after swapping the CPU so I'm still working on a solution for my GPU. Maybe someone here can shed a light on it. RAM is running fine at 3733 16-15-15-32 1.375v 1 Link to comment Share on other sites More sharing options...
kundica Posted July 12, 2019 Share Posted July 12, 2019 On 7/10/2019 at 7:22 AM, linjimmy said: AMD Ryzen ZEN 2 3600 HACKINTOSH test successfully July 10, 2019 Very happy to inform AMD users, linjimmy has been installed and tested successfully. CINEBENCH_R15 OPENGL TEST The graphics card runs normally. AMD ZEN2 3600+AMD RX 560 4G is 103.59fps lol AMD ZEN 1700+AMD RX 560 4G is 73.29fps low Thanks Shaneee Did you do anything special for your GPU? After updated from 2700x to 3900x my Radeon VII no longer has acceleration and isn't recognized as an OpenCL device for benches. I tried updating to the latest Lilu and Whatevergreen but it doesn't change. Before I swapped CPUs I didn't need to run Whatevergreen at all. Link to comment Share on other sites More sharing options...
linjimmy Posted July 18, 2019 Share Posted July 18, 2019 On 7/13/2019 at 2:52 AM, kundica said: Did you do anything special for your GPU? After updated from 2700x to 3900x my Radeon VII no longer has acceleration and isn't recognized as an OpenCL device for benches. I tried updating to the latest Lilu and Whatevergreen but it doesn't change. Before I swapped CPUs I didn't need to run Whatevergreen at all. Radeon VII Requires 10.14.5+ Radeon VII may be required Boot Arguments Add to : agdpmod=pikera Link to comment Share on other sites More sharing options...
kundica Posted July 18, 2019 Share Posted July 18, 2019 Radeon VII Requires 10.14.5+ Radeon VII may be required Boot Arguments Add to : agdpmod=pikeraI'm running 10.14.5. I was also running the same system with a 2700x and my GPU worked fine. All I did was swap the 2700x for a 3900x and my GPU lost acceleration.Sent from my LG V30 using Tapatalk Link to comment Share on other sites More sharing options...
linjimmy Posted July 18, 2019 Share Posted July 18, 2019 5 minutes ago, kundica said: I'm running 10.14.5. I was also running the same system with a 2700x and my GPU worked fine. All I did was swap the 2700x for a 3900x and my GPU lost acceleration. Sent from my LG V30 using Tapatalk BIOS- PEG 16X AUTO to GEN3 test Link to comment Share on other sites More sharing options...
linjimmy Posted July 18, 2019 Share Posted July 18, 2019 (edited) 14 minutes ago, kundica said: I'm running 10.14.5. I was also running the same system with a 2700x and my GPU worked fine. All I did was swap the 2700x for a 3900x and my GPU lost acceleration. Sent from my LG V30 using Tapatalk May be an NVRAM problem, please try to press F11 in CLOVER and then initialize the BIOS. If you still have problems, try: CMOS clear, disconnect the power cord, more than 10-20 minutes. Try again. Because some motherboard settings information is recorded inside the AMD CPU. Buckle the battery, as shown below Edited July 18, 2019 by linjimmy Link to comment Share on other sites More sharing options...
kundica Posted July 18, 2019 Share Posted July 18, 2019 (edited) 14 hours ago, linjimmy said: BIOS- PEG 16X AUTO to GEN3 test This solved the GPU issue. Thanks a ton! It's worth mentioning that the system becomes unstable after several minutes and reboots. It only happens when the GPU is recognized correctly. Sent from my LG V30 using Tapatalk Edited July 18, 2019 by kundica Link to comment Share on other sites More sharing options...
Recommended Posts